M. Bernacki, H. Resk, T. Coupez, and R. Logé, Finite element model of primary recrystallization in polycrystalline aggregates using a level set framework, Modelling and Simulation in Materials Science and Engineering, vol.17, issue.6, p.64006, 2009.
DOI : 10.1088/0965-0393/17/6/064006

URL : https://hal.archives-ouvertes.fr/hal-00508362

M. Bernacki, R. Loge, and T. Coupez, Level set framework for the finite-element modelling of recrystallization and grain growth in polycrystalline materials, Scripta Materialia, vol.64, issue.6, pp.525-528, 2011.
DOI : 10.1016/j.scriptamat.2010.11.032

URL : https://hal.archives-ouvertes.fr/hal-00577039

P. Bernard, S. Bag, K. Huang, and R. E. Logé, A two-site mean field model of discontinuous dynamic recrystallization, Materials Science and Engineering: A, vol.528, issue.24, pp.7357-7367, 2011.
DOI : 10.1016/j.msea.2011.06.023

URL : https://hal.archives-ouvertes.fr/hal-00612438

C. Bohatier and J. Chenot, Finite element formulations for non-steady-state large viscoplastic deformation, International Journal for Numerical Methods in Engineering, vol.4, issue.9, pp.1697-1708, 1985.
DOI : 10.1002/nme.1620210911

M. Bonte, L. Fourment, T. Do, A. Van-den-boogaard, and J. Huétink, Optimization of forging processes using Finite Element simulations, Structural and Multidisciplinary Optimization, pp.797-810, 2010.

P. Bouchard, L. Bourgeon, S. Fayolle, and K. Mocellin, An enhanced Lemaitre model formulation for materials processing damage computation, International Journal of Material Forming, vol.24, issue.3, pp.299-315, 2011.
DOI : 10.1007/s12289-010-0996-5

URL : https://hal.archives-ouvertes.fr/hal-00521625

A. Brandt, Multiscale Scientific Computation: Review, pp.3-95, 2001.

T. S. Cao, A. Gaillac, P. Montmitonnet, and P. Bouchard, Identification methodology and comparison of phenomenological ductile damage models via hybrid numerical???experimental analysis of fracture experiments conducted on a zirconium alloy, International Journal of Solids and Structures, vol.50, issue.24, pp.3989-3999, 2013.
DOI : 10.1016/j.ijsolstr.2013.08.011

URL : https://hal.archives-ouvertes.fr/hal-00861363

T. Cao, G. J. , -. Montmitonnet, P. Bouchard, and P. , A Lode-dependent enhanced Lemaitre model for ductile fracture prediction at low stress triaxiality, Engineering Fracture Mechanic, pp.124-125, 2014.

T. S. Cao, E. Maire, C. Verdu, C. Bobadilla, P. Lasne et al., Characterization of ductile damage for a high carbon steel using 3D X-ray micro-tomography and mechanical tests ??? Application to the identification of a shear modified GTN model, Computational Materials Science, vol.84, pp.175-187, 2014.
DOI : 10.1016/j.commatsci.2013.12.006

URL : https://hal.archives-ouvertes.fr/hal-00944805

L. Q. Chen, A novel computer simulation technique for modeling grain growth, Scripta Metallurgica et Materialia, vol.32, issue.1, pp.115-120, 1995.
DOI : 10.1016/S0956-716X(99)80022-3

J. Chenot, A velocity approach to finite element calculation of elastoplastic and viscoplastic deformation processes, Engineering Computations, pp.2-9, 1984.

J. Chenot, C. Béraudo, M. Bernacki, and L. Fourment, Finite Element Simulation of Multi Material Metal Forming, 11th International Conference on Technology of Plasticity, 2014.
DOI : 10.1016/j.proeng.2014.10.345

URL : https://hal.archives-ouvertes.fr/hal-01110930

F. Chinesta and E. Cueto, Introduction, PGD-Based Modeling of Materials, Structures and Processes, pp.1-24, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01007372

G. C. Cornfield and R. H. Johnson, Theoretical predictions of plastic flow in hot rolling including the effect of various temperature distributions, J. Iron Steel Inst, vol.211, p.567, 1973.

T. Coupez, H. Digonnet, and R. Ducloux, Parallel meshing and remeshing, Applied Mathematical Modelling, vol.25, issue.2, pp.153-157, 2000.
DOI : 10.1016/S0307-904X(00)00045-7

URL : https://hal.archives-ouvertes.fr/hal-00536635

P. R. Dawson, M. P. Miller, T. Han, and J. Bernier, An Accelerated Methodology for the Evaluation of Critical Properties in Polyphase Alloys, Metal, Mater Trans A 36A, vol.7, pp.1627-1641, 2005.

