D. G. Eskin and L. Katgerman, A Quest for a New Hot Tearing Criterion, Metallurgical and Materials Transactions A, vol.336, issue.1, p.1511, 2007.
DOI : 10.1007/s11661-007-9169-7

Y. M. Won, T. J. Yeo, D. J. Seol, and K. Oh, A new criterion for internal crack formation in continuously cast steels, Metallurgical and Materials Transactions B, vol.24, issue.4, p.779, 2000.
DOI : 10.1007/s11663-000-0115-y

M. Bellet, O. Cerri, M. Bobadilla, and Y. Chastel, Modeling Hot Tearing during Solidification of Steels: Assessment and Improvement of Macroscopic Criteria through the Analysis of Two Experimental Tests, Metallurgical and Materials Transactions A, vol.7, issue.11, p.2705, 2009.
DOI : 10.1007/s11661-009-9955-5
URL : https://hal.archives-ouvertes.fr/hal-00487265

M. Rappaz, J. M. Drezet, and M. Gremaud, A new hot-tearing criterion, Metallurgical and Materials Transactions A, vol.26, issue.2, p.449, 1999.
DOI : 10.1007/s11661-999-0334-z

M. Suzuki, C. H. Yu, and T. Emi, In-Situ Measurement of Fracture Strength of Solidifying Steel Shells to Predict Upper Limit of Casting Speed in Continuous Caster with Oscillating Mold., ISIJ International, vol.37, issue.4, p.375, 1997.
DOI : 10.2355/isijinternational.37.375

C. Bernhard and G. Xia, Influence of alloying elements on the thermal contraction of peritectic steels during initial solidification, Ironmaking & Steelmaking, vol.149, issue.1, p.52, 2006.
DOI : 10.1007/s11663-997-0095-2

K. Kim, K. H. Oh, and D. Lee, Mechanical behavior of carbon steels during continuous casting, Scripta Materialia, vol.34, issue.2, p.301, 1996.
DOI : 10.1016/1359-6462(95)00497-1

D. J. Seol, Y. M. Won, T. J. Yeo, K. H. Oh, and J. Park, High Temperature Deformation Behavior of Carbon Steel in the Austenite and .DELTA.-Ferrite Regions., ISIJ International, vol.39, issue.1, p.91, 1999.
DOI : 10.2355/isijinternational.39.91

D. J. Seol, Y. M. Won, K. H. Oh, Y. C. Shin, and C. Yim, Mechanical Behavior of Carbon Steels in the Temperature Range of Mushy Zone., ISIJ International, vol.40, issue.4, p.356, 2000.
DOI : 10.2355/isijinternational.40.356

S. Brown, J. D. James, and J. A. Spittle, A 3D numerical model of the temperature - time characteristics of specimens tested on a Gleeble thermomechanical simulator, Modelling and Simulation in Materials Science and Engineering, vol.5, issue.6, p.539, 1997.
DOI : 10.1088/0965-0393/5/6/001

S. D. Norris and I. Wilson, Application of 3D numerical modelling for thermal profile optimization on the Gleeble thermomechanical simulator, Modelling and Simulation in Materials Science and Engineering, vol.7, issue.3, p.297, 1999.
DOI : 10.1088/0965-0393/7/3/301

M. Bellet and V. Fachinotti, ALE method for solidification modelling, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.39-41, p.4355, 2004.
DOI : 10.1016/j.cma.2003.11.016
URL : https://hal.archives-ouvertes.fr/hal-00531192

B. G. Thomas, M. Bellet, . Asm, and . Handbook, Casting Division 4: Modeling and Analysis of Casting Processes, p.449, 2008.

M. Bellet and A. Heinrich, A Two-dimensional Finite Element Thermomechanical Approach to a Global Stress-Strain Analysis of Steel Continuous Casting, ISIJ International, vol.44, issue.10, p.1686, 2004.
DOI : 10.2355/isijinternational.44.1686
URL : https://hal.archives-ouvertes.fr/hal-00531205

M. Bellet, F. Decultieux, M. Menai, F. Bay, C. Levaillant et al., Thermomechanics of the cooling stage in casting processes: Three-dimensional finite element analysis and experimental validation, Metallurgical and Materials Transactions B, vol.112, issue.2, p.81, 1996.
DOI : 10.1007/BF02915080
URL : https://hal.archives-ouvertes.fr/hal-01420915

M. G. Lee, S. J. Kim, H. N. Han, and W. Jeong, Implicit finite element formulations for multi-phase transformation in high carbon steel, International Journal of Plasticity, vol.25, issue.9, p.1726, 2009.
DOI : 10.1016/j.ijplas.2008.11.010

S. Ankem, H. Margolin, C. A. Greene, B. W. Neuberger, and P. Oberson, Mechanical properties of alloys consisting of two ductile phases, Progress in Materials Science, vol.51, issue.5, p.632, 2006.
DOI : 10.1016/j.pmatsci.2005.10.003

K. Harste and K. Schwerdtfeger, Thermomechanical properties of iron: viscoplasticity of ferrite and of austenite???ferrite mixtures, Materials Science and Technology, vol.67, issue.12, p.378, 1996.
DOI : 10.1179/030716981803275712

P. F. Kozlowski, B. G. Thomas, J. A. Azzi, and W. Hao, Simple constitutive equations for steel at high temperature, Metallurgical Transactions A, vol.5, issue.6, p.903, 1992.
DOI : 10.1007/BF02675567

H. Mizukami, Y. Shirai, and A. Yamanaka, Prediction of Tensile Strength and Elongation of High Alloy Steels during Solidification, ISIJ International, vol.46, issue.7, p.1040, 2006.
DOI : 10.2355/isijinternational.46.1040

S. Koric and B. Thomas, Thermo-mechanical models of steel solidification based on two elastic visco-plastic constitutive laws, Journal of Materials Processing Technology, vol.197, issue.1-3, p.408, 2008.
DOI : 10.1016/j.jmatprotec.2007.06.060