L. Ajdelsztajn, A. Zuniga, B. Jodoin, and E. J. Lavernia, Cold gas dynamic spraying of a high temperature Al alloy, Surface and Coatings Technology, vol.201, issue.6, pp.2109-211, 2006.
DOI : 10.1016/j.surfcoat.2005.06.001

P. Araujo, D. Chicot, M. Staia, and J. Lesage, Residual stresses and adhesion of thermal spray coatings, Surface Engineering, vol.8, issue.1, pp.35-40, 2005.
DOI : 10.1016/0040-6090(94)90182-1
URL : https://hal.archives-ouvertes.fr/hal-00069790

M. Arrigoni, S. Barradas, M. Braccini, M. Dupeux, M. Jeandin et al., A comparative study of three adhesion tests (EN 582, similar to ASTM C633, LASAT (LASer Adhesion Test), and bulge and blister test) performed on plasma sprayed copper deposited on aluminium 2017 substrates, Journal of Adhesion Science and Technology, vol.83, issue.5, pp.471-487, 2006.
DOI : 10.1163/156856106777144336
URL : https://hal.archives-ouvertes.fr/hal-00140880

G. Bae, K. Kang, H. Na, C. Lee, and H. J. Kim, Thermally Enhanced Kinetic Sprayed Titanium Coating: Microstructure and Property Improvement for Potential Applications, Proceedings of the Expanding Thermal Spray Performance to New Markets and Applications, 2009.

M. F. Bahbou, P. Nylen, and J. Wigren, Effect of Grit Blasting and Spraying Angle on the Adhesion Strength of a Plasma-Sprayed Coating, Journal of Thermal Spray Technology, vol.13, issue.4, pp.508-514, 2004.
DOI : 10.1361/10599630421406

N. Bala, H. Singh, and S. Prakash, High Temperature Corrosion Behavior of Cold Spray Ni-20Cr Coating on Boiler Steel in Molten Salt Environment at 900????C, Journal of Thermal Spray Technology, vol.255, issue.15, pp.110-118, 2010.
DOI : 10.1007/s11666-009-9437-8

G. Barbezat, Advanced thermal spray technology and coating for lightweight engine blocks for the automotive industry, Surface and Coatings Technology, vol.200, issue.5-6, pp.1990-1993, 2005.
DOI : 10.1016/j.surfcoat.2005.08.017

G. Barbezat, Application of thermal spraying in the automobile industry, Surface & Coatings Technology, vol.201, pp.2028-2031, 2006.

S. Barradas, M. Jeandin, C. Bolis, L. Berthe, M. Arrigoni et al., Study of adhesion of PROTAL?? copper coating of Al 2017 using the laser shock adhesion test (LASAT), Journal of Materials Science, vol.39, issue.8, pp.2707-2716, 2004.
DOI : 10.1023/B:JMSC.0000021445.74736.b3
URL : https://hal.archives-ouvertes.fr/hal-00163090

S. Barradas, R. Molins, M. Jeandin, M. Arrigoni, M. Boustie et al., Application of laser shock adhesion testing to the study of the interlamellar strength and coating???substrate adhesion in cold-sprayed copper coating of aluminum, Surface and Coatings Technology, vol.197, issue.1, pp.18-27, 2005.
DOI : 10.1016/j.surfcoat.2004.08.222
URL : https://hal.archives-ouvertes.fr/hal-00153290

S. Barradas, V. Guipont, R. Molins, M. Jeandin, M. Arrigoni et al., Laser Shock Flier Impact Simulation of Particle-Substrate Interactions in Cold Spray, Journal of Thermal Spray Technology, vol.42, issue.4, pp.548-556, 2007.
DOI : 10.1007/s11666-007-9069-9
URL : https://hal.archives-ouvertes.fr/hal-00159062

K. Bobzin, T. Schlafer, T. Warda, and M. Bruhl, Thermally Sprayed Oxidation Protection Coatings for ?-TiAl Substrates, Proceedings of Thermal Spray: Global Solutions for Future Application, 2010.

