A. Abdennadher, M. Vincent, and T. Et-budtova, Rheological properties of molten natural fibre-polymer composite: cases of flax and Tencel ®, Colloque Mecamat Aussois, 2014.

G. Ausias, J. F. Agassant, M. Vincent, P. G. Lafleur, P. Lavoie et al., Rheology of short glass fiber reinforced polypropylene, Journal of Rheology, vol.36, issue.4, pp.525-542, 1992.
DOI : 10.1122/1.550362
URL : https://hal.archives-ouvertes.fr/hal-00403249

F. Berzin, B. Vergnes, and J. Et-beaugrand, Evolution of lignocellulosic fibre lengths along the screw profile during twin screw compounding with polycaprolactone, Composites Part A: Applied Science and Manufacturing, vol.59, 2014.
DOI : 10.1016/j.compositesa.2013.12.008
URL : https://hal.archives-ouvertes.fr/hal-00945373

J. M. Burgers, On the Motion of Small Particles of Elongated Form. Suspended in a Viscous Liquid, Second report on viscosity and plasticity, 1938.
DOI : 10.1007/978-94-011-0195-0_9

S. M. Dinh and R. C. Armstrong, A Rheological Equation of State for Semiconcentrated Fiber Suspensions, Journal of Rheology, vol.28, issue.3, pp.207-227, 1984.
DOI : 10.1122/1.549748

M. Djalili-mogaddam and S. Et-toll, A model for short-range interactions in fibre suspensions, Journal of Non-Newtonian Fluid Mechanics, vol.132, issue.1-3, pp.73-83, 2005.
DOI : 10.1016/j.jnnfm.2005.08.014

A. Durin, D. Micheli, P. Ville, J. Inceoglu, F. Valette et al., A matricial approach of fibre breakage in twin-screw extrusion of glass fibres reinforced thermoplastics, Composites Part A: Applied Science and Manufacturing, vol.48, pp.48-95, 2013.
DOI : 10.1016/j.compositesa.2012.12.011
URL : https://hal.archives-ouvertes.fr/hal-00795669

J. Ferec, G. Ausias, M. C. Heuzey, and P. J. Carreau, Modeling fiber interactions in semiconcentrated fiber suspensions, Journal of Rheology, vol.53, issue.1, pp.49-72, 2009.
DOI : 10.1122/1.3000732

F. Folgar and C. L. Et-tucker, Orientation Behavior of Fibers in Concentrated Suspensions, Journal of Reinforced Plastics and Composites, vol.3, issue.2, pp.98-119, 1984.
DOI : 10.1177/073168448400300201

V. B. Gupta, R. K. Mittal, P. K. Sharma, G. Mennig, and J. Et-wolters, Some studies on glass fiber-reinforced polypropylene. Part I: Reduction in fiber length during processing, Polymer Composites, vol.31, issue.1, pp.8-15, 1989.
DOI : 10.1002/pc.750100103

F. Inceoglu, J. Ville, N. Ghamri, J. L. Pradel, A. Durin et al., Correlation between processing conditions and fiber breakage during compounding of glass fiber-reinforced polyamide, Polymer Composites, vol.38, issue.11, pp.1842-1850, 2011.
DOI : 10.1002/pc.21217
URL : https://hal.archives-ouvertes.fr/hal-00636530

G. B. Jeffery, The Motion of Ellipsoidal Particles Immersed in a Viscous Fluid, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.102, issue.715, pp.161-79, 1922.
DOI : 10.1098/rspa.1922.0078

P. Laure, L. Silva, and M. Vincent, Modelling short fibre polymer reinforcements for composites " , In Composite reinforcements for optimum performance, P. Boisse Ed, pp.616-650, 2011.

