A. Bourg, A. Latrobe, P. Laty, G. Kreziak, and C. Rigaut, Predicting the mold filling time with Simulor, Proc. NUMIFORM'92 Int. Conf. on Numerical Modelling of Forming Processes, J.L

M. Barkhudarov, H. You, J. Ortega, J. Beech, S. B. Chin et al., Experimental validation and development of Flow-3D for casting problems, Proc. 6 th Int. Conf. on Modelling of Casting, Welding and Advanced Solidification Processes The Minerals Metals and Materials Society, pp.421-434, 1993.

D. M. Waite and M. T. Samonds, Finite element free surface modeling, Proc. 6 th Int. Conf. on Modeling of Casting, Welding and Advanced Solidification Processes The Minerals Metals and Materials Society, pp.357-364, 1993.

R. Codina, U. Schäfer, and E. Oñate, Mould filling simulation using finite elements, International Journal of Numerical Methods for Heat & Fluid Flow, vol.4, issue.4, pp.291-310, 1994.
DOI : 10.1108/EUM0000000004108

R. W. Lewis, A. S. Usmani, and J. T. Cross, Efficient mould filling simulation in castings by an explicit finite element method, International Journal for Numerical Methods in Fluids, vol.3, issue.6, pp.493-506, 1995.
DOI : 10.1002/fld.1650200606

F. Mampaey and Z. A. Xu, Simulation and experimental validation of mold filling, Proc. 7 th Int

J. D. Zhu and I. Ohnaka, Computer simulation of fluid flow and heat transfer in partially reinforced casting, Proc. 7th Int. Conf. on Modeling of Casting, Welding and Advanced Solidification Processes The Minerals Metals and Materials Society, pp.23-30, 1995.

M. Médale and M. Jaeger, NUMERICAL SIMULATION OF INCOMPRESSIBLE FLOWS WITH MOVING INTERFACES, International Journal for Numerical Methods in Fluids, vol.32, issue.2, pp.615-638, 1997.
DOI : 10.1002/(SICI)1097-0363(19970330)24:6<615::AID-FLD514>3.0.CO;2-H

C. W. Hirt and B. D. Nichols, Volume of fluid (VOF) method for the dynamics of free boundaries, Journal of Computational Physics, vol.39, issue.1, pp.201-225, 1981.
DOI : 10.1016/0021-9991(81)90145-5

S. E. Navti, K. Ravindran, C. Taylor, and R. W. Lewis, Finite element modelling of surface tension effects using a Lagrangian-Eulerian kinematic description, Computer Methods in Applied Mechanics and Engineering, vol.147, issue.1-2, pp.147-188, 1997.
DOI : 10.1016/S0045-7825(97)00017-0

R. W. Lewis, S. E. Navti, and C. Taylor, A mixed Lagrangian-Eulerian approach to modelling fluid flow during mould filling, International Journal for Numerical Methods in Fluids, vol.4, issue.8, pp.931-952, 1997.
DOI : 10.1002/(SICI)1097-0363(19971030)25:8<931::AID-FLD594>3.0.CO;2-1

L. Gaston, A. Kamara, and M. Bellet, An Arbitrary Lagrangian-Eulerian finite element approach to non-steady state turbulent fluid flow with application to mold filling in Casting, Int. J

O. Jaouen, Modélisation tridimensionnelle par éléments finis pour l'analyse thermomécanique du refroidissement des pièces coulées (Three-dimensional finite element modelling for the, p.24

M. Bellet and O. Jaouen, Finite element approach of thermomechanics of solidification processes On Cutting Edge of Computer Simulation of Solidification and Casting, Proc. Int. Conf, pp.173-190, 1999.

M. Bellet and O. , Jaouen and I. Poitrault, An ALE-FEM Approach to the thermomechanics of solidification processes with application to the prediction of pipe shrinkage

. Svensson, Thermomechanics of the cooling stage in casting processes: 3D finite element analysis and experimental validation, Metall. and Mat. Trans, pp.27-81, 1996.

