K. Ammar, B. Appolaire, G. Cailletaud, F. Feyel, and S. Forest, Finite element formulation of a phase field model based on the concept of generalized stresses, Comput. Mat. Sc, vol.45, pp.800-805, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00379237

K. Ammar, B. Appolaire, G. Cailletaud, and S. Forest, Combining phase field approach and homogenization methods for modelling phase transformation in elastoplastic media, Eur. J. Comput. Mech, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00461463

M. Apel, S. Benke, and I. Steinbach, Virtual dilatometer curves and effective young's modulus of a 3d multiphase structure calculated by the phase-field method, Comput. Mater. Sci, vol.45, pp.589-592, 2009.

A. Artemev, Y. Wang, and A. Khachaturyan, Three-dimensional phase field model and simulation of martensitic transformation in multilayer systems under applied stresses, Acta. Mater, vol.48, issue.10, pp.2503-2518, 2000.

F. Barbe, L. Decker, D. Jeulin, and G. Cailletaud, Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: F.E. model, Int. J. Plasticity, vol.17, pp.513-536, 2001.
URL : https://hal.archives-ouvertes.fr/hal-02327393

F. Barbe, S. Forest, and G. Cailletaud, Intergranular and intragranular behavior of polycrystalline aggregates. Part 2: results, Int. J. Plasticity, vol.17, pp.537-563, 2001.
URL : https://hal.archives-ouvertes.fr/hal-02327393

F. Barbe, S. Forest, and G. Cailletaud, Polycrystalline plasticity under small strains, NATO Proceedings, Physical Aspects of Fracture, pp.191-206, 2001.
URL : https://hal.archives-ouvertes.fr/hal-02327413

F. Barbe, R. Quey, A. Musienko, and G. Cailletaud, Three-dimensional characterization of strain localization bands in high resolution elastoplastic polycrystals, Mech. Res. Comm, vol.36, pp.762-768, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00423757

F. Barbe, R. Quey, and L. Taleb, Numerical modelling of the plasticity induced during diffusive transformation. Case of a cubic array of nuclei, Eur. J. Mech., A/Solids, vol.26, pp.611-625, 2007.
URL : https://hal.archives-ouvertes.fr/hal-02327339

F. Barbe, R. Quey, L. Taleb, and E. Souza-de-cursi, Numerical determination of the effective TRIP during diffusive transformation in a volume with randomly positioned nuclei, Proc 1st Int Conf Distortion Engineering, pp.149-156, 2005.

F. Barbe, R. Quey, L. Taleb, and E. Souza-de-cursi, Numerical modelling of the plasticity induced during diffusive transformation. An ensemble averaging approach for the case of random arrays of nuclei, Eur. J. Mech., A/Solids, vol.27, pp.1121-1139, 2008.
URL : https://hal.archives-ouvertes.fr/hal-02327339

J. Besson, R. Leriche, R. Foerch, and G. Cailletaud, Object-Oriented Programming Applied to the Finite Element Method. Part II. Application to Material Behaviors, Revue Européenne desÉléments Finis, vol.7, issue.5, pp.567-588, 1998.

G. R. Canova, H. R. Wenk, and A. Molinari, Deformation modelling of multi-phase polycrystals: case of quartz-mica aggregate, Acta Metall. Mater, vol.40, issue.7, pp.1519-1530, 1992.

M. Coret, S. Calloch, and A. Combescure, Experimental study of the phase transformation plasticity of 16MND5 low carbon steel induced by proportional and nonproportional biaxial loading paths, Eur. J. Mech., A/Solids, vol.23, pp.823-842, 2004.
URL : https://hal.archives-ouvertes.fr/hal-01006855

S. Denis, E. Gautier, S. Sjöström, and A. Simon, Influence of stresses on the kinetics of pearlitic transformation during continuous cooling, Acta Metall, vol.35, pp.1621-1632, 1987.

O. Diard, S. Leclercq, G. Rousselier, and G. Cailletaud, Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity. Application to crystal plasticity model identification and the study of stress and strain fields near grain boundaries, Int. J. Plasticity, vol.21, pp.691-722, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00165134

F. D. Fischer, A micromechanical model for transformation plasticity in steels, Acta Metall. Mater, vol.38, pp.1536-1546, 1990.

F. D. Fischer, G. Reisner, E. Werner, K. Tanaka, G. Cailletaud et al., A new view on transformation induced plasticity (TRIP), Int. J. Plasticity, vol.16, pp.723-748, 2000.

