P. Bossis, D. Pecheur, K. Hanifi, J. Thomazet, and M. Blat, Comparison of the high burn-up corrosion on M5 R and low tin Zircaloy-4, 14th International Symposium on Zirconium in the Nuclear Industry ASTM STP 1467, pp.494-525, 2005.

A. Glendening, Influence of hydride blisters on the failure of Zircaloy-4 under equal biaxial tension, 2004.

A. White, A. Sawatzky, and C. Woo, A computer model for hydride-blister growth in zirconium alloys, Atomic Energy of Canada Limited, 1985.

G. Field, J. Dunn, and B. Cheadle, Analysis of the Pressure Tube Failure at Pickering NGS ???A??? Unit 2 Nuclear Systems Department, Canadian Metallurgical Quarterly, vol.24, issue.3, pp.181-188, 1985.
DOI : 10.1179/cmq.1985.24.3.181

M. Puls, Determination of fracture initiation in hydride blisters using acoustic emission, Metallurgical Transactions A 19A, pp.2247-2257, 1988.

G. Domizzi, R. Enrique, J. Ovejero-garcia, and G. Buscaglia, Blister growth in zirconium alloys: experimentation and modeling, Journal of Nuclear Materials, vol.229, pp.36-47, 1996.
DOI : 10.1016/0022-3115(95)00204-9

G. Domizzi, G. Vigna, S. Bermdez, and J. Ovejero-garcia, Hydride distribution around a blister in Zr???2.5Nb pressure tubes, Journal of Nuclear Materials, vol.275, issue.3, pp.255-267, 1999.
DOI : 10.1016/S0022-3115(99)00130-0

M. Leger, G. Moan, A. Wallace, and N. Watson, Growth, fracture and non destructive evaluation of hydride blisters in Zr-2.5Nb pressure tubes, 8th International Symposium on Zirconium in the Nuclear Industry, ASTM STP 1023, pp.50-65, 1988.

Y. Cheong, U. Gong, K. Choo, S. Kim, and Y. Kim, Formation and Growth of hydride blisters in Zr-2.5Nb Pressure tubes, Journal of the Korean Nuclear Society, vol.33, issue.2, pp.192-200, 2001.

R. Singh, R. Kishore, T. Sinha, and B. Kashyap, Hydride blister formation in Zr???2.5wt%Nb pressure tube alloy, Journal of Nuclear Materials, vol.301, issue.2-3, pp.153-164, 2002.
DOI : 10.1016/S0022-3115(02)00708-0

M. Balourdet, C. Bernaudat, V. Basini, and N. Hourdequin, The PROME- TRA programme: Assessment of mechanical properties of Zircaloy-4 fuel cladding during an RIA, 15th International Conference on Structural Mechanics in Reactor Technology, pp.485-492, 1999.

T. Fuketa, H. Sasajima, Y. Mori, and K. Ishijima, Fuel failure and fission gas release in high burnup PWR fuels under RIA conditions, Journal of Nuclear Materials, vol.248, pp.249-256, 1997.
DOI : 10.1016/S0022-3115(97)00173-6

A. Garde, G. Smith, and . Pirek, Effects of Hydride Precipitate Localization and Neutron Fluence on the Ductility of Irradiated Zircaloy-4, 11th International Symposium on Zirconium in the Nuclear Industry, ASTM STP 1295, pp.407-430, 1996.
DOI : 10.1520/STP16183S

M. Blat-yrieix, A. Ambard, C. Watroba, A. Miquet, and A. Legris, Poster: How to obtain in laboratory representative hydride blisters on zirconium alloys: A survey of surface effect, 16th International Symposium on Zirconium in the Nuclear Industry, ASTM STP 1529, 2010.

P. Guedeney and M. Trotabas, Caracterisation du comportement du combustible Fragema fort taux de combustion, in: International Topical Meeting on Light Water Reactor Fuel Performance, 1991.

R. O. Meyer, R. K. Mccardell, H. M. Chung, D. J. Diamond, and H. H. Scott, A regulatory assessment of test data for reactivity initiated accidents, Nuclear Safety, vol.37, issue.4, pp.872-387, 1996.