S. Boileau, V. Guipont, M. Jeandin, M. Nivard, L. Berthe et al., The Laser Shock Adhesion (LASAT) for Production Control of Thermally-Sprayed Ceramic Coatings, Proceedings of Thermal Spray Connects: Explore its Surfacing Potential!, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00159080

M. Boustie, E. Auroux, and J. P. Romain, Application of the laser spallation technique to the measurement of the adhesion strength of tungsten carbide coatings on superalloy substrates, The European Physical Journal Applied Physics, vol.12, issue.1, pp.47-53, 2000.
DOI : 10.1051/epjap:2000170

O. C. Brandt, Mechanical properties of HVOF coatings, Journal of Thermal Spray Technology, vol.22, issue.3, pp.147-152, 1995.
DOI : 10.1007/BF02646105

M. Bray, A. Cockburn, and W. O-'neil, The Laser-assisted Cold Spray process and deposit characterisation, Surface and Coatings Technology, vol.203, issue.19, pp.2851-2857, 2009.
DOI : 10.1016/j.surfcoat.2009.02.135

N. M. Chavan, M. Ramakrishna, S. Phani, P. , S. Rao et al., The influence of process parameters and heat treatment on the properties of cold sprayed silver coatings, Surface and Coatings Technology, vol.205, issue.20, pp.4798-4807, 2011.
DOI : 10.1016/j.surfcoat.2011.04.063

D. K. Christoulis, D. I. Pantelis, F. Borit, V. Guipont, and M. Jeandin, Effect of substrate preparation on flattening of plasma sprayed aluminium bronze powders, Surface Engineering, vol.22, issue.6, pp.420-431, 2006.
DOI : 10.1016/j.surfcoat.2005.02.156
URL : https://hal.archives-ouvertes.fr/hal-00136816

D. K. Christoulis, S. Guetta, V. Guipont, M. H. Berger, M. Jeandin et al., Cold Spraying Combined to Laser Surface Pre-treatment using PROTAL®, Proceedings of the Expanding Thermal Spray Performance to New Markets and Applications, 2009.

D. K. Christoulis, S. Guetta, E. Irissou, V. Guipont, M. H. Berger et al., Cold-Spraying Coupled to Nano-Pulsed Nd-YaG Laser Surface Pre-treatment, Journal of Thermal Spray Technology, vol.83, issue.3, pp.1062-1073, 2010.
DOI : 10.1007/s11666-010-9500-5
URL : https://hal.archives-ouvertes.fr/hal-00542452

D. K. Christoulis, S. Guetta, V. Guipont, and M. Jeandin, The Influence of the Substrate on the Deposition of Cold-Sprayed Titanium: An Experimental and Numerical Study, Journal of Thermal Spray Technology, vol.204, issue.238, pp.523-533, 2011.
DOI : 10.1007/s11666-010-9608-7
URL : https://hal.archives-ouvertes.fr/hal-00592015

S. Costil, C. Coddet, G. Rosa, P. Psyllaki, and R. Oltra, Non Destructive testing for the Estimation of the Adhesion of Plasma Sprayed Coatings, Proceedings of News Surfaces for the New Millenium, 2001.

S. Costil, H. Li, C. Coddet, V. Barnier, and R. Oltra, Role of Laser Surface Activation During Plasma Spray Coating of Metallic Materials, Proceedings of 18 th International Conference on Surface Modification Technologies, 2004.

S. Costil, H. Li, and C. Coddet, New Developments in the PROTAL ® Process, Proceedings of Thermal Spray 2004: Advances in Technology and Application, 2004.

Y. Danlos, S. Costil, H. Liao, and C. Coddet, Influence of Ti???6Al???4V and Al 2017 substrate morphology on Ni???Al coating adhesion ??? Impacts of laser treatments, Surface and Coatings Technology, vol.205, issue.8-9, pp.2702-2708, 2011.
DOI : 10.1016/j.surfcoat.2010.08.147

J. Davis, Handbook of Thermal Spray Technology, 2004.

J. Day, X. Huang, and N. L. Ricfhards, Examination of a Grit-Blasting Process for Thermal Spraying Using Statistical Methods, Journal of Thermal Spray Technology, vol.14, issue.4, pp.471-479, 2005.
DOI : 10.1361/105996305X76469

M. R. Dorfman, M. Nonni, J. Mallon, W. Woodard, and P. Meyer, Thermal Spray Technology Growth in Gas Turbine Coatings, Proceedings of Thermal Spray 2004: Advances in Technology and Application, 2004.

