A. Al-rub, R. Tehrani, A. Darabi, and M. , Application of a large deformation nonlinear-viscoelastic viscoplastic viscodamage constitutive model to polymers and their composites, International Journal of Damage Mechanics, vol.55, issue.2, 2014.
DOI : 10.1016/j.compscitech.2003.11.012

S. Ahzi, A. Makradi, R. Gregory, and D. Edie, Modeling of deformation behavior and strain-induced crystallization in poly(ethylene terephthalate) above the glass transition temperature, Mechanics of Materials, vol.35, issue.12, pp.1139-1148, 2003.
DOI : 10.1016/S0167-6636(03)00004-8

A. Cayzac and H. , Analyses expérimentale et numérique de l'endommagement matriciel d'un matériau composite. Cas d'un pultrudé thermoplastique renforcé de fibres de verre, 2014.

F. Andrade, J. C. De-sá, and F. Pires, Assessment and comparison of non-local integral models for ductile damage, International Journal of Damage Mechanics, vol.23, issue.2, pp.261-296, 2014.
DOI : 10.1016/j.ijmecsci.2005.03.003

G. Ayoub, M. Naït-abdelazi, F. Zaïri, J. Gloaguen, and P. Charrier, A continuum damage model for the high-cycle fatigue life prediction of styrene-butadiene rubber under multiaxial loading, International Journal of Solids and Structures, vol.48, issue.18, pp.2458-2466, 2011.
DOI : 10.1016/j.ijsolstr.2011.04.003
URL : https://hal.archives-ouvertes.fr/hal-00607913

C. Baudet, J. Grandidier, and L. Canémi, A two-phase model for the diffuso-mechanical behaviour of semicrystalline polymers in gaseous environment, International Journal of Solids and Structures, vol.46, issue.6, pp.1389-1401, 2009.
DOI : 10.1016/j.ijsolstr.2008.11.010

F. Bédoui, J. Diani, and G. Régnier, Micromechanical modeling of elastic properties in polyolefins, Polymer, vol.45, issue.7, pp.2433-2442, 2004.
DOI : 10.1016/j.polymer.2004.01.028

B. Hamouda, H. Laiarinandrasana, L. Piques, and R. , Viscoplastic behaviour of a medium density polyethylene (MDPE): Constitutive equations based on double nonlinear deformation model, International Journal of Plasticity, vol.23, pp.1307-1327, 2007.
DOI : 10.1016/j.ijplas.2007.01.005
URL : https://hal.archives-ouvertes.fr/hal-00154584

J. Besson and C. Guillemer-neel, An extension of the Green and Gurson models to kinematic hardening, Mechanics of Materials, vol.35, issue.1-2, pp.1-18, 2003.
DOI : 10.1016/S0167-6636(02)00169-2

J. Besson, R. Leriche, R. Foerch, and G. Cailletaud, Object-Oriented Programming Applied to the Finite Element Method Part II. Application to Material Behaviors, Revue Europ??enne des ??l??ments Finis, vol.62, issue.1, pp.567-588, 1998.
DOI : 10.1093/comjnl/7.4.308

G. Bles, W. Nowacki, and A. Tourabi, Experimental study of the cyclic visco-elasto-plastic behaviour of a polyamide fibre strap, International Journal of Solids and Structures, vol.46, issue.13, pp.2693-2705, 2009.
DOI : 10.1016/j.ijsolstr.2009.02.015
URL : https://hal.archives-ouvertes.fr/hal-00449111

G. Boisot, L. Laiarinandrasana, J. Besson, C. Fond, and G. Hochstetter, Experimental investigations and modeling of volume change induced by void growth in polyamide 11, International Journal of Solids and Structures, vol.48, issue.19, pp.2642-2654, 2011.
DOI : 10.1016/j.ijsolstr.2011.05.016
URL : https://hal.archives-ouvertes.fr/hal-00624022