P. Franciosi, The Concepts of Latent Hardening and Strain Hardening in Metallic Single Crystals, Acta Metall, vol.33, pp.1601-1612, 1985.

J. F. Ganghoffer, S. Denis, E. Gautier, A. Simon, and S. Sjöström, Finite element calculation of the micromechanics of a diffusional transformation, Eur. J. Mech., A/Solids, vol.12, issue.1, pp.21-32, 1993.

J. F. Ganghoffer and K. Simonsson, A micromechanical model of the martensitic transformation, Mech. Mater, vol.27, pp.125-144, 1998.

A. Gaubert, Y. Le-bouar, and A. Finel, Coupling phase field and visco-plasticity to study rafting in ni-base superalloys, Phil. Mag, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00556061

E. Gautier, A. Simon, and G. Beck, Plasticité de transformation durant la transformation perlitique d'un acier eutectoïde, Acta Metall, vol.35, pp.1367-1375, 1987.

C. Gérard, F. N'guyen, N. Osipov, G. Cailletaud, M. Bornert et al., Comparison of experimental results and finite element simulation of strain localization scheme under cyclic loading, Comput. Mater. Sci, vol.46, pp.755-760, 2009.

A. Gourgues, Application of electron backscatter diffraction to the study of phase transformations, Int. Mater. Rev, vol.52, issue.2, pp.65-128, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00146341

S. Grostabussiat, L. Taleb, and J. F. Jullien, Experimental results on classical plasticity of steels subjected to structural transformations, Int. J. Plasticity, vol.20, issue.8-9, pp.1371-1386, 2004.

H. Hoang, Modélisation numérique de la plasticité des transformations de phase diffusivesà l'état solide, 2008.

H. Hoang, F. Barbe, R. Quey, and L. Taleb, FE determination of the plasticity induced during diffusive transformation in the case of nucleation at random locations and instants, Comput. Mater. Sci, vol.43, pp.101-107, 2007.

C. Huang, D. J. Browne, and S. Mcfadden, A phase-field simulation of austenite to ferrite transformation kinetics in low carbon steels, Acta Mater, vol.54, issue.1, pp.11-21, 2006.

T. Inoue and Z. Wang, Coupling between stress, temperature, and metallic structures during processes involving phase transformations, Mater. Sc. Technol, vol.1, pp.845-849, 1985.

T. Iwamoto, M. Cherkaoui, and E. Busso, A finite element-based level-set method of an interface motion driven by adiffusion field: Application to a phase transformation problem, Comput. Mater. Sci, vol.44, pp.792-801, 2008.

A. T. Kempen, F. Sommer, and E. J. Mittermeijer, The kinetics of the autenite-ferrite phase transformation of Fe-Mn: differential thermal analysis during cooling, Acta Mater, vol.50, pp.3545-3555, 2002.

Y. Lan, N. Xiao, D. Li, and Y. Li, Mesoscale simulation of deformed austenite decomposition into ferrite by coupling a cellular automaton method with a crystal plasticity finite element model, Acta Mater, vol.53, issue.4, pp.991-1003, 2005.

H. Landheer, S. Offerman, R. Petrov, and L. Kestens, The role of crystal misorientations during solid-state nucleation of ferrite in austenite, Acta Mater, vol.57, pp.1486-1496, 2009.

R. Lebensohn, M. Montagnat, P. Mansuy, P. Duval, J. Meysonnier et al., Modeling viscoplastic behavior and heterogeneous intracrystalline deformation of columnar ice polycrystals, Acta Mater, vol.57, pp.1405-1415, 2009.
URL : https://hal.archives-ouvertes.fr/insu-00420863

J. B. Leblond, Mathematical modelling of transformation plasticity in steels II: coupling with strain hardening phenomena, Int. J. Plasticity, vol.5, pp.573-591, 1989.

J. B. Leblond, J. Devaux, and J. C. Devaux, Mathematical modelling of transformation plasticity in steels I: case of ideal-plastic phases, Int. J. Plasticity, vol.5, pp.551-572, 1989.

J. B. Leblond, G. Mottet, and J. C. Devaux, A theoretical and numerical approach to the plastic behavior of steels during phase transformations I: derivation of general relations, J. Mech. Phys. Sol, vol.34, issue.4, pp.395-409, 1986.