L. Duc, A. Vergnes, B. Budtova, and T. , Polypropylene/natural fibres composites: Analysis of fibre dimensions after compounding and observations of fibre rupture by rheo-optics, Composites Part A: Applied Science and Manufacturing, vol.42, issue.11, pp.42-1727, 2011.
DOI : 10.1016/j.compositesa.2011.07.027
URL : https://hal.archives-ouvertes.fr/hal-00623531

L. Moigne, N. Van-den-oever, M. Et-budtova, and T. , A statistical analysis of fibre size and shape distribution after compounding in composites reinforced by natural fibres, Composites Part A: Applied Science and Manufacturing, vol.42, issue.10, pp.42-1542, 2011.
DOI : 10.1016/j.compositesa.2011.07.012
URL : https://hal.archives-ouvertes.fr/hal-00617421

G. G. Lipscomb, M. M. Denn, D. U. Hur, and D. V. Et-boger, The flow of fiber suspensions in complex geometries, Journal of Non-Newtonian Fluid Mechanics, vol.26, issue.3, pp.297-325, 1988.
DOI : 10.1016/0377-0257(88)80023-5

C. R. Sandstrom and C. L. Tucker, A theory for concentrated fiber suspensions with strong fiber-fiber interactions, Makromolekulare Chemie. Macromolecular Symposia, vol.3, issue.7, pp.291-300, 1993.
DOI : 10.1002/masy.19930680122

C. Servais, J. A. Manson, and S. Et-toll, Fiber???fiber interaction in concentrated suspensions: Disperse fibers, Journal of Rheology, vol.43, issue.4, pp.991-1004, 1999.
DOI : 10.1122/1.551014

K. Shon, D. Liu, and J. L. Et-white, Experimental Studies and Modeling of Development of Dispersion and Fiber Damage in Continuous Compounding, International Polymer Processing, vol.20, issue.3, pp.322-331, 2005.
DOI : 10.3139/217.1894

B. Souloumiac and M. Vincent, Steady shear viscosity of short fibre suspensions in thermoplastics, Rheologica Acta, vol.37, issue.3, pp.289-298, 1998.
DOI : 10.1007/s003970050116
URL : https://hal.archives-ouvertes.fr/hal-00574898

S. R. Tremblay, P. G. Lafleur, and A. Et-ait-kadi, Effects of injection parameters on fiber attrition and mechanical properties of polystyrene molded parts, J. Inj. Molding Tech, vol.4, pp.1-7, 2000.

B. Vergnes, D. Valle, G. Et-delamare, and L. , A global computer software for polymer flows in corotating twin screw extruders, Polymer Engineering & Science, vol.11, issue.11, pp.1781-92, 1998.
DOI : 10.1002/pen.10348
URL : https://hal.archives-ouvertes.fr/hal-00573794

J. Ville, F. Inceoglu, N. Ghamri, J. L. Pradel, A. Durin et al., Influence of Extrusion Conditions on Fiber Breakage along the Screw Profile during Twin Screw Compounding of Glass Fiber-reinforced PA, International Polymer Processing, vol.28, issue.1, pp.28-49, 2013.
DOI : 10.3139/217.2659
URL : https://hal.archives-ouvertes.fr/hal-00825157

M. Vincent, T. Giroud, A. Clarke, and C. Et-eberhardt, Description and modeling of fiber orientation in injection molding of fiber reinforced thermoplastics, Polymer, vol.46, issue.17, pp.46-6719, 2005.
DOI : 10.1016/j.polymer.2005.05.026
URL : https://hal.archives-ouvertes.fr/hal-00530704

M. Vincent, Modelling of Short Fibre-Reinforced Thermoplastics??? Flows in Polymer Processing, Structure Development during Polymer Processing, pp.345-363, 2000.
DOI : 10.1007/978-94-011-4138-3_17
URL : https://hal.archives-ouvertes.fr/hal-00537054

M. M. Vincent, A. I. Kamal, S. J. Isayev, and . Liu, Flow induced fiber micro-structure in injection molding of fiber reinforced materials " dans Injection molding, technology and fundamentals, pp.253-272, 2009.

W. Weibull, A statistical distribution function of wide applicability, J. Appl. Mech, vol.18, pp.293-297, 1951.