J. Papin, B. Cazalis, J. Frizonnet, E. Federici, and F. Lemoine, Synthesis of CABRI-RIA tests interpretation, 2003.

J. Desquines, B. Cazalis, C. Bernaudat, C. Poussard, X. Averty et al., Mechanical properties of Zircaloy-4 PWR fuel cladding with burnup 54-64MWd/kgU and implications for RIA behavior, 14th International Symposium on Zirconium in the Nuclear Industry ASTM STP 1467, pp.851-872, 2005.

A. Hermann, S. Yagnik, and D. Gavillet, Effect of local hydride accumulations on Zircaloy cladding mechanical properties, 15th International Symposium on Zirconium in the Nuclear Industry, ASTM STP 1505, pp.141-162, 2007.

D. Bates, Influence of stress state and hydrogen on deformation and failure of Zircaloy-4, Master of science, 1998.

O. Pierron, D. Koss, A. Motta, and K. Chan, The influence of hydride blisters on the fracture of Zircaloy-4, Journal of Nuclear Materials, vol.322, issue.1, pp.21-35, 2003.
DOI : 10.1016/S0022-3115(03)00299-X

P. Raynaud, D. Koss, A. Motta, and K. Chan, Fracture toughness of hydrided Zircaloy-4 sheet under through-thickness crack growth conditions, Journal of ASTM international, vol.5, issue.1, pp.1-15, 2007.

T. Fuketa, H. Sasajima, Y. Mori, K. Homma, S. Tanzawa et al., Behavior of pre-irradiated fuel under a simulated RIA condition (Results of NSRR test JM-5, Tech. Rep. JAERI research, pp.95-078, 1995.

K. Murty and I. Charit, Texture development and anisotropic deformation of zircaloys, Progress in Nuclear Energy, vol.48, issue.4, pp.325-359, 2006.
DOI : 10.1016/j.pnucene.2005.09.011

J. Dunlop, Y. Brechet, L. Legras, and H. Zurob, Modelling isothermal and non-isothermal recrystallisation kinetics: Application to Zircaloy-4, Journal of Nuclear Materials, vol.366, issue.1-2, pp.178-186, 2007.
DOI : 10.1016/j.jnucmat.2006.12.074
URL : https://hal.archives-ouvertes.fr/hal-00204767

S. Allegre, L. Sachot, and O. Rabouille, Method of analysing an image of hydrides in a metal alloy, notably in a nuclear fuel cladding alloy, us patent, p.1, 2011.

C. Raepsaet, P. Bossis, D. Hamon, J. Bechade, and J. Brachet, Quantification and local distribution of hydrogen within Zircaloy-4 PWR nuclear fuel cladding tubes at the nuclear microprobe of the Pierre Sue Laboratory from l-ERDA, Nuclear Instruments and Methods in, Physics Research B, issue.266, pp.2424-2428, 2008.

M. Mayer-of, N. Rbs, and E. , SIMNRA, a simulation program for the analysis, 15th International Conference on the Application of Accelerators in Research and Industry , American Institute of Physics Conference Proceedings 475, p.541, 1998.

G. Plumereau, F. Ladieu, and P. Berger, Noise-induced local heatings in microbeam analysis, Nuclear Instruments and Methods in, Physics Research B, vol.158, pp.190-193, 1999.

A. Hammersley, Fit2d : An introduction and overview, European Synchrotron Radiation Facility, 1997.

S. Yamanaka, K. Yoshioka, M. Uno, M. Katsura, H. Anada et al., Thermal and mechanical properties of zirconium hydride, Journal of Alloys and Compounds, vol.293, issue.295, pp.293-295, 1999.
DOI : 10.1016/S0925-8388(99)00389-8

A. W. Sommer and W. Dennison, Thermal diffusion of hydrogen in nonstoichiometric zirconium-dihydride, 1960.

B. Kammenzind, D. Franklin, W. Duffin, and H. Peters, Hydrogen pickup and redistribution in alpha-annealed Zircaloy-4, 11th International Symposium on Zirconium in the Nuclear Industry, ASTM STP 1295, pp.338-370, 1996.