L. Dubourg and C. Moreau, Microstructure and Mechanical Properties of Yttria Partially Stabilized Zirconia Coatings Deposited by Laser-Assisted Air Plasma Spraying, Proceedings of Building on 100 Years of Success: Proceedings of the 2006 International Thermal Spray Conference, 2006.

B. Evans, R. Panza-giosa, C. Brikaras, E. Maitland, and S. , HVOF-Applied WC-CO- Cr as a Hard Chrome Replacement for Landing Gear, Proceedings of Building on 100 Years of Success: Proceedings of the 2006 International Thermal Spray Conference, 2006.

G. Fabre, V. Guipont, M. Jeandin, M. Boustie, J. P. Cuq-lelandais et al., Laser Shock Adhesion Test (LASAT) of Electron Beam Physical Vapor Deposited Thermal Barrier Coatings (EB-PVD TBCs), Advanced Materials Research, vol.278, pp.509-514, 2011.
DOI : 10.4028/www.scientific.net/AMR.278.509
URL : https://hal.archives-ouvertes.fr/hal-00624018

H. Fukanuma and N. Ohno, Influences of Substrate Roughness and Temperature on Adhesive Strength in Thermal Spray Coatings, Proceedings of Thermal Spray 2003: Advancing the Science & Applying the Technology, 2003.

E. Gaffet, D. Michel, L. Mazerolles, and P. Berthet, Effects of High Energy Ball Milling on Ceramic Oxides, Materials Science Forum, vol.235, issue.238, pp.235-238
DOI : 10.4028/www.scientific.net/MSF.235-238.103

D. Garcia-alonso, N. Serres, C. Demian, S. Costil, C. Langlade et al., Pre-/During-/Post-Laser Processes to Enhance the Adhesion and Mechanical Properties of Thermal-Sprayed Coatings with a Reduced Environmental Impact, Journal of Thermal Spray Technology, vol.10, issue.4, pp.719-735, 2011.
DOI : 10.1007/s11666-011-9629-x

F. Gartner, T. Schmidt, T. Stoltenhoff, and H. Kreye, Recent Developments and Potential Applications of Cold Spraying, Advanced Engineering Materials, vol.8, issue.7, pp.611-618, 2006.
DOI : 10.1002/adem.200600048

V. Y. Gertsman and Q. S. Kwok, TEM Investigation of Nanophase Aluminum Powder, Microscopy and Microanalysis, vol.81, issue.05, pp.410-420, 2005.
DOI : 10.1143/JPSJ.59.662

B. T. Golesich and K. Anderson, Effects of Surface Preparation on the Performance of Cold Spray Coatings, Proceeding of 19 th AeroMat Conference & Exposition, pp.23-26, 2008.

W. A. Gonzalez-hermosilla, D. Chicot, J. Lesage, L. Barbera-sosa, J. G. Gruescu et al., Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC???10Co???4Cr cermet, deposited by HVOF thermal spray, Materials Science and Engineering: A, vol.527, issue.24-25, pp.6551-6561, 2010.
DOI : 10.1016/j.msea.2010.07.014

D. J. Greving, J. R. Shadley, E. F. Rybicki, D. J. Greving, J. R. Shadley et al., Effects of coating thickness and residual stresses on the bond strength of ASTM C633-79 thermal spray coating test specimens, Journal of Thermal Spray Technology, vol.9, issue.2, pp.371-378, 1994.
DOI : 10.1007/BF02658982

S. Guetta, M. H. Berger, F. Borit, V. Guipont, M. Jeandin et al., Influence of Particle Velocity on Adhesion of Cold-Sprayed Splats, Journal of Thermal Spray Technology, vol.197, issue.1, pp.331-342, 2009.
DOI : 10.1007/s11666-009-9327-0
URL : https://hal.archives-ouvertes.fr/hal-00481205

V. Guipont, M. Espanol, F. Borit, N. Llorca-isern, M. Jeandin et al., High-pressure plasma spraying of hydroxyapatite powders, Materials Science and Engineering: A, vol.325, issue.1-2, pp.9-18, 2002.
DOI : 10.1016/S0921-5093(01)01414-9

A. C. Hall, D. J. Cook, R. A. Neiser, T. J. Roemer, and D. A. Hirschfeld, The Effect of a Simple Annealing Heat Treatment on the Mechanical Properties of Cold-Sprayed Aluminum, Journal of Thermal Spray Technology, vol.15, issue.2, pp.233-238, 2006.
DOI : 10.1361/105996306X108138

S. Hartmann, New industrial applications for cold spraying, Proceedings of Thermal Spray: Global Solutions for Future Application, 2010.