M. Boudifa, K. Saanouni, and J. Chaboche, A micromechanical model for inelastic ductile damage prediction in polycrystalline metals for metal forming, International Journal of Mechanical Sciences, vol.51, issue.6, pp.453-464, 2009.
DOI : 10.1016/j.ijmecsci.2009.03.014

M. Brunig, S. Gerke, and V. Hagenbrock, Micro-mechanical studies on the effect of the stress triaxiality and the Lode parameter on ductile damage, International Journal of Plasticity, vol.50, pp.49-65, 2013.
DOI : 10.1016/j.ijplas.2013.03.012

N. Brusselle-dupend and L. Cangémi, A two-phase model for the mechanical behaviour of semicrystalline polymers. Part II ??? Modelling of the time-dependent mechanical behaviour of an isotropic and a highly oriented HDPE grade, Mechanics of Materials, vol.40, issue.9, pp.761-770, 2008.
DOI : 10.1016/j.mechmat.2008.03.010

H. Cayzac, K. Saï, and L. Laiarinandrasana, Damage based constitutive relationships in semi-crystalline polymer by using multi-mechanisms model, International Journal of Plasticity, vol.51, pp.47-64, 2013.
DOI : 10.1016/j.ijplas.2013.06.008
URL : https://hal.archives-ouvertes.fr/hal-00905508

J. Chaboche, Continuum damage mechanics: Present state and future trends, Nuclear Engineering and Design, vol.105, issue.1, pp.19-33, 1987.
DOI : 10.1016/0029-5493(87)90225-1

J. Chaboche, M. Boudifa, and K. Saanouni, A CDM Approach of Ductile Damage with Plastic Compressibility, International Journal of Fracture, vol.32, issue.1, pp.51-75, 2006.
DOI : 10.1016/B978-0-08-043601-2.50005-2

O. Colak and E. Krempl, Modeling of the monotonic and cyclic Swift effects using an isotropic, finite viscoplasticity theory based on overstress (FVBO), International Journal of Plasticity, vol.21, issue.3, pp.573-588, 2005.
DOI : 10.1016/j.ijplas.2004.04.010

B. Cotterell, J. Chia, and K. Hbaieb, Fracture mechanisms and fracture toughness in semicrystalline polymer nanocomposites, Engineering Fracture Mechanics, vol.74, issue.7, pp.1054-1078, 2007.
DOI : 10.1016/j.engfracmech.2006.12.023

M. Danielsson, D. Parks, and M. Boyce, Three-dimensional micromechanical modeling of voided polymeric materials, Journal of the Mechanics and Physics of Solids, vol.50, issue.2, pp.351-379, 2002.
DOI : 10.1016/S0022-5096(01)00060-6

F. Detrez, S. Cantournet, and R. Seguela, Plasticity/damage coupling in semicrystalline polymers prior to yielding: micromechanisms and damage law identification, Polymer, vol.52, 1998.
DOI : 10.1016/j.polymer.2011.03.012
URL : https://hal.archives-ouvertes.fr/hal-00592106

A. Drozdov, Time-dependent response of polypropylene after strain reversal, International Journal of Solids and Structures, vol.47, issue.24, pp.3221-3233, 2010.
DOI : 10.1016/j.ijsolstr.2010.08.001
URL : https://doi.org/10.1016/j.ijsolstr.2010.08.001

A. Drozdov, Mechanical response of polypropylene under multiple-step loading, International Journal of Solids and Structures, vol.50, issue.5, pp.815-823, 2013.
DOI : 10.1016/j.ijsolstr.2012.11.014
URL : https://doi.org/10.1016/j.ijsolstr.2012.11.014

A. Drozdov and J. Christiansen, Thermo-viscoelastic and viscoplastic behavior of high-density polyethylene, International Journal of Solids and Structures, vol.45, issue.14-15, pp.4274-4288, 2008.
DOI : 10.1016/j.ijsolstr.2008.03.008
URL : https://doi.org/10.1016/j.ijsolstr.2008.03.008