A. Sawatzky, Hydrogen in zircaloy-2: Its distribution and heat of transport, Journal of Nuclear Materials, vol.2, issue.4, pp.321-328, 1960.
DOI : 10.1016/0022-3115(60)90004-0

J. Markowitz, The thermal diffusion of hydrogen in alpha-delta Zircaloy-2, Transactions of the Metallurgical Society, AIME, vol.221, pp.819-823, 1961.

A. Sawatzky, The heat of transport of hydrogen in zirconium alloys, Journal of Nuclear Materials, vol.9, issue.3, p.364, 1963.
DOI : 10.1016/0022-3115(63)90154-5

S. Morozumi, K. Kitada, K. Abe, and S. Koda, Effects of alloying elements and cold work on the redistribution of hydrogen in zirconium under a temperature gradient, Journal of Nuclear Materials, vol.33, issue.3, pp.261-270, 1969.
DOI : 10.1016/0022-3115(69)90020-8

M. Sugisaki, Thermal diffusion of tritium and protium in alpha phase of zirconium, Fusion Technology, vol.14, pp.723-728, 1988.

K. Hashizume, M. Hayakawa, M. Koganemaru, and M. Sugisaki, Temperature dependence of heat of transport of hydrogen in zirconium, Defect and Diffusion Forum, pp.95-98, 1993.

H. Hong, S. Kim, and K. Lee, Thermotransport of hydrogen in Zircaloy-4 and modified Zircaloy-4, Journal of Nuclear Materials, vol.257, issue.1, pp.15-20, 1998.
DOI : 10.1016/S0022-3115(98)00430-9

S. Yamanaka, K. Yamada, K. Kurosaki, M. Uno, K. Takeda et al., Thermal properties of zirconium hydride, Journal of Nuclear Materials, vol.294, issue.1-2, pp.94-98, 2001.
DOI : 10.1016/S0022-3115(01)00457-3

J. Kearns, Dissolution kinetics of hydride platelets in zircaloy-4, Journal of Nuclear Materials, vol.27, issue.1, pp.64-72, 1968.
DOI : 10.1016/0022-3115(68)90008-1

O. Zanellato, M. Preuss, J. Buffiere, F. Ribeiro, A. Steuwer et al., Synchrotron diffraction study of dissolution and precipitation kinetics of hydrides in Zircaloy-4, Journal of Nuclear Materials, vol.420, issue.1-3, pp.537-547, 2012.
DOI : 10.1016/j.jnucmat.2011.11.009

K. Une and S. Ishimoto, Dissolution and precipitation behavior of hydrides in Zircaloy-2 and high Fe Zircaloy, Journal of Nuclear Materials, vol.322, issue.1, pp.66-72, 2003.
DOI : 10.1016/S0022-3115(03)00320-9

M. Puls, Review of the thermodynamic basis for models of delayed hydride cracking rate in zirconium alloys, Journal of Nuclear Materials, vol.393, issue.2, pp.350-367, 2009.
DOI : 10.1016/j.jnucmat.2009.06.022

G. Marino, A numerical calculation of the redistribution of an interstitial solute in a thermal gradient, Nuclear Science and Engineering, vol.49, pp.93-98, 1972.

A. Sawatzky, The diffusion and solubility of hydrogen in the alpha phase of zircaloy-2, Journal of Nuclear Materials, vol.2, issue.1, pp.62-68, 1960.
DOI : 10.1016/0022-3115(60)90025-8

J. Kearns, Terminal solubility and partitioning of hydrogen in the alpha phase of zirconium, Zircaloy-2 and Zircaloy-4, Journal of Nuclear Materials, vol.22, issue.3, pp.292-303, 1967.
DOI : 10.1016/0022-3115(67)90047-5

C. Korn and S. D. Goren, NMR study of hydrogen diffusion in zirconium hydride, Physical Review B, vol.33, issue.1, pp.68-78, 1986.
DOI : 10.1103/PhysRevB.33.68

C. Schwartz and M. Mallett, Observation of the behavior of hydrogen in zirconium, Transactions of the american society metals, pp.46-641, 1954.

M. Mallet and W. Albrecht, Low-Pressure Solubility and Diffusion of Hydrogen in Zirconium, Journal of The Electrochemical Society, vol.104, issue.3, pp.142-146, 1957.
DOI : 10.1149/1.2428522

M. Someno, Determination of the solubility and diffusion coefficient of hydrogen in zirconium, Nihon Kinzoku Gakkaishi, vol.24, pp.249-253, 1960.

