D. Abson and R. Pargeter, Factors influencing as-deposited strength, microstructure, and toughness of manual metal arc welds suitable for C-Mn steel fabrications, Int. Met. Reviews, vol.31, pp.141-196, 1986.

N. Aravas and R. Mcmeeking, Finite element analysis of void growth near a blunting crack tip, Journal of the Mechanics and Physics of Solids, vol.33, issue.1, pp.25-49, 1985.
DOI : 10.1016/0022-5096(85)90020-1

P. Bowen, S. Druce, and J. Knott, Effects of microstructure on cleavage fracture in pressure vessel steel, Acta Metallurgica, vol.34, issue.6, 1986.
DOI : 10.1016/0001-6160(86)90222-1

Y. Chao, Failure mode of spot welds: interfacial versus pullout, Sci. and Technol. of Welding and Joining, vol.8, pp.133-137, 2003.

S. Dancette, V. Massardier, M. J. Fabrègue, D. Dupuy, and T. , Investigations on the Mechanical Behavior of Advanced High Strength Steels Resistance Spot Welds in Cross Tension and Tensile Shear, Advanced Materials Research, vol.89, issue.91, pp.130-135, 2010.
DOI : 10.4028/www.scientific.net/AMR.89-91.130

S. Dancette, D. Fabrègue, V. Massardier, M. J. Dupuy, T. Bouzekri et al., Experimental and modeling investigation of the failure resistance of Advanced High Strength Steels spot welds, Engineering Fracture Mechanics, vol.78, issue.10, pp.2259-2272, 2011.
DOI : 10.1016/j.engfracmech.2011.04.013

S. Dancette, D. Fabrègue, R. Estevez, V. Massardier, T. Dupuy et al., A finite element model for the prediction of Advanced High Strength Steel spot welds fracture, Engineering Fracture Mechanics, vol.87, pp.48-61, 2012.
DOI : 10.1016/j.engfracmech.2012.03.004
URL : https://hal.archives-ouvertes.fr/hal-00747455

D. Gieske and O. Hahn, Neue Einelementprobe zum Prüfen von Punktschweißverbindungen unter kombinierten Belastungen (Novel specimen for spot weld test under mixed loading mode), Schweißen und Schneiden, vol.46, pp.9-12, 1994.

R. Ibrahim and H. Stark, Validity requirements for fracture toughness measurements obtained from small circumferentially notched cylindrical specimens, Engineering Fracture Mechanics, vol.28, issue.4, pp.455-460, 1987.
DOI : 10.1016/0013-7944(87)90190-1

F. Krajcarz, A. Gourgues, V. Bochard, E. Lucas, and M. Bobadilla, Development and solidification of the molten zone of resistance spot welds: influence of welding parameters, Matériaux 2010, French Federation for Materials, paper 1211, 2010.

F. Krajcarz, A. Gourgues-lorenzon, E. Lucas, M. Mazière, and A. Pineau, Local approach applied to the fracture toughness of resistance spot welds, To be published in: 13th International Conference on Fracture, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00853411

R. Lacroix, J. Monatte, A. Lens, G. Kermouche, J. Bergheau et al., Spot Weld Strength Determination Using the Wedge Test: <i>In Situ</i> Observations and Coupled Simulations, Applied Mechanics and Materials, vol.24, issue.25, pp.24-25299, 2010.
DOI : 10.4028/www.scientific.net/AMM.24-25.299

N. Levy, P. Marcal, W. Ostergren, and J. Rice, Small scale yielding near a crack in plane strain: A finite element analysis, International Journal of Fracture Mechanics, vol.7, issue.2, pp.143-156, 1971.
DOI : 10.1007/BF00183802

P. Lin and J. Pan, Closed-form structural stress and stress intensity factor solutions for spot welds in commonly used specimens, Engineering Fracture Mechanics, vol.75, issue.18, pp.5187-5206, 2008.
DOI : 10.1016/j.engfracmech.2008.08.005

P. Lin and J. Pan, Closed-form structural stress and stress intensity factor solutions for spot welds under various types of loading conditions, International Journal of Solids and Structures, vol.45, issue.14-15, pp.3996-4020, 2008.
DOI : 10.1016/j.ijsolstr.2008.02.006

P. Lin and D. Wang, Geometric functions of stress intensity factor solutions for spot welds in U-shape specimens, International Journal of Solids and Structures, vol.47, issue.5, pp.691-704, 2010.
DOI : 10.1016/j.ijsolstr.2009.11.007

T. Maccagno and J. Knott, The low temperature brittle fracture behaviour of steel in mixed modes I and II, Engineering Fracture Mechanics, vol.38, issue.2-3, pp.111-128, 1991.
DOI : 10.1016/0013-7944(91)90076-D

R. Mcmeeking, Finite deformation analysis of crack-tip opening in elastic-plastic materials and implications for fracture, Journal of the Mechanics and Physics of Solids, vol.25, issue.5, pp.357-381, 1977.
DOI : 10.1016/0022-5096(77)90003-5

N. Oultit, B. Lens, A. Klöcker, and H. , Mechanical behavior of advanced high-strength steel resistance spot welds, Sheet Metal Welding Conference XIII, 2008.