Y. Ichikawa, K. Sakaguchi, K. Ogawa, T. Shoji, S. Barradas et al., Depostion mechanisms of cold gas dynamic sprayed MCrAlY Coatings, Proceedings of Thermal Spray 2007: Global Coating Solutions, 2007.

Y. Ichikawa, S. Barradas, F. Borit, V. Guipont, M. Jeandin et al., Evaluation of Adhesive Strength of Thermal-Sprayed Hydroxyapatite Coatings Using the LAser Shock Adhesion Test (LASAT), MATERIALS TRANSACTIONS, vol.48, issue.4, pp.793-798, 2007.
DOI : 10.2320/matertrans.48.793
URL : https://hal.archives-ouvertes.fr/hal-00165814

Y. Ichikawa, T. Miyazaki, K. Ogawa, T. Shoji, and M. Jeandin, Deposition Mechanism of Cold Sprayed MCrAlY Coatings Focused on Nanostructure, Proceedings of Thermal Spray, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00312700

E. Irissou and B. Arsenault, Corrosion study of cold sprayed aluminum coatings onto Al 7075 alloy substrates, Proceedings of Thermal Spray 2007: Global Coating Solutions, 2007.

E. Irissou, J. G. Legoux, A. N. Ryabinin, B. Jodoin, and C. Moreau, Review on Cold Spray Process and Technology: Part I???Intellectual Property, Journal of Thermal Spray Technology, vol.17, issue.4, pp.495-516, 2008.
DOI : 10.1007/s11666-008-9203-3

E. Irissou, J. Legoux, C. Moreau, and N. Ryabinin, How Cold is Cold Spray? An Experimental Study of the Heat Transfer to the Substrate in Cold Gas Dynamic Spraying, Proceedings of Thermal Spray 2008: Thermal Spray Crossing Borders, 2008.

M. Jeandin, D. Christoulis, F. Borit, M. H. Berger, S. Guetta et al., Lasers and Thermal Spray, Materials Science Forum, vol.638, issue.642, pp.638-642171, 2010.
DOI : 10.4028/www.scientific.net/MSF.638-642.174
URL : https://hal.archives-ouvertes.fr/hal-00448274

W. Knapp, M. Jeandin, V. Behm, D. Giraud, L. L. Descurninges et al., Laser Structuring to improve cold-sprayed coating-substrate bond strength, Presented at 1st EUropean COLd Symposium (EUCOS 2011), 2011.

H. Koivuluoto, J. Lagerbom, and P. Vuoristo, Microstructural Studies of Cold Sprayed Copper, Nickel, and Nickel-30% Copper Coatings, Journal of Thermal Spray Technology, vol.200, issue.12, pp.488-497, 2007.
DOI : 10.1007/s11666-007-9060-5

H. Koivuluoto and P. Vuoristo, Structural Analysis of Cold-Sprayed Nickel-Based Metallic and Metallic-Ceramic Coatings, Journal of Thermal Spray Technology, vol.10, issue.2, pp.975-989, 2010.
DOI : 10.1007/s11666-010-9481-4

W. Kroemmer and P. Heinrich, Cold spraying-Potential and new application ideas, Proceedings of Building on 100 Years of Success: Proceedings of the 2006 International Thermal Spray Conference, 2006.