C. Cupp and P. Flubacher, An autoradiographic technique for the study of tritium in metals and its application to diffusion in zirconium at 149?? to 240?? C, Journal of Nuclear Materials, vol.6, issue.2, pp.213-228, 1962.
DOI : 10.1016/0022-3115(62)90272-6

J. Kearns, Diffusion coefficient of hydrogen in alpha zirconium, Zircaloy-2 and Zircaloy-4, Journal of Nuclear Materials, vol.43, issue.3, pp.330-338, 1972.
DOI : 10.1016/0022-3115(72)90065-7

J. Austin, T. Elleman, and K. Verghese, Tritium diffusion in zircaloy-2 in the temperature range ???78 to 204?? C, Journal of Nuclear Materials, vol.51, issue.3, pp.321-329, 1974.
DOI : 10.1016/0022-3115(74)90197-4

G. Greger, H. Munzel, W. Kunz, and A. Schwierczinski, Diffusion of tritium in zircaloy-2, Journal of Nuclear Materials, vol.88, issue.1, pp.15-22, 1980.
DOI : 10.1016/0022-3115(80)90381-5

K. Hashizume, M. Sugisaki, K. Hatano, T. Ohmori, and K. Ogi, Application of Discharge Implantation Method to Measurement of Diffusion Coefficient of Hydrogen Isotopes in Zirconium, Journal of Nuclear Science and Technology, vol.49, issue.12, pp.1294-1300, 1994.
DOI : 10.1080/18811248.1994.9735292

C. Zhang, B. Li, and P. Norton, The study of hydrogen segregation on Zr(0001) and Zr(1010) surfaces by static secondary ion mass spectroscopy, work function, Auger electron spectroscopy and nuclear reaction analysis, Journal of Alloys and Compounds, vol.231, issue.1-2, pp.354-363, 1995.
DOI : 10.1016/0925-8388(95)01847-6

D. Khatamian, Diffusion of deuterium in Zr???2.5Nb alloy under neutron irradiation, Journal of Alloys and Compounds, vol.509, pp.797-800, 2011.
DOI : 10.1016/j.jallcom.2010.08.052

N. Dupin, I. Ansara, C. Servant, C. Toffolon, C. Lemaignan et al., A thermodynamic database for zirconium alloys, Journal of Nuclear Materials, vol.275, issue.3, pp.287-295, 1999.
DOI : 10.1016/S0022-3115(99)00125-7

A. Hellouin-de-menibus, T. Guilbert, Q. Auzoux, C. Toffolon, J. Bechade et al., Hydrogen contribution to the thermal expansion of hydrided Zircaloy-4 cladding tubes, Journal of Nuclear Materials, vol.440, issue.1-3, pp.169-177, 2013.
DOI : 10.1016/j.jnucmat.2013.04.039
URL : https://hal.archives-ouvertes.fr/hal-00830844

I. Ferguson, Computed X-Ray powder diffraction patterns and densities for corundum, aluminium, zirconium, delta-UZr2, and the zirconium hydrides, 1976.

M. Puls, S. Shi, and J. Rabier, Experimental studies of mechanical properties of solid zirconium hydrides, Journal of Nuclear Materials, vol.336, issue.1, pp.73-80, 2005.
DOI : 10.1016/j.jnucmat.2004.08.016

R. Beck, Thermophysical properties of zirconium hydrides, American Society of Metals Transactions Quarterly, vol.55, pp.556-567, 1962.

K. Barraclough and C. Beevers, Some observations on the phase transformations in zirconium hydrides, Journal of Nuclear Materials, vol.34, issue.2, pp.125-134, 1970.
DOI : 10.1016/0022-3115(70)90112-1

V. Syasin, E. Boyko, and V. Markin, Investigations of Hardness, Internal Friction and Brittleness of Zirconium Hydride*, Zeitschrift f??r Physikalische Chemie, vol.164, issue.Part_2, pp.1567-1572, 1989.
DOI : 10.1524/zpch.1989.164.Part_2.1567