T. Pardoen, M. Scibetta, R. Chaouadi, and F. Delannay, Analysis of the geometry dependence of fracture toughness at cracking initiation by comparison of circumferentially cracked round bars and SENB tests on copper, International Journal of Fracture, vol.103, issue.3, pp.205-225, 2000.
DOI : 10.1023/A:1007668030117

T. Pardoen and J. Hutchinson, Micromechanics-based model for trends in toughness of ductile metals, Acta Materialia, vol.51, issue.1, 2003.
DOI : 10.1016/S1359-6454(02)00386-5

L. Pook, Fracture mechanics analysis of the fatigue behaviour of spot welds, International Journal of Fracture, vol.90, issue.1, pp.173-176, 1975.
DOI : 10.1007/BF00034726

D. Radaj, Stress singularity, notch stress and structural stress at spot-welded joints, Engineering Fracture Mechanics, vol.34, issue.2, pp.495-506, 1989.
DOI : 10.1016/0013-7944(89)90161-6

D. Radaj, Z. Zhaoyun, and W. Mohrmann, Local stress parameters at the weld spot of various specimens, Engineering Fracture Mechanics, vol.37, issue.5, pp.933-951, 1990.
DOI : 10.1016/0013-7944(90)90019-D

D. Radaj and S. Zhang, Stress intensity factors for spot welds between plates of unequal thickness, Engineering Fracture Mechanics, vol.39, issue.2, pp.391-413, 1991.
DOI : 10.1016/0013-7944(91)90053-4

D. Radaj and S. Zhang, Simplified formulae for stress intensity factors of spot welds, Engineering Fracture Mechanics, vol.40, issue.1, pp.233-236, 1991.
DOI : 10.1016/0013-7944(91)90142-N

J. Rice and M. Johnson, The role of large crack tip geometry changes in plane-strain fracture, Inelastic Behavior of Solids, pp.641-672, 1970.

K. Sripichai and J. Pan, Closed-form structural stress and stress intensity factor solutions for spot welds in square plates under opening loading conditions, Engineering Fracture Mechanics, vol.93, pp.168-188, 2012.
DOI : 10.1016/j.engfracmech.2012.06.016

V. Tvergaard and J. Hutchinson, The relation between crack growth resistance and fracture process parameters in elastic-plastic solids, Journal of the Mechanics and Physics of Solids, vol.40, issue.6, pp.1377-1397, 1992.
DOI : 10.1016/0022-5096(92)90020-3

V. Tvergaard and J. Hutchinson, Two mechanisms of ductile fracture: void by void growth versus multiple void interaction, International Journal of Solids and Structures, vol.39, issue.13-14, pp.3581-3597, 2002.
DOI : 10.1016/S0020-7683(02)00168-3

J. Tweed and J. Knott, Micromechanisms of failure in C???Mn weld metals, Acta Metallurgica, vol.35, issue.7, pp.1401-1414, 1987.
DOI : 10.1016/0001-6160(87)90087-3

D. Wang and S. Lin, Stress intensity factors for spot welds and associated kinked cracks in cup specimens, International Journal of Fatigue, vol.27, issue.5, pp.581-598, 2005.
DOI : 10.1016/j.ijfatigue.2004.08.008

P. Wung and W. Stewart, Method of analyzing spot welded structures, US Patent No, vol.6186, p.11, 2001.

R. Yuuki, T. Ohira, H. Nakatsukasa, and W. Li, Fracture mechanics analysis and evaluation of the fatigue strength of spot welded joints., Transactions of the Japan Society of Mechanical Engineers Series A, vol.51, issue.467, pp.1772-1779, 1985.
DOI : 10.1299/kikaia.51.1772

H. Zhang and J. Senkara, Resistance welding: fundamentals and applications, 2nd revised edition, pp.143-144, 2011.

S. Zhang, Stress intensities at spot welds, International Journal of Fracture, vol.88, issue.2, pp.167-185, 1997.
DOI : 10.1023/A:1007461430066

S. Zhang, Approximate stress formulas for a multiaxial spot weld specimen, Welding J, vol.80, pp.201-203, 2001.

X. Zhang and J. Knott, The statistical modelling of brittle fracture in homogeneous and heterogeneous steel microstructures, Acta Materialia, vol.48, issue.9, pp.2135-2146, 2000.
DOI : 10.1016/S1359-6454(00)00055-0