W. Li, C. Zhang, X. P. Guo, L. Dembinski, H. L. Liao et al., Study on impact fusion at particle interfaces and its effect on coating microstructure in cold spraying, Proceedings of Thermal Spray 2007: Global Coating Solutions, 2007.
DOI : 10.1016/j.apsusc.2007.06.026

W. Li, C. Zhang, H. Liao, J. Li, and C. Coddet, Characterizations of cold-sprayed Nickel???Alumina composite coating with relatively large Nickel-coated Alumina powder, Surface and Coatings Technology, vol.202, issue.19, pp.4855-4860, 2008.
DOI : 10.1016/j.surfcoat.2008.04.076

P. Li, S. Xi, and J. Zhou, Phase transformation and gas???solid reaction of Al2O3 during high-energy ball milling in N2 atmosphere, Ceramics International, vol.35, issue.1, pp.247-251, 2009.
DOI : 10.1016/j.ceramint.2007.10.030

X. Liu and C. Ding, Microstructure and Biological Properties of Plasma Sprayed Novel Bioactive Coatings, Proceedings of the Expanding Thermal Spray Performance to New Markets and Applications, United States of America, 2009.

S. P. Lu and O. Y. Kwon, Microstructure and bonding strength of WC reinforced Ni-base alloy brazed composite coating, Surface and Coatings Technology, vol.153, issue.1, pp.40-48, 2002.
DOI : 10.1016/S0257-8972(01)01555-9

H. Makinen, J. Lagerbom, and P. Vuoristo, Adhesion of cold sprayed coatings: Effect of powder, substrate and heat treatment, Proceedings of Thermal Spray 2007: Global Coating Solutions, 2007.

T. Marrocco, D. G. Mccartney, P. H. Shipway, and A. J. Sturgeon, Production of Titanium Deposits by Cold-Gas Dynamic Spray: Numerical Modeling and Experimental Characterization, Journal of Thermal Spray Technology, vol.15, issue.2, pp.263-272, 2006.
DOI : 10.1361/105996306X108219

A. Mcdonald, M. Lamontagne, C. Moreau, and S. Chandra, Impact of plasma-sprayed metal particles on hot and cold glass surfaces, Thin Solid Films, vol.514, issue.1-2, pp.212-234, 2006.
DOI : 10.1016/j.tsf.2006.03.010

C. Moreau, P. Gougeon, and M. Lamontagne, Influence of substrate preparation on the flattening and cooling of plasma-sprayed particles, Journal of Thermal Spray Technology, vol.5, issue.1, pp.25-33, 1995.
DOI : 10.1007/BF02648525

N. P. Padture, M. Gell, and E. H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, vol.296, issue.5566, pp.280-284, 2002.
DOI : 10.1126/science.1068609

A. Papyrin, V. Kosarev, S. Klinkov, A. Alkhimov, and V. Fomin, Cold Spray Technology The Netherlands The effect of roughness and preheating of the substrate on the morphology of aluminium coatings deposited by thermal spraying, Surface & Coatings Technology, vol.200, pp.3049-3055, 2006.

E. Petavratzi, S. Kingman, and I. Lowndes, Particulates from mining operations: A review of sources, effects and regulations, Minerals Engineering, vol.18, issue.12, pp.1183-1199, 2005.
DOI : 10.1016/j.mineng.2005.06.017

T. S. Price, P. H. Shipway, and D. G. Mccartney, Effect of Cold Spray Deposition of a Titanium Coating on Fatigue Behavior of a Titanium Alloy, Journal of Thermal Spray Technology, vol.15, issue.4, pp.507-512, 2006.
DOI : 10.1361/105996306X147108

P. Richer, B. Jodoin, L. Ajdelsztajn, and E. J. Lavernia, Substrate Roughness and Thickness Effects on Cold Spray Nanocrystalline Al-Mg Coatings, Journal of Thermal Spray Technology, vol.15, issue.2, pp.246-254, 2006.
DOI : 10.1361/105996306X108174

S. I. Ch, D. I. Pantelis, S. Beauvais, and M. Jeandi, Study of Al2O3 coatings on AISI 316 stainless steel obtained by controlled atmosphere plasma spraying (CAPS), Surface & Coatings Technology, vol.202, issue.1, pp.155-161, 2007.

U. Saral and N. Toplan, thermal barrier coatings, Surface Engineering, vol.137, issue.7, pp.541-547, 2009.
DOI : 10.4028/www.scientific.net/MSF.546-549.1713

T. Schlaefer, K. Bobzin, F. Ernst, K. Richardt, C. Verpoort et al., Plasma transferred wire arc spraying of novel wire feedstock onto cylinder bore walls of AlSi engine blocks, Proceedings of Thermal Spray, pp.978-981, 2008.