F. Lecroisey and A. Pineau, Martensitic Transformations Induced by Plastic Deformation in the Fe-Ni-Cr-C System, Metall. Trans, vol.3, pp.387-396, 1972.

M. Lee, S. Kim, and H. N. Han, Crystal plasticity finite element modeling of mechanically induced martensitic transformation (mimt) in metastable austenite, Int. J. Plasticity, vol.26, issue.5, pp.688-710, 2010.

V. Levitas and D. Lee, Athermal resistance to an interface motion in phase field theory of microstructure evolution, Phys. Rev. Let, vol.99, p.245701, 2007.

V. I. Levitas, D. Lee, and D. L. Preston, Interface propagation and microstructure evolution in phase field models of stress-induced martensitic phase transformations, Int. J. Plasticity, vol.26, issue.3, pp.395-422, 2010.

Y. Liu, F. Sommer, and E. Mittemeijer, The austenite-ferrite transformation of ultralow-carbon fe-c alloy; transition from diffusion-to interface-controlled growth, Acta Mater, vol.54, issue.12, pp.3383-3393, 2006.

R. Mahnken, A. Schneidt, and T. Antretter, Macro modelling and homogenization for transformation induced plasticity of a low-alloy steel, Int. J. Plasticity, vol.25, pp.183-204, 2009.

J. Majta and A. K. Zurek, Modeling of ferrite structure after deformation in the two-phase region, Int. J. Plasticity, vol.19, issue.5, pp.707-730, 2003.

S. Manchiraju and P. Anderson, Coupling between martensitic phase transformations and plasticity: A microstructure-based finite element model, Int. J. Plasticity, 2010.

M. G. Mecozzi, J. Sietsma, and S. Van-der-swaag, Analysis of ? ?? ? transformation in a Nb micro-alloyed C-Mn steel by phase field modelling, Acta Mater, vol.54, pp.1431-1440, 2006.

M. G. Mecozzi, J. Sietsma, and S. Van-der-swaag, Phase field modelling of the interfacial condition at the moving interphase during the ? ?? ? transformation in C-Mn steels, Comput. Mater. Sci, vol.34, pp.290-207, 2006.

S. Meftah, F. Barbe, L. Taleb, and F. Sidoroff, Parametric Numerical Simulations of TRIP and its Interaction with Classical Plasticity in Martensitic Transformation, Eur. J. Mech., A/Solids, vol.26, issue.4, pp.688-700, 2007.
URL : https://hal.archives-ouvertes.fr/hal-02327345

L. Méric, P. Poubanne, and G. Cailletaud, Single Crystal Modeling for Structural Calculations. Part 1: Model Presentation, J. Eng. Mater. Technol, vol.113, pp.162-170, 1991.

G. Mohapatra, F. Sommer, and E. Mittemeijer, The austenite to ferrite transformation of fe-ni under the influence of a uniaxially applied tensile stress, Acta Mater, vol.55, issue.13, pp.4359-4368, 2007.

A. Musienko and G. Cailletaud, Simulation of inter-and transgranular crack propagation in polycrystalline aggregates due to stress corrosion cracking, Acta Mater, vol.57, pp.3840-3855, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00413658

A. Musienko, A. Tatschl, K. Schmidegg, R. Pippan, O. Kolednik et al., Threedimensional finite element simulation of a polycrystalline copper specimen, Acta Mater, vol.55, pp.4121-4136, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00165818

K. Nagayama, T. Terasaki, K. Tanaka, F. Fischer, T. Antretter et al., Mechanical properties of a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation, Mater. Sci. Eng. A, vol.308, pp.25-37, 2001.

. Neper, Neper: a software to generate 3D random polycrystals for the finite element method (version 1, 2007.

M. Nygards and P. Gudmundson, Three-dimensional periodic Voronoi grain models and micromechanical FE-simulations of a two-phase steel, Comput. Mater. Sci, vol.24, pp.513-519, 2002.

S. E. Offerman, N. H. Van-dijk, J. Sietsma, E. M. Lauridsen, L. Margulies et al., Phase transformations in steel studied by 3DXRD microscopy, Nuclear Instruments and Methods in Physics Research B, vol.246, pp.194-200, 2006.

S. E. Offerman, L. J. Van-wilderen, N. H. Van-dijk, J. Sietsma, M. T. Rekveldt et al., In-situ study of pearlite nucleation and growth during isothermal austenite decomposition in nearly eutectoid steel, Acta Mater, vol.51, pp.3927-3938, 2003.

