J. F. Agassant, R. Bouamra, C. Peiti, and J. M. Haudin, Cast film extrusion, geometrical defects and stability, Proceedings of the Polymer Processing Society Meeting, 2006.

J. M. Andre, J. F. Agassant, Y. Demay, J. M. Haudin, and B. Monasse, Numerical modelling of the polymer film blowing process, Int. J. of Forming Processes, vol.1, pp.197-210, 1998.

N. R. Anturkar and A. Co, Draw resonance in film casting of viscoelastic fluids: A linear stability analysis, Journal of Non-Newtonian Fluid Mechanics, vol.28, issue.3, pp.287-307, 1988.
DOI : 10.1016/0377-0257(88)87002-2

P. Barq, J. M. Haudin, J. F. Agassant, H. Roth, and P. Bourgin, Instability Phenomena in Film Casting Process, International Polymer Processing, vol.5, issue.4, pp.264-271, 1990.
DOI : 10.3139/217.900264

P. Barq, J. M. Haudin, J. F. Agassant, and P. Bourgin, Stationary and Dynamic Analysis of Film Casting Process, International Polymer Processing, vol.9, issue.4, pp.350-358, 1994.
DOI : 10.3139/217.940350

L. L. Blyler and C. Gieniewski, Melt spinning and draw resonance studies on a poly (?-methyl styrene/silicone) block copolymer, Polymer Engineering and Science, vol.24, issue.2, pp.140-148, 1980.
DOI : 10.1002/pen.760200205

S. Bourrigaud, G. Marin, V. Dabas, C. Dupuy, and D. Silagy, The draw ratio???Deborah number diagram: A useful tool for coating applications, Polymer Engineering & Science, vol.1, issue.3, pp.372-380, 2006.
DOI : 10.1002/pen.20476

J. J. Cain and M. M. Denn, Multiplicities and instabilities in film blowing, Polymer Engineering and Science, vol.21, issue.23, pp.1527-1541, 1988.
DOI : 10.1002/pen.760282303

F. Chambon, D. Silagy, Y. Demay, J. F. Agassant, and S. Ohlsson, A method to reduce draw resonance, 1998.

J. C. Chang and M. M. Denn, An experimental study of isotermal spinning of a newtonian and viscoelastic liquid, Journal of Non-Newtonian Fluid Mechanics, vol.5, pp.369-385, 1979.
DOI : 10.1016/0377-0257(79)85024-7

A. Co, Draw resonnance in film casting, Chap.10 in Polymer Processing Instabilities: Control and Understanding, 2005.

Y. Demay, Instabilité d'étirage et bifurcation de Hopf, Thèse de Doctorat d'Etat, 1983.

Y. Demay and J. F. Agassant, Application de la stabilité linéaire à l'étude du filage textile isotherme et non-isotherme, J. Meca. Theo. Appl, vol.1, pp.763-782, 1982.

Y. Demay and J. F. Agassant, Experimental study of the draw resonance in fiber spinning, Journal of Non-Newtonian Fluid Mechanics, vol.18, issue.2, pp.187-198, 1985.
DOI : 10.1016/0377-0257(85)85021-7

M. M. Denn, C. J. Petrie, and P. Avenas, Mechanics of steady spinning of a viscoelastic liquid, AIChE Journal, vol.21, issue.4, pp.791-799, 1975.
DOI : 10.1002/aic.690210423

A. K. Doufas and A. J. Mchugh, Simulation of film blowing including flow-induced crystallization, Journal of Rheology, vol.45, issue.5, pp.1085-1104, 2001.
DOI : 10.1122/1.1392300

R. J. Fischer and M. M. Denn, Finite-amplitude stability and draw resonance in isothermal melt spinning, Chemical Engineering Science, vol.30, issue.9, pp.1129-1134, 1975.
DOI : 10.1016/0009-2509(75)87015-1

R. J. Fischer and M. M. Denn, A theory of isothermal melt spinning and draw resonance, AIChE Journal, vol.22, issue.2, pp.236-246, 1976.
DOI : 10.1002/aic.690220203

A. Fortin, P. Carrier, and Y. Demay, Numerical simulation of coextrusion and film casting, International Journal for Numerical Methods in Fluids, vol.141, issue.1, pp.31-57, 1995.
DOI : 10.1002/fld.1650200103

A. Ghaneh-fard, P. J. Carreau, and P. G. Lafleur, Study of instabilities in film blowing, AIChE Journal, vol.42, issue.5, pp.1388-1396, 1996.
DOI : 10.1002/aic.690420519

A. Ghiljels and J. J. Ente, Draw resonance studies on polypropylene melts, Proceedings of the International Conference on Rheology, 1980.

R. K. Gupta and P. D. Drechsel, Draw resonance in the non-isothermal spinning of polypropylene, nd World Congress of Chemical Engineering, 1981.