F. Delalondre, Simulation and 3-D analysis of adiabatic shear bands in high speed metal forming processes, PhD Mines ParisTech, p.243, 2008.

R. Ducloux, From the forging to the complete manufacturing chain Simulation, 46 th ICFG Plenary Meeting, 2013.

R. Ducloux, M. Barbelet, and L. Fourment, Automatic optimization of a complete manufacturing chain, NUMIFORM, AIP Conf. Proc. 1532, p.665, 2013.
DOI : 10.1063/1.4806892

M. Ejday and L. Fourment, Metamodel assisted multi-objective optimization for metal forming applications, Mecanique & Industries, vol.11, pp.3-4, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00574112

E. Khaoulani, R. Bouchard, and P. , An anisotropic mesh adaptation strategy for damage and failure in ductile materials, Finite Elements in Analysis and Design, pp.1-10, 2012.

M. Elsey, S. Esedoglu, and P. Smereka, Diffusion generated motion for grain growth in two and three dimensions, Journal of Computational Physics, vol.228, issue.21, pp.8015-8033, 2009.
DOI : 10.1016/j.jcp.2009.07.020

L. Fourment, J. Chenot, and D. R. Owen, Computational Plasticity, Fundamentals and Applications, pp.199-212, 1992.

L. Fourment, Meta-Model Based Optimisation Algorithms for Robust Optimization of 3D Forging Sequences, AIP Conference Proceedings, pp.21-26, 2007.
DOI : 10.1063/1.2729482

URL : https://hal.archives-ouvertes.fr/hal-00510544

L. Fourment, J. L. Chenot, and K. Mocellin, Numerical formulations and algorithms for solving contact problems in metal forming simulation, International Journal for Numerical Methods in Engineering, vol.112, issue.9, pp.1435-1462, 1999.
DOI : 10.1002/(SICI)1097-0207(19991130)46:9<1435::AID-NME707>3.0.CO;2-9

URL : https://hal.archives-ouvertes.fr/hal-00541005

J. Gachet, G. Delattre, and P. Bouchard, Fracture mechanisms under monotonic and non-monotonic low Lode angle loading, Engineering Fracture Mechanics, vol.124, issue.125, pp.124-125, 2014.
DOI : 10.1016/j.engfracmech.2014.04.009

URL : https://hal.archives-ouvertes.fr/hal-01023769

C. Gruau and T. Coupez, 3D tetrahedral, unstructured and anisotropic mesh generation with adaptation to natural and multidomain metric, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.48-49, pp.48-49, 2005.
DOI : 10.1016/j.cma.2004.11.020

URL : https://hal.archives-ouvertes.fr/hal-00517639

G. Hirt, R. Kopp, O. Hofmann, M. Franzke, and G. Barton, Implementing a high accuracy Multi-Mesh Method for incremental Bulk Metal Forming, CIRP Annals - Manufacturing Technology, vol.56, issue.1, pp.313-316, 2007.
DOI : 10.1016/j.cirp.2007.05.072

K. Hitti, P. Laure, T. Coupez, L. Silva, and M. Bernacki, Precise generation of complex statistical Representative Volume Elements (RVEs) in a finite element context, Computational Materials Science, vol.61, pp.224-238, 2012.
DOI : 10.1016/j.commatsci.2012.04.011

URL : https://hal.archives-ouvertes.fr/hal-00699554

K. Iwata, K. Osakada, and S. Fujino, Analysis of hydrostatic extrusion by the finite element method., Transactions of the ASME, pp.94-96, 1972.

O. Jaouen, F. Costes, M. Barbelet, and P. Lasne, From continuous casting to rolling process simulation with a full 3D powerful software tool, pp.7-8, 2014.

O. Jaouen, F. Costes, P. Lasne, C. Fourment, and M. Barbelet, Numerical simulation of a shell forming, from hollow ingot to the final product, with a powerful software tool The superconvergence patch recovery technique and data transfer operators in 3D plasticity problems, Finite Elements in Analysis and Design, International Conference on Ingot Casting Rolling & Forging, vol.7, issue.8, pp.630-648, 2007.