G. Olson and M. Cohen, Kinetics of Strain-Induced martensitic nucleation, Metall. Trans. A, vol.6, pp.791-795, 1975.

N. Osipov, A. Gourgues-lorenzon, B. Marini, V. Mounoury, F. N'guyen et al., FE modelling of bainitic steels using crystal plasticity, Phil. Mag, vol.88, issue.30, pp.3757-3777, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00513993

R. Quey and F. Barbe, Free meshing of microstructures based on modified Voronoi tessellations, 17th Int Workshop Computational Mechanics of Materials, 2007.

R. Quey, H. Hoang, F. Barbe, and L. Taleb, Effect of the random spatial distribution of nuclei on the transformation plasticity in a diffusively transforming steel, Int. J. Microstructure Materials Property, 2009.

K. Sai, G. Cailletaud, and S. Forest, Micro-mechanical modeling of the inelastic behavior of directionally solidified materials, Mech. Mater, vol.38, pp.203-217, 2006.

S. Schmidt, U. Olsen, H. Poulsen, H. Sørensen, E. Lauridsen et al., Direct observation of 3-D grain growth in Al-0.1% Mn, Scripta Mater, vol.59, pp.491-494, 2008.

C. Schuh and D. C. Dunand, Non-isothermal transformation-mismatch plasticity: modeling and experiments on Ti-6Al-4V, Acta Mater, vol.49, pp.199-210, 2001.

A. Suiker and S. Turteltaub, Numerical modelling of transformation-induced damage and plasticity in metals, Modelling Simul. Mater. Sci. Eng, vol.15, pp.147-166, 2007.

L. Taleb and S. Petit, New investigations on transformation induced plasticity and its interaction with classical plasticity, Int. J. Plasticity, vol.22, pp.110-130, 2006.

L. Taleb and F. Sidoroff, A micromechanical modeling of Greenwood-Johnson mechanism in transformation induced plasticity, Int. J. Plasticity, vol.19, issue.10, pp.1821-1842, 2003.

R. Thiessen, J. Sietsma, T. Palmer, J. Elmer, and I. Richardson, Phase-field modelling and synchrotron validation of phase transformations in martensitic dual-phase steel, Acta Mater, vol.55, pp.601-614, 2007.

N. Van-dijk, S. Offerman, J. Sietsma, and S. Van-der-zwaag, Barrier-free heterogeneous grain nucleation in polycrystalline materials: The austenite to ferrite phase transformation in steel, Acta Mater, vol.55, issue.13, pp.4489-4498, 2007.

J. C. Videau, G. Cailletaud, and A. Pineau, Experimental study of the transformation induced plasticity in Cr-Ni-Mo-Al-Ti steel, J. Phys. IV, vol.6, pp.465-474, 1995.
URL : https://hal.archives-ouvertes.fr/jpa-00254177

M. Wolff, M. Böhm, M. Dalgic, G. Löwisch, and J. Rath, Validation of a TRIP model with backstress for the pearlitic transformation of the steel 100Cr6 under step-wise loads, Comput. Mater. Sci, vol.39, pp.49-54, 2007.

N. Xiao, M. Tong, Y. Lan, D. Li, and Y. Li, Coupled simulation of the influence of austenite deformation on the subsequent isothermal austenite-ferrite transformation, Acta Mater, vol.54, issue.5, pp.1265-1278, 2006.

A. Zeghadi, S. Forest, A. Gourgues, and O. Bouaziz, Ensemble averaging stress-strain fields in polycrystalline aggregates with a constrained surface microstructure -Part 2: crystal plasticity, Phil. Mag, vol.87, pp.1425-1446, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00513782

M. Zhang and P. Kelly, Crystallographic Features of Phase Transformations in Solids, Prog. Mater. Sci, 2009.

M. Zhang and P. Kelly, The morphology and formation mechanism of pearlite in steels, Materials Characterization, vol.60, pp.545-554, 2009.

Y. Zhao and R. Tryon, Automatic 3-D simulation and micro-stress distribution of polycrystalline metallic materials, Comput. Meth. Appl. Mech. Eng, vol.193, pp.3919-3934, 2004.

C. Zheng, N. Xiao, L. Hao, D. Li, and Y. Li, Numerical simulation of dynamic strain-induced austenite-ferrite transformation in a low carbon steel, Acta Mater, vol.57, pp.2956-2968, 2009.