C. D. Han and J. M. Park, Studies on blown film extrusion. I. Experimental determination of elongational viscosity, Journal of Applied Polymer Science, vol.19, issue.12, pp.3257-3276, 1975.
DOI : 10.1002/app.1975.070191212

L. K. Henrichsen and A. J. Mchugh, Analysis of Film Blowing with Flow-enhanced Crystallization, International Polymer Processing, vol.22, issue.2, pp.190-197, 2007.
DOI : 10.3139/217.1004

K. Housiadas and J. Tsamopoulos, Unsteady flow of an axisymmetric annular film under gravity, Physics of Fluids, vol.10, issue.10, pp.2500-2516, 1998.
DOI : 10.1063/1.869766

J. C. Hyun, Draw resonance in polymer processing: a short chronology and a new approach, Korea-Australia Rheology Journal, vol.11, pp.279-285, 1999.

J. C. Hyun, H. Kim, J. S. Lee, H. S. Song, and H. W. Jung, Transient solutions of the dynamics in film blowing processes, Journal of Non-Newtonian Fluid Mechanics, vol.121, issue.2-3, pp.157-162, 2004.
DOI : 10.1016/j.jnnfm.2004.06.004

H. Ishihara and S. Kase, Studies on melt spinning. V. Draw resonance as a limit cycle, Journal of Applied Polymer Science, vol.19, issue.2, pp.557-566, 1975.
DOI : 10.1002/app.1975.070190218

H. Ishihara and S. Kase, Studies on melt spinning. VI. Simulation of draw resonance using Newtonian and power law viscosities, Journal of Applied Polymer Science, vol.20, issue.1, pp.169-191, 1976.
DOI : 10.1002/app.1976.070200116

L. Jarecki and A. Ziabicki, Viscosity effects in computer modeling of fiber spinning from crystallizing polymer melts, Polimery, vol.49, pp.101-109, 2004.

H. W. Jung, H. S. Song, and J. C. Hyun, Analysis of the stabilizing effect of spinline cooling in melt spinning, Journal of Non-Newtonian Fluid Mechanics, vol.87, issue.2-3, pp.165-174, 1999.
DOI : 10.1016/S0377-0257(99)00061-0

H. W. Jung and J. C. Hyun, Fiber Spinning and Film Blowing Instabilities, 11 in Polymer Processing Instabilities: Control and Understanding, 2005.
DOI : 10.1201/9781420030686-7

H. W. Jung and J. C. Hyun, Instabilities in extensional deformation polymer processing, Rheology Review, pp.131-164, 2006.

T. Kanai and J. L. White, Kinematics, dynamics and stability of the tubular film extrusion of various polyethylenes, Polymer Engineering and Science, vol.22, issue.15, pp.1185-1201, 1984.
DOI : 10.1002/pen.760241508

T. Kanai and J. L. White, Abstract, Journal of Polymer Engineering, vol.5, issue.2, pp.135-157, 1985.
DOI : 10.1515/polyeng-1985-0204

S. Kase and T. Matsuo, Studies on melt spinning. I. Fundamental equations on the dynamics of melt spinning, Journal of Polymer Science Part A: General Papers, vol.3, issue.7, pp.2541-2554, 1965.
DOI : 10.1002/pol.1965.100030712

S. Kase, Studies on melt spinning. IV. On the stability of melt spinning, Journal of Applied Polymer Science, vol.18, issue.11, pp.3278-3304, 1974.
DOI : 10.1002/app.1974.070181109

J. M. Kim, J. S. Lee, H. W. Jung, and J. C. Hyun, Transient solutions of the dynamics of film casting process using a 2-D viscoelastic model, Journal of Non-Newtonian Fluid Mechanics, vol.132, issue.1-3, pp.53-60, 2005.
DOI : 10.1016/j.jnnfm.2005.10.002

W. H. Kohler and A. J. Mchugh, Sensitivity analysis of low-speed melt spinning of isotactic polypropylene, Chemical Engineering Science, vol.62, issue.10, pp.2690-2697, 2007.
DOI : 10.1016/j.ces.2007.02.015

W. H. Kohler and A. J. Mchugh, Prediction of the influence of flow-enhanced crystallization on the dynamics of fiber spinning, Polymer Engineering & Science, vol.14, issue.1, pp.88-96, 2008.
DOI : 10.1002/pen.20888

J. Laffargue, L. Parent, P. G. Lafleur, P. J. Carreau, Y. Demay et al., Investigation of Bubble Instabilities in Film Blowing Process, International Polymer Processing, vol.17, issue.4, pp.347-353, 2002.
DOI : 10.3139/217.1704
URL : https://hal.archives-ouvertes.fr/hal-00533198

J. Laffargue, Etude et modelisation du procédé de soufflage de gaine, Thèse de doctorat, Mines-ParisTech, 2003.

J. Laffargue, Y. Demay, and J. F. Agassant, Investigation of Polymer Stretching Instabilities: Application to Film Blowing, International Polymer Processing, vol.25, issue.5, pp.356-371, 2010.
DOI : 10.3139/217.2347
URL : https://hal.archives-ouvertes.fr/hal-00524592

