O. Edenhofer, R. Pichs-madruga, Y. Sokona, E. Farahani, S. Kadner et al., Climate Change 2014: Mitigation of Climate Change. Contribution of Working Group III to the Fifth Assessment Report of Intergovernmental Panel on Climate Change, 2014.

H. Markus and S. Philippe, Chaudières de puissance, à déchets, à biomasse et de récupération, 2012.

Z. Xingang, T. Zhongfu, and L. Pingkuo, Development goal of 30GW for China???s biomass power generation: Will it be achieved?, Renewable and Sustainable Energy Reviews, vol.25, pp.310-317, 2013.
DOI : 10.1016/j.rser.2013.04.008

B. M. Jenkins, L. L. Baxter, T. R. Miles-jr, and T. R. Miles, Combustion properties of biomass, Fuel Processing Technology, vol.54, issue.1-3, pp.17-46, 1998.
DOI : 10.1016/S0378-3820(97)00059-3

L. Zheng, Oxy-Fuel Combustion for Power Generation and Carbon Dioxide (CO2) Capture. Canada: Canmet ENERGY Ottawa Research Centre, 2011.

A. Skorek-osikowska, L. Bartela, J. Kotowicz, and E. M. Job, Thermodynamic and economic analysis of the different variants of a coal-fired, 460 MW power plant using oxy-combustion technology, Energy Convers, Manag, vol.76, pp.109-120, 2013.

Y. Ju and W. Sun, Plasma assisted combustion: Dynamics and chemistry, Progress in Energy and Combustion Science, vol.48, pp.21-83, 2015.
DOI : 10.1016/j.pecs.2014.12.002

Y. Ju and W. Sun, Plasma assisted combustion: Progress, challenges, and opportunities, Combustion and Flame, vol.162, issue.3, pp.529-532, 2015.
DOI : 10.1016/j.combustflame.2015.01.017

J. M. Bergthorson and M. J. Thomson, A review of the combustion and emissions properties of advanced transportation biofuels and their impact on existing and future engines, Renewable and Sustainable Energy Reviews, vol.42, pp.1393-1417, 2015.
DOI : 10.1016/j.rser.2014.10.034

S. S. Merola, L. Marchitto, C. Tornatore, G. Valentino, and E. A. Irimescu, Optical characterization of combustion processes in a DISI engine equipped with plasma-assisted ignition system, Applied Thermal Engineering, vol.69, issue.1-2, pp.177-187, 2014.
DOI : 10.1016/j.applthermaleng.2014.04.046

A. Starikovskiy and N. Aleksandrov, Plasma-assisted ignition and combustion, Progress in Energy and Combustion Science, vol.39, issue.1, pp.61-110, 2013.
DOI : 10.1016/j.pecs.2012.05.003

A. Warris and F. Weinberg, Ignition and flame stabilization by plasma jets in fast gas streams, Symposium (International) on Combustion, vol.20, issue.1, pp.1825-1831, 1985.
DOI : 10.1016/S0082-0784(85)80680-9

A. Askarova, E. Karpenko, Y. Lavrishcheva, V. E. Messerle, and E. A. Ustimenko, Plasma-Supported Coal Combustion in Boiler Furnace, IEEE Transactions on Plasma Science, vol.35, issue.6, pp.1607-1616, 2007.
DOI : 10.1109/TPS.2007.910142

V. E. Messerle, A. B. Ustimenko, and O. A. Lavrichshev, Plasma-assisted ignition and combustion of pulverized coal at thermal power plants of Kazakhstan, Proceedings of the 2014 International Conference on Power Systems, 2014.

V. E. Messerle, A. B. Ustimenko, and E. I. Karpenko, Plasma Technology for Enhancement of Pulverized Coal Ignition and Combustion, Proceedings of ISPC20, 2011.

P. M. Kanilo, V. I. Kazantsev, N. I. Rasyuk, K. Schünemann, and D. M. Vavriv, Microwave plasma combustion of coal, Fuel, vol.82, issue.2, pp.187-193, 2003.
DOI : 10.1016/S0016-2361(02)00201-6

P. Bukowski, P. Kobel, W. Kordylewski, and E. T. M?czka, Use of cavity plasmatron in pulverized coal muffle burner for start-up of a boiler, Rynek Energii, issue.1, pp.132-136, 2010.