N. Kim, S. Machida, and S. Koboyashi, Ring rolling process simulation by the three dimensional finite element method, International Journal of Machine Tools and Manufacture, vol.30, issue.4, pp.569-577, 1990.
DOI : 10.1016/0890-6955(90)90008-7

G. Kugler and R. Turk, Study of the influence of initial microstructure topology on the kinetics of static recrystallization using a cellular automata model, Computational Materials Science, vol.37, issue.3, pp.284-291, 2006.
DOI : 10.1016/j.commatsci.2005.07.005

S. Kumar, L. Fourment, and S. Guerdoux, Parallel, second-order and consistent remeshing transfer operators for evolving meshes with superconvergence property on surface and volume. Finite Elements in Analysis and Design, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01143752

J. Lebon, L. Quillec, G. Breitkopf, P. Coelho, R. F. Villon et al., A two-pronged approach for springback variability assessment using sparse polynomial chaos expansion and multi-level simulations, International Journal of Material Forming, vol.32, issue.2, pp.275-287, 2014.
DOI : 10.1007/s12289-013-1126-y

URL : https://hal.archives-ouvertes.fr/hal-01333054

C. H. Lee and S. Kobayashi, New Solutions to Rigid-Plastic Deformation Problems Using a Matrix Method, Journal of Engineering for Industry, vol.95, issue.3, p.865, 1973.
DOI : 10.1115/1.3438238

R. Logé, M. Bernacki, H. Resk, L. Delannay, H. Digonnet et al., Linking plastic deformation to recrystallization in metals using digital microstructures, Philosophical Magazine, vol.14, issue.30-32, pp.3691-3712, 2008.
DOI : 10.1016/j.actamat.2006.10.022

P. Mahajan, L. Fourment, and J. Chenot, Implicit scheme for contact analysis in non-steady state forming, Engineering Computations, pp.6-7, 1998.

Y. Mesri, W. Zerguine, H. Digonnet, L. Silva, and T. Coupez, Dynamic parallel mesh adaption for three dimensional unstructured meshes: Application to interface tracking, Proceeding of the 18th IMR, pp.195-212, 2008.
DOI : 10.1007/978-3-540-87921-3_12

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.413.6964

N. Mole, J. ?. Chenot, and L. Fourment, A VELOCITY BASED APPROACH INCLUDING ACCELERATION TO THE FINITE ELEMENT COMPUTATION OF VISCOPLASTIC PROBLEMS, International Journal for Numerical Methods in Engineering, vol.18, issue.20, pp.3439-51, 1996.
DOI : 10.1002/(SICI)1097-0207(19961030)39:20<3439::AID-NME8>3.0.CO;2-V

URL : https://hal.archives-ouvertes.fr/hal-01462158

M. Mukherjee, U. Prahl, and W. Bleck, Modelling of Microstructure and Flow Stress Evolution during Hot Forging, steel research international, vol.35, issue.144, pp.1102-1116, 2010.
DOI : 10.1002/srin.201000114

T. Nagai, S. Ohta, K. Kawasaki, and T. Okuzono, Computer simulation of cellular pattern growth in two and three dimensions, Phase Trans, pp.177-211, 1990.

T. Nagata, Simple local interpolation of surfaces using normal vectors, Computer Aided Geometric Design, vol.22, issue.4, pp.327-347, 2005.
DOI : 10.1016/j.cagd.2005.01.004

K. Nahshon and J. Hutchinson, Modification of the Gurson Model for shear failure, European Journal of Mechanics - A/Solids, vol.27, issue.1, pp.1-17, 2008.
DOI : 10.1016/j.euromechsol.2007.08.002

D. L. Page, Y. Sun, A. F. Koschan, J. Paik, and M. A. Abidi, Normal Vector Voting: Crease Detection and Curvature Estimation on Large, Noisy Meshes, Graphical Models, vol.64, issue.3-4, pp.199-229, 2002.
DOI : 10.1006/gmod.2002.0574

M. Ramadan, L. Fourment, and H. Digonnet, A parallel two mesh method for speeding-up processes with localized deformations: application to cogging, International Journal of Material Forming, vol.56, issue.S1, pp.581-584, 2009.
DOI : 10.1007/s12289-009-0440-x

URL : https://hal.archives-ouvertes.fr/hal-00509412

S. Osher and J. A. Sethian, Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations, Journal of Computational Physics, vol.79, issue.1, pp.12-49, 1988.
DOI : 10.1016/0021-9991(88)90002-2

B. Rey, K. Mocellin, and L. Fourment, A node-nested Galerkin multigrid method for metal forging simulation, Computing and Visualization in Science, vol.125, issue.5, pp.17-25, 2008.
DOI : 10.1007/s00791-006-0054-5

URL : https://hal.archives-ouvertes.fr/hal-00581743

A. D. Rollett and D. Raabe, A hybrid model for mesoscopic simulation of recrystallization, Computational Materials Science, vol.21, issue.1, pp.69-78, 2001.
DOI : 10.1016/S0927-0256(00)00216-0