N. Dusunceli and O. Colak, Modelling effects of degree of crystallinity on mechanical behavior of semicrystalline polymers, International Journal of Plasticity, vol.24, issue.7, pp.1224-1242, 2007.
DOI : 10.1016/j.ijplas.2007.09.003

A. Epee, F. Lauro, B. Bennani, and B. Bourel, Constitutive model for a semi-crystalline polymer under dynamic loading, International Journal of Solids and Structures, vol.48, issue.10, pp.1590-1599, 2011.
DOI : 10.1016/j.ijsolstr.2011.02.009
URL : https://doi.org/10.1016/j.ijsolstr.2011.02.009

J. Faleskog, X. Gao, and C. Shih, Cell model for nonlinear fracture analysis ? I. Micromechanics calibration, International Journal of Fracture, vol.89, issue.4, pp.355-373, 1998.
DOI : 10.1023/A:1007421420901

P. Frontini, L. F. Alejandra, and F. Rueda, Non linear fracture mechanics of polymers: Load Separation and Normalization methods, Engineering Fracture Mechanics, vol.79, pp.389-414, 2012.
DOI : 10.1016/j.engfracmech.2011.11.020

A. Gurson, Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I???Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, issue.1, pp.2-15, 1977.
DOI : 10.1115/1.3443401
URL : https://www.osti.gov/servlets/purl/7351470

R. Hambli, Comparison between Lemaitre and Gurson damage models in crack growth simulation during blanking process, International Journal of Mechanical Sciences, vol.43, issue.12, pp.2769-2790, 2001.
DOI : 10.1016/S0020-7403(01)00070-4

R. Hambli, Finite element simulation of fine blanking processes using a pressure-dependent damage model, Journal of Materials Processing Technology, vol.116, issue.2-3, pp.252-264, 2001.
DOI : 10.1016/S0924-0136(01)01009-3

P. Ladeveze, Nonlinear Computational Structural Mechanics ? New Approaches and Non-Incremental Methods of Calculation, 1999.

L. Laiarinandrasana, T. Morgeneyer, H. Proudhon, and C. Regrain, Damage of semicrystalline polyamide 6 assessed by 3D X-ray tomography: From microstructural evolution to constitutive modeling, Journal of Polymer Science Part B: Polymer Physics, vol.38, issue.13, pp.1516-1525, 2010.
DOI : 10.1038/physci237122a0
URL : https://hal.archives-ouvertes.fr/hal-00509794

P. Leevers, An engineering model for rapid crack propagation along fluid pressurized plastic pipe, Engineering Fracture Mechanics, vol.96, pp.539-557, 2012.
DOI : 10.1016/j.engfracmech.2012.09.001
URL : http://spiral.imperial.ac.uk/bitstream/10044/1/13840/2/Engineering%20Fracture%20Mechanics_96_2012.pdf

J. Lemaitre and R. Desmorat, Section 6.14 ? isotropic and anisotropic damage law of evolution, Handbook of Materials Behavior Models, pp.513-524, 2001.

J. Lemaitre, R. Desmorat, and M. Sauzay, Anisotropic damage law of evolution, European Journal of Mechanics - A/Solids, vol.19, issue.2, pp.187-208, 2000.
DOI : 10.1016/S0997-7538(00)00161-3

H. Li, M. Fu, J. Lu, and H. Yang, Ductile fracture: Experiments and computations, International Journal of Plasticity, vol.27, issue.2, pp.147-180, 2011.
DOI : 10.1016/j.ijplas.2010.04.001
URL : http://hdl.handle.net/10397/27512

L. Malcher, F. Andrade-pires, and J. César-de-sá, An assessment of isotropic constitutive models for ductile fracture under high and low stress triaxiality, International Journal of Plasticity, vol.30, issue.31, pp.30-31, 2012.
DOI : 10.1016/j.ijplas.2011.10.005