D. N. Arnold, F. Brezzi, and M. Fortin, A stable finite element for the stokes equations, Calcolo, vol.21, issue.4, pp.337-352, 1984.
DOI : 10.1007/BF02576171

M. Fortin and A. Fortin, Experiments with several elements for viscous incompressible flows, International Journal for Numerical Methods in Fluids, vol.4, issue.10, pp.911-928, 1985.
DOI : 10.1002/fld.1650051005

E. C. Lemmon, Multidimensional integral phase change approximations for finite element conduction codes, Numerical Methods in Heat Transfer, pp.201-214, 1981.

W. D. Bennon and F. P. Incropera, A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems???I. Model formulation, International Journal of Heat and Mass Transfer, vol.30, issue.10, pp.2161-2170, 1987.
DOI : 10.1016/0017-9310(87)90094-9

C. Prakash and V. Voller, ON THE NUMERICAL SOLUTION OF CONTINUUM MIXTURE MODEL EQUATIONS DESCRIBING BINARY SOLID-LIQUID PHASE CHANGE, Numerical Heat Transfer, Part B: Fundamentals, vol.15, issue.2, pp.171-189, 1989.
DOI : 10.1016/0017-9310(87)90317-6

N. Ahmad, Numerical simulation of transport processes in multicomponent systems related to solidification problems, 1995.

A. N. Brooks and T. J. Hughes, Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations, Computer Methods in Applied Mechanics and Engineering, vol.32, issue.1-3, pp.32-199, 1982.
DOI : 10.1016/0045-7825(82)90071-8

T. Kämpfer, Modeling of macrosegregation using an adaptive domain decomposition method, 2002.

W. G. Gray, An efficient finite element scheme for two-dimensional surface water computation, Finite Elements in Water Resources, pp.4-33, 1977.

M. S. Engelman, R. L. Sani, and P. M. Gresho, The implementation of normal and/or tangential boundary conditions in finite element codes for incompressible fluid flow, International Journal for Numerical Methods in Fluids, vol.47, issue.3, pp.225-238, 1982.
DOI : 10.1002/fld.1650020302

M. Bellet, Implementation of surface tension with wall adhesion effects in a three-dimensional finite element model for fluid flow, Communications in Numerical Methods in Engineering, vol.2, issue.8, pp.563-579, 2001.
DOI : 10.1002/cnm.430
URL : https://hal.archives-ouvertes.fr/hal-00575977

J. L. Chenot and M. Bellet, The ALE method for the numerical simulation of material forming processes, Proc. Numiform'95, 5th Int. Conf. on Numerical Methods in Industrial Forming Processes Balkema, pp.39-48, 1995.

O. Pironneau, Méthodes des éléments finis pour les fluides (Finite element method for fluid flow), in french, p.25, 1988.

G. De-vahl, I. P. Davis, and . Jones, Natural convection in a square cavity: A comparison exercise, International Journal for Numerical Methods in Fluids, vol.3, issue.3, pp.227-248, 1983.
DOI : 10.1002/fld.1650030304

D. De-vahl, Natural convection of air in a square cavity: A bench mark numerical solution, International Journal for Numerical Methods in Fluids, vol.12, issue.3, pp.249-264, 1983.
DOI : 10.1002/fld.1650030305

L. Gaston, Simulation numérique par éléments finis bidimensionnels du remplissage de moules de fonderie et étude expérimentale sur maquette hydraulique (Two-dimensional finite element numerical simulation of the filling of casting moulds and experimental study on a water model, Ecole des Mines de Paris, 1997.

H. Combeau, F. Roch, J. C. Chevrier, I. Poitrault, and G. Lesoult, Numerical Study of heat and mass transfer during solidification of steel ingots, Advanced Computational Methods in Heat Transfer, pp.79-90, 1990.

N. Ahmad, H. Combeau, J. Desbiolles, T. Jalanti, G. Lesoult et al., Numerical simulation of macrosegregation: a comparison between finite volume method and finite element method predictions and a confrontation with experiments, Metallurgical and Materials Transactions A, vol.9, issue.2, pp.29-617, 1997.
DOI : 10.1007/s11661-998-0143-9