M. Kuroda, D. Setoyama, M. Uno, and S. Yamanaka, Nanoindentation studies of zirconium hydride, Journal of Alloys and Compounds, vol.368, issue.1-2, pp.211-214, 2004.
DOI : 10.1016/j.jallcom.2003.08.094

Y. Kitano, K. Kurosaki, M. Ito, H. Muta, M. Uno et al., Fabrication and mechanical characterization of zirconium and gadolinium hydrides, Journal of Nuclear Materials, vol.389, issue.1, pp.170-172, 2009.
DOI : 10.1016/j.jnucmat.2009.01.024

J. Xu and S. Shi, Investigation of mechanical properties of ??-zirconium hydride using micro- and nano-indentation techniques, Journal of Nuclear Materials, vol.327, issue.2-3, pp.165-170, 2004.
DOI : 10.1016/j.jnucmat.2004.02.004

W. Zhu, R. Wang, G. Shu, P. Wu, and H. Xiao, First-Principles Study of Different Polymorphs of Crystalline Zirconium Hydride, The Journal of Physical Chemistry C, vol.114, issue.50, pp.22361-22368, 2010.
DOI : 10.1021/jp109185n

P. Zhang, B. Wang, C. He, and P. Zhang, First-principles study of ground state properties of ZrH2, Computational Materials Science, vol.50, issue.12, pp.3297-3302, 2011.
DOI : 10.1016/j.commatsci.2011.06.016

J. Blomqvist, J. Olofsson, A. Alvarez, and C. Bjerken, Structure and Thermodynamical Properties of Zirconium Hydrides from First-Principle, 15th International Conference Environmental Segradation of Materials in Nuclear Power Systems-Water Reactors, 2011.
DOI : 10.1002/9781118456835.ch70

M. Vicente-alvarez, J. Santisteban, G. Domizzi, and J. Almer, Phase and texture analysis of a hydride blister in a Zr???2.5%Nb tube by synchrotron X-ray diffraction, Acta Materialia, vol.59, issue.5, pp.2210-2220, 2011.
DOI : 10.1016/j.actamat.2010.12.024

P. Raynaud, Crack growth through the thickness of thin sheet hydrided Zircaloy-4, 2009.

G. Carpenter, The dilatational misfit of zirconium hydrides precipitated in zirconium, Journal of Nuclear Materials, vol.48, issue.3, pp.264-266, 1973.
DOI : 10.1016/0022-3115(73)90022-6

V. Perovic, G. Weatherly, S. Mac-ewen, and M. Leger, The influence of prior deformation on hydride precipitation in zircaloy, Acta Metallurgica et Materialia, vol.40, issue.2, pp.363-372, 1992.
DOI : 10.1016/0956-7151(92)90310-B

A. Wallace, Numerical analysis of zirconium hydride blisters in CANDU reactor pressure tubes, Ninth International conference on structural mechanics in reactor technology, 1987.

T. Laursen, M. Leger, M. Xin-pei, J. Macarthur, G. Palmer et al., The measurement of the deuterium concentration distributions in deuteride blisters on zirconium-alloy pressure tube material, Journal of Nuclear Materials, vol.165, issue.2, pp.156-163, 1989.
DOI : 10.1016/0022-3115(89)90244-4

D. Northwood and U. Kosasih, Hydrides and delayed hydrogen cracking in zirconium and its alloys, International Metals Reviews, vol.22, issue.1, pp.92-121, 1983.
DOI : 10.1520/STP35595S

B. F. Kammenzind, B. M. Berquist, R. Bajaj, P. H. Kreyns, and D. G. Franklin, The long range migration of hydrogen through Zircaloy in response to tensile and compressive stress gradients, 12th international Symposium on Zirconium in the Nuclear Industry, ASTM STP 1354, pp.196-233, 1998.

S. R. Macewen, C. E. Coleman, C. E. Ells, and J. Faber-jr, Dilation of hcp zirconium by interstitial deuterium, Acta Metallurgica, vol.33, issue.5, p.753757, 1985.