A. Mkaddem, R. Hambli, and A. Potiron, Comparison between Gurson and Lemaitre damage models in wiping die bending processes, The International Journal of Advanced Manufacturing Technology, vol.23, issue.5-6, pp.451-461, 2004.
DOI : 10.1007/s00170-003-1701-3

V. Monchiet, O. Cazacu, E. Charkaluk, and D. Kondo, Macroscopic yield criteria for plastic anisotropic materials containing spheroidal voids, International Journal of Plasticity, vol.24, issue.7, pp.1158-1189, 2008.
DOI : 10.1016/j.ijplas.2007.08.008
URL : https://hal.archives-ouvertes.fr/hal-00275511

K. Nahshon, J. W. Hutchinson, and J. , Modification of the Gurson Model for shear failure, European Journal of Mechanics - A/Solids, vol.27, issue.1, pp.1-17, 2008.
DOI : 10.1016/j.euromechsol.2007.08.002

K. Nahshon and Z. Xue, A modified Gurson model and its application to punch-out experiments, Engineering Fracture Mechanics, vol.76, issue.8, pp.997-1009, 2009.
DOI : 10.1016/j.engfracmech.2009.01.003

K. Nielsen and V. Tvergaard, Effect of a shear modified Gurson model on damage development in a FSW tensile specimen, International Journal of Solids and Structures, vol.46, issue.3-4, pp.587-601, 2009.
DOI : 10.1016/j.ijsolstr.2008.09.011

S. Nikolov and I. Doghri, A micro/macro constitutive model for the small-deformation behavior of polyethylene, Polymer, vol.41, issue.5, pp.1883-1891, 2000.
DOI : 10.1016/S0032-3861(99)00330-4

A. Ognedal, A. Clausen, A. Dahlen, and O. Hopperstad, Behavior of PVC and HDPE under highly triaxial stress states: An experimental and numerical study, Mechanics of Materials, vol.72, pp.94-108, 2014.
DOI : 10.1016/j.mechmat.2014.02.002
URL : http://hdl.handle.net/11250/2464904

A. Oral, G. Anlas, and J. Lambros, Determination of Gurson???Tvergaard???Needleman Model Parameters for Failure of a Polymeric Material, International Journal of Damage Mechanics, vol.21, issue.1, pp.3-25, 2012.
DOI : 10.1002/pen.21042

T. Pardoen and J. Hutchinson, An extended model for void growth and coalescence, Journal of the Mechanics and Physics of Solids, vol.48, issue.12, pp.2467-2512, 2000.
DOI : 10.1016/S0022-5096(00)00019-3

A. Pawlak and A. Galeski, Cavitation during Tensile Deformation of Polypropylene, Macromolecules, vol.41, issue.8, pp.2839-2851, 2008.
DOI : 10.1021/ma0715122

A. Pawlak and A. Galeski, Cavitation and morphological changes in polypropylene deformed at elevated temperatures, Journal of Polymer Science Part B: Polymer Physics, vol.50, issue.12, pp.1271-1280, 2010.
DOI : 10.1002/polb.22020
URL : http://bib-pubdb1.desy.de//record/93499/files/fulltext.pdf

A. Pirondi, N. Bonora, D. Steglich, W. Brocks, and D. Hellmann, Simulation of failure under cyclic plastic loading by damage models, International Journal of Plasticity, vol.22, issue.11, pp.2146-2170, 2006.
DOI : 10.1016/j.ijplas.2006.03.007
URL : http://www.hzg.de/imperia/md/content/gkss/zentrale_einrichtungen/bibliothek/journals/2006/Pirondi-injourplas.pdf