T. Schmidt, H. Assadi, F. Gartner, H. Richter, T. Stoltenhoff et al., From Particle Acceleration to Impact and Bonding in Cold Spraying, Journal of Thermal Spray Technology, vol.391, issue.12, pp.5-6, 2009.
DOI : 10.1007/s11666-009-9357-7

S. Shin, Y. Xiong, Y. Ji, H. J. Kim, and C. Lee, The influence of process parameters on deposition characteristics of a soft/hard composite coating in kinetic spray process, Applied Surface Science, vol.254, issue.8, pp.2269-2275, 2008.
DOI : 10.1016/j.apsusc.2007.09.017

T. Stoltenhoff, C. Borchers, F. Gartner, and H. Kreye, Microstructures and key properties of cold-sprayed and thermally sprayed copper coatings, Surface and Coatings Technology, vol.200, issue.16-17, pp.16-17, 2006.
DOI : 10.1016/j.surfcoat.2005.05.011

K. Spencer and M. Zhang, Heat treatment of cold spray coatings to form protective intermetallic layers, Scripta Materialia, vol.61, issue.1, pp.44-47, 2009.
DOI : 10.1016/j.scriptamat.2009.03.002

G. Sundararajan, N. M. Chavan, G. Sivakumar, S. Phani, and P. , Evaluation of Parameters for Assessment of Inter-Splat Bond Strength in Cold-Sprayed Coatings, Journal of Thermal Spray Technology, vol.297, issue.3, pp.1255-1266, 2010.
DOI : 10.1007/s11666-010-9527-7

T. A. Taylor, Surface roughening of metallic substrates by high pressure pure waterjet, Surface and Coatings Technology, vol.76, issue.77, pp.76-77, 1995.
DOI : 10.1016/0257-8972(95)02528-6

L. Tollier, R. Fabbro, and E. Bartnicki, Study of the laser-driven spallation process by the velocity interferometer system for any reflector interferometry technique. I. Laser-shock characterization, Journal of Applied Physics, vol.83, issue.3, pp.1224-1230, 1998.
DOI : 10.1063/1.366819

L. Tollier, R. Fabbro, and E. Bartnicki, Study of the laser-driven spallation process by the VISAR interferometry technique. II. Experiment and simulation of the spallation process, Journal of Applied Physics, vol.83, issue.3, pp.1231-1237, 1998.
DOI : 10.1063/1.366820

T. H. Van-steenkiste, J. R. Smith, and R. E. Teets, Aluminum coatings via kinetic spray with relatively large powder particles, Surface and Coatings Technology, vol.154, issue.2-3, pp.237-252, 2002.
DOI : 10.1016/S0257-8972(02)00018-X

W. Wong, E. Irissou, A. N. Ryabinin, J. Legoux, and S. Yue, Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings, Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings, pp.213-226, 2011.
DOI : 10.1007/s11666-010-9568-y

Y. Xiong, K. Kang, G. Bae, S. Yoon, and C. Lee, Dynamic amorphization and recrystallization of metals in kinetic spray process, Applied Physics Letters, vol.92, issue.19, pp.19401-19404, 2008.
DOI : 10.1063/1.2928218

D. Zhang, P. H. Shipway, and D. G. Mccartney, Particle-substrate interactions in cold gas dynamic spraying Proceedings of Thermal Spray 2003: Advancing the Science & Applying the Technology, 2003.

J. Zhang, N. Xu, W. L. Hou, J. Q. Wang, M. X. Quan et al., Fabrication and Property of MCrAlY, Proceedings of the Expanding Thermal Spray Performance to New Markets and Applications, 2009.

M. Zecchino, Why Average Roughness is Not Enough, Advance Materials & Processes, vol.161, issue.3, pp.25-28, 2003.

R. Zieris, S. Nowotny, L. Berger, L. Haubold, and E. Beyer, Characterization of Coatings Deposited by Laser-Assisted Atmospheric Plasma Spraying, Proceedings of Thermal Spray 2003: Advancing the Science & Applying the Technology, 2003.

R. Zieris, G. Langner, L. Berger, S. Nowotny, and E. Beyer, Investigation of AlSi coatings prepared by laser-assisted atmospheric plasma spraying of internal surfaces of tubes, Proceedings of Thermal Spray 2004: Advances in Technology and Application, 2004.