J. S. Lee, H. W. Jung, S. H. Kim, and J. C. Hyun, Effect of fluid viscoelasticity on the draw resonance dynamics of melt spinning, Journal of Non-Newtonian Fluid Mechanics, vol.99, issue.2-3, pp.159-166, 2001.
DOI : 10.1016/S0377-0257(01)00111-2

J. S. Lee, D. M. Shin, H. W. Jung, and J. C. Hyun, Transient solutions of the dynamics in low-speed fiber spinning process accompanied by flow-induced crystallization, Journal of Non-Newtonian Fluid Mechanics, vol.130, issue.2-3, pp.110-116, 2005.
DOI : 10.1016/j.jnnfm.2005.08.004

J. S. Lee, H. W. Jung, and J. C. Hyun, Transient solutions of nonlinear dynamics in film blowing process accompanied by on-line crystallization, Journal of Rheology, vol.55, issue.2, pp.257-271, 2011.
DOI : 10.1122/1.3532091

J. S. Lee, H. W. Jung, and J. C. Hyun, Non-linear dynamic behaviour of non-isothermal film blowing process under the condition of constant bubble pressure, AICHE J, vol.57, pp.3565-3570, 2011.

W. Minoshima and J. L. White, Instability phenomena in tubular film, and melt spinning of rheologically characterized high density, low density and linear low density polyethylenes, Journal of Non-Newtonian Fluid Mechanics, vol.19, issue.3, pp.275-302, 1986.
DOI : 10.1016/0377-0257(86)80053-2

J. R. Pearson and M. A. Matovich, Spinning a Molten Threadline. Stability, Industrial & Engineering Chemistry Fundamentals, vol.8, issue.4, pp.605-609, 1969.
DOI : 10.1021/i160032a001

J. R. Pearson and C. J. Petrie, The flow of a tubular film. Part 1. Formal mathematical representation, Journal of Fluid Mechanics, vol.1, issue.01, pp.1-19, 1970.
DOI : 10.1017/S0022112070000010

J. C. Pirkle and R. D. Braatz, Instabilities and multiplicities in non-isothermal blown film extrusion including the effects of crystallization, Journal of Process Control, vol.21, issue.3, pp.405-414, 2003.
DOI : 10.1016/j.jprocont.2010.12.007

J. C. Pirkle and R. D. Braatz, A thin-shell two-phase microstructural model for blown film extrusion, Journal of Rheology, vol.54, issue.3, pp.471-505, 2010.
DOI : 10.1122/1.3366603

Y. T. Shah and J. R. Pearson, On the stability of non-isothermal fiber spinning, Ind. Eng. Chem. Fund, vol.46, pp.145-149, 1972.

D. M. Shin, J. S. Lee, H. W. Jung, and J. C. Hyun, High-speed fiber spinning process with spinline flow-induced crystallization and neck-like deformation, Rheologica Acta, vol.30, issue.5, pp.575-582, 2006.
DOI : 10.1007/s00397-006-0100-8

D. M. Shin, J. S. Lee, H. W. Jung, and J. C. Hyun, Transient and steady-state solutions of 2D viscoelastic nonisothermal simulation model of film casting process via finite element method, Journal of Rheology, vol.51, issue.3, pp.393-407, 2007.
DOI : 10.1122/1.2714781

D. M. Shin, J. S. Lee, H. W. Jung, and J. C. Hyun, Multiplicity, bifurcation, stability and hysteresis in dynamic solutions of film blowing process, Journal of Rheology, vol.51, issue.4, pp.605-621, 2007.
DOI : 10.1122/1.2736405

D. Silagy, Modélisation du procédé d'extrusion de film à plat de polymère, Thèse de Doctorat, 1996.

D. Silagy, Y. Demay, and J. F. Agassant, Study of the stability of the film casting process, Polymer Engineering & Science, vol.21, issue.21, pp.2614-3625, 1996.
DOI : 10.1002/pen.10661

D. Silagy, Y. Demay, and J. F. Agassant, Stationary and stability analysis of the film casting process, Journal of Non-Newtonian Fluid Mechanics, vol.79, issue.2-3, pp.563-583, 1998.
DOI : 10.1016/S0377-0257(98)00119-0
URL : https://hal.archives-ouvertes.fr/hal-00613102

M. Souli, Y. Demay, and A. Habbal, Finite element study of the draw resonance instability, Eur. J. Mech., B/Fluids, vol.12, pp.1-13, 1993.

J. L. White and H. Yamane, A collaborative study of the rheological properties and unstable melt spinning characteristics of linear and branched polyethylene terephthalates, Pure and Applied Chemistry, vol.57, issue.10, pp.1441-1452, 1985.
DOI : 10.1351/pac198557101441

Y. L. Yeow, Stability of tubular film flow: a model of the film-blowing process, Journal of Fluid Mechanics, vol.40, issue.03, pp.577-591, 1976.
DOI : 10.1017/S0022112076000396

K. S. Yoon and C. W. Park, Stability of a Blown Film Extrusion Process, International Polymer Processing, vol.14, issue.4, pp.342-349, 1999.
DOI : 10.3139/217.1565