C. Regrain, L. Laiarinandrasana, and S. Toillon, Experimental and numerical study of creep and creep rupture behavior of PA6, Engineering Fracture Mechanics, vol.76, issue.18, pp.2656-2665, 2009.
DOI : 10.1016/j.engfracmech.2009.04.016
URL : https://hal.archives-ouvertes.fr/hal-00438802

C. Regrain, L. Laiarinandrasana, S. Toillon, and K. Saï, Multi-mechanism models for semi-crystalline polymer: Constitutive relations and finite element implementation, International Journal of Plasticity, vol.25, issue.7, pp.1253-1279, 2009.
DOI : 10.1016/j.ijplas.2008.09.010
URL : https://hal.archives-ouvertes.fr/hal-00390737

J. Ricard, F. Guigné, and L. Laiarinandrasana, Damage and fracture mechanisms of polyoxymethylene: Multiscale experimental study and finite element modeling, Engineering Fracture Mechanics, vol.115, pp.270-283, 2014.
DOI : 10.1016/j.engfracmech.2013.11.011
URL : https://hal.archives-ouvertes.fr/hal-00942920

A. Rozanski and A. Galeski, Plastic yielding of semicrystalline polymers affected by amorphous phase, International Journal of Plasticity, vol.41, pp.14-29, 2013.
DOI : 10.1016/j.ijplas.2012.07.008

K. Saanouni, On the numerical prediction of the ductile fracture in metal forming, Engineering Fracture Mechanics, vol.75, issue.11, pp.3545-3559, 2008.
DOI : 10.1016/j.engfracmech.2007.02.023

K. Saï, L. Laiarinandrasana, B. Naceur, I. Besson, J. Jeridi et al., Multi-mechanism damage-plasticity model for semi-crystalline polymer: Creep damage of notched specimen of PA6, Materials Science and Engineering: A, vol.528, issue.3, pp.1087-1093, 2011.
DOI : 10.1016/j.msea.2010.09.071

N. Sheng, M. Boyce, D. Parks, G. Rutledge, J. Abes et al., Multiscale micromechanical modeling of polymer/clay nanocomposites and the effective clay particle, Polymer, vol.45, issue.2, pp.487-506, 2004.
DOI : 10.1016/j.polymer.2003.10.100

A. Shojaei and G. Li, Viscoplasticity analysis of semicrystalline polymers: A multiscale approach within micromechanics framework, International Journal of Plasticity, vol.42, pp.31-49, 2013.
DOI : 10.1016/j.ijplas.2012.09.014

J. Stoer, Principles of Sequential Quadratic Programming Methods for Solving Nonlinear Programs, NATO ASI Series, 1985.
DOI : 10.1007/978-3-642-82450-0_6

V. Tvergaard and K. Nielsen, Relations between a micro-mechanical model and a damage model for ductile failure in shear, Journal of the Mechanics and Physics of Solids, vol.58, issue.9, pp.1243-1252, 2010.
DOI : 10.1016/j.jmps.2010.06.006

J. Van-dommelen, D. Parks, M. Boyce, W. Brekelmans, and F. Baaijens, Micromechanical modeling of the elasto-viscoplastic behavior of semi-crystalline polymers, Journal of the Mechanics and Physics of Solids, vol.51, issue.3, pp.519-541, 2003.
DOI : 10.1016/S0022-5096(02)00063-7

L. Wang, F. Zhou, Z. Sun, Y. Wang, and S. Shi, Studies on Rate-dependent Macro-damage Evolution of Materials at High Strain Rates, International Journal of Damage Mechanics, vol.8, issue.7, pp.805-820, 2010.
DOI : 10.1016/j.ijsolstr.2005.06.083

F. Zaïri, M. Naït-abdelaziz, J. Gloaguen, and J. Lefebvre, A physically-based constitutive model for anisotropic damage in rubber-toughened glassy polymers during finite deformation, International Journal of Plasticity, vol.27, issue.1, pp.25-51, 2011.
DOI : 10.1016/j.ijplas.2010.03.007