M. Vanderglas and Y. Kim, Stresses due to volumetric expansion of zirconium hydride inclusions, International Journal of Pressure Vessels and Piping, vol.22, issue.3, pp.177-196, 1986.
DOI : 10.1016/0308-0161(86)90116-X

J. Eshelby, The Elastic Field Outside an Ellipsoidal Inclusion, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.252, issue.1271, pp.561-569, 1271.
DOI : 10.1098/rspa.1959.0173

R. Singh, R. Kishore, T. Sinha, S. Banerjee, and B. Kashyap, Stress field estimation around a semi-constrained inclusion and its validation by interpreting hydride platelet orientation around a blister in a Zr???2.5Nb alloy, Materials Science and Engineering: A, vol.339, issue.1-2, pp.17-28, 2003.
DOI : 10.1016/S0921-5093(02)00115-6

J. Santisteban, A. Steuwer, G. Domizzi, and M. Peel, Determination of residuals stresses around blisters in Zr-2.5Nb pressure tubes, Powder Diffraction, vol.24, issue.2, pp.572-576, 2009.

M. Leger, M. Puls, T. Byrne, G. Moan, A. Causey et al., The formation and characteristics of hydride blisters in cold worked Zircaloy-2 pressure tubes, IAEA Consultants' Meeting , E.G. Price, 1994.

A. Machiels, Spent fuel transportation applications assessment of cladding performance, Electric Power Research Institute, 2007.

Z. Pan, I. Ritchie, and M. Puls, The terminal solid solubility of hydrogen and deuterium in Zr-2.5Nb alloys, Journal of Nuclear Materials, vol.228, issue.2, pp.227-237, 1996.
DOI : 10.1016/S0022-3115(95)00217-0

M. Puls, The Effect of Hydrogen and Hydrides on the Integrity of Zirconium Alloy Components, 2012.
DOI : 10.1007/978-1-4471-4195-2

R. Tang and X. Yang, Dissolution and precipitation behaviors of hydrides in N18, Zry-4 and M5 alloys, International Journal of Hydrogen Energy, vol.34, issue.17, pp.7269-7274, 2009.
DOI : 10.1016/j.ijhydene.2009.07.018

A. Mcminn, E. Darby, and J. Schofield, The Terminal Solid Solubility of Hydrogen in Zirconium Alloys, 12th International Symposium on Zirconium in the Nuclear Industry, ASTM STP 1354, pp.173-195, 2000.
DOI : 10.1520/STP14300S

P. Vizcaino, A. Banchik, and J. Abriata, Solubility of hydrogen in Zircaloy-4: irradiation induced increase and thermal recovery, Journal of Nuclear Materials, vol.304, issue.2-3, pp.96-106, 2002.
DOI : 10.1016/S0022-3115(02)00883-8

P. Vizcaino, A. Banchik, and J. Abriata, Hydride phase dissolution enthalpy in neutron irradiated Zircaloy-4, Journal of Nuclear Materials, vol.336, issue.1, pp.54-64, 2005.
DOI : 10.1016/j.jnucmat.2004.08.013

A. Sasahara and T. Matsumura, Post-irradiation examinations focused on fuel integrity of spent BWR-MOX and PWR-UO2 fuels stored for 20 years, Nuclear Engineering and Design, vol.238, issue.5, pp.1250-1259, 2008.
DOI : 10.1016/j.nucengdes.2007.03.041

M. Iwasawa, T. Ohnuma, and N. Soneda, <I>Ab Initio</I> Electronic Structure Study of &alpha;-Zirconium and Hydrogen, MATERIALS TRANSACTIONS, vol.49, issue.12, pp.2765-2769, 2008.
DOI : 10.2320/matertrans.MRA2008184

M. Lewis, Deuterium-defect trapping in ion-irradiated zirconium, Journal of Nuclear Materials, vol.125, issue.2, pp.152-159, 1984.
DOI : 10.1016/0022-3115(84)90542-7

K. Une, S. Ishimoto, Y. Etoh, K. Ito, K. Ogata et al., The terminal solid solubility of hydrogen in irradiated Zircaloy-2 and microscopic modeling of hydride behavior, Journal of Nuclear Materials, vol.389, issue.1, pp.127-136, 2009.
DOI : 10.1016/j.jnucmat.2009.01.017

F. Garzarolli, R. Manzel, and A. Seibold, Corrosion phenomena at high burnup, 10th International Conference on Environmental Degradation of Materials in Nuclear Power Systems, 2001.