E. Roux, Mechanical joining-Process optimization strategies and identification of materials mechanical behaviors, 2011.

E. Roux and P. Bouchard, Numerical investigation of ductile damage parameters identification: benefit of local measurements, ICIPE international conference, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00676849

E. Roux, M. Bernacki, and P. Bouchard, A level-set and anisotropic adaptive remeshing strategy for the modeling of void growth under large plastic strain, Computational Materials Science, vol.68, pp.32-46, 2013.
DOI : 10.1016/j.commatsci.2012.10.004

URL : https://hal.archives-ouvertes.fr/hal-00756435

E. Roux, M. Shakoor, M. Bernacki, and P. Bouchard, A new finite element approach for modelling ductile damage void nucleation and growth???analysis of loading path effect on damage mechanisms, Modelling and Simulation in Materials Science and Engineering, 2014.
DOI : 10.1088/0965-0393/22/7/075001

URL : https://hal.archives-ouvertes.fr/hal-01090403

D. Ryckelynck, Hyper-reduction of mechanical models involving internal variables, International Journal for Numerical Methods in Engineering, vol.1, issue.3, pp.75-89, 2009.
DOI : 10.1002/nme.2406

URL : https://hal.archives-ouvertes.fr/hal-00732247

M. Saby, M. Bernacki, E. Roux, and P. Bouchard, Three-dimensional analysis of real void closure at the meso-scale during hot metal forming processes, Computational Materials Science, vol.77, issue.77, pp.194-201
DOI : 10.1016/j.commatsci.2013.05.002

URL : https://hal.archives-ouvertes.fr/hal-00831553

M. Saby, M. Bernacki, and P. Bouchard, Understanding and Modeling of Void Closure Mechanisms in Hot Metal Forming Processes: A Multiscale Approach, 11th International Conference on Technology of Plasticity, ICTP, 2014.
DOI : 10.1016/j.proeng.2014.09.140

URL : https://hal.archives-ouvertes.fr/hal-01110919

M. Saby, P. Bouchard, and M. Bernacki, Void closure criteria for hot metal forming: A review, Journal of Manufacturing Processes, vol.19, 2014.
DOI : 10.1016/j.jmapro.2014.05.006

URL : https://hal.archives-ouvertes.fr/hal-01022635

M. A. Strano, A technique for FEM optimization under reliability constraint of process variables in sheet metal forming, International Journal of Material Forming, vol.2, issue.4, pp.13-20, 2008.
DOI : 10.1007/s12289-008-0001-8

G. Surdon and J. Chenot, Finite element calculation of three-dimensional hot forging, International Journal for Numerical Methods in Engineering, vol.30, issue.11, pp.2107-2117, 1987.
DOI : 10.1002/nme.1620241107

M. Teodorescu, P. Lasne, and R. Logé, Modeling recrystallization for 3D multi-pass forming processes, Materials Science Forum, pp.558-559, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00661829

K. Traore, R. Forestier, K. Mocellin, P. Montmitonnet, and M. Souchet, Three dimensional finite element simulation of ring rolling, 7th International Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2001, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00536354

R. H. Wagoner and J. Chenot, Metal forming analysis, 2001.

J. H. Wiebenga, M. Weiss, B. Rolfe, and A. H. Van-den-boogaard, Product defect compensation by robust optimization of a cold roll forming process, Journal of Materials Processing Technology, vol.213, issue.6, pp.978-986, 2013.
DOI : 10.1016/j.jmatprotec.2013.01.006

N. Zabaras, Y. Bao, A. Srikanth, and W. G. Frazier, A continuum Lagrangian sensitivity analysis for metal forming processes with applications to die design problems, International Journal for Numerical Methods in Engineering, vol.48, issue.5, pp.679-720, 2000.
DOI : 10.1002/(SICI)1097-0207(20000620)48:5<679::AID-NME895>3.3.CO;2-L

O. C. Zienkiewicz and K. Godbole, Flow of plastic and visco-plastic solids with special reference to extrusion and forming processes, International Journal for Numerical Methods in Engineering, vol.5, issue.1, pp.1-16, 1974.
DOI : 10.1002/nme.1620080102

O. C. Zienkiewicz and J. Z. Zhu, The superconvergent patch recovery (SPR) and adaptive finite element refinement, Computer Methods in Applied Mechanics and Engineering, vol.101, issue.1-3, pp.207-224, 1992.
DOI : 10.1016/0045-7825(92)90023-D