S. Galant, D. Rebuffat, M. Reybillet, and N. Martin, Réacteur haute température associé à une zone de plasmagenèse, en particulier brûleur mixte électricité-combustible, pp.7-1987

S. Leleu and J. Aschard, Bouvier, « Electrobrûleur à gaz à apport d'énergie électrique et amorçage assisté, pp.457994-457995

V. E. Messerle, E. I. Karpenko, and A. B. Ustimenko, Plasma assisted power coal combustion in the furnace of utility boiler: Numerical modeling and full-scale test, Fuel, vol.126, p.294300, 2014.
DOI : 10.1016/j.fuel.2014.02.047

L. Fulcheri, F. Fabry, S. Takali, and V. Rohani, Three-Phase AC Arc Plasma Systems: A Review, Plasma Chemistry and Plasma Processing, vol.11, issue.5, pp.565-585, 2015.
DOI : 10.1007/s11090-015-9619-8

URL : https://hal.archives-ouvertes.fr/hal-01139833

C. Bonet, Contribution to the theoretical study of a refractory spheroidal particle evaporation in ac thermal plasma (in French) State Doctorate es Sciences Physiques defended on, CNRS registration n° A.O. 8262. Because this reference is not available in the Internet, the author (Fulcheri L.) is willing to send it to interested reader upon request, 0199.

. Anonymous, The graphite electrodes electro-burner (in French) Journée d'étude du 30 Octobre 1986, Thermal engineering society (Société Française des Thermiciens), pp 1?13. Because this reference is not available in the Internet, the author (Fulcheri L.) is willing to send it to interested reader upon request

M. Reybillet, Bertin electro-burner: description and mockup tests Journée d'étude du 30 Octobre 1986, Thermal engineering society (Société Française des Thermiciens), 5 pages. Because this reference is not available in the Internet, the author (Fulcheri L.) is willing to send it to interested reader upon request

L. Fulcheri and Y. Schwob, From methane to hydrogen, carbon black and water, International Journal of Hydrogen Energy, vol.20, issue.3, pp.197-202, 1995.
DOI : 10.1016/0360-3199(94)E0022-Q

URL : https://hal.archives-ouvertes.fr/hal-01425269

L. Fulcheri, N. Probst, G. Flamant, F. Fabry, E. Grivei et al., Plasma processing: a step towards the production of new grades of carbon black, Carbon, vol.40, issue.2, pp.169-176, 2002.
DOI : 10.1016/S0008-6223(01)00169-5

URL : https://hal.archives-ouvertes.fr/hal-00542345

L. Fulcheri, Y. Schwob, and G. Flamant, Comparison Between New Carbon Nanostructures Produced by Plasma with Industrial Carbon Black Grades, Journal de Physique III, vol.7, issue.3, pp.491-503, 1997.
DOI : 10.1051/jp3:1997137

URL : https://hal.archives-ouvertes.fr/jpa-00249591

L. Fulcheri and Y. Schwob, Comparison between two carbon nanostructures furnace and acetylene blacks, High Temp Chem. Process, vol.3, pp.575-583, 1994.

T. Gruenberger, J. Gonzalez-aguilar, F. Fabry, L. Fulcheri, E. Grivei et al., Production of Carbon Nanotubes and Other Nanostructures Via Continuous 3???Phase AC Plasma Processing, Fullerenes, Nanotubes and Carbon Nanostructures, vol.12, issue.3, pp.571-581, 2004.
DOI : 10.1016/0022-0248(93)90020-W

URL : https://hal.archives-ouvertes.fr/hal-00528743

H. Okuno, E. Grivei, F. Fabry, T. Gruenberger, J. Gonzalez-aguilar et al., Synthesis of carbon nanotubes and nano-necklaces by thermal plasma process, Carbon, vol.42, issue.12-13, pp.2543-2549, 2004.
DOI : 10.1016/j.carbon.2004.05.037

URL : https://hal.archives-ouvertes.fr/hal-00528754

F. Fabry, Study of a plasma process for the synthesis of carbon black by high temperature hydrocarbons pyrolysis and product characterization, 1999.

B. Ravary, Thermal and Hydrodynamic modelling of a 3-phase plasma reactor, contribution to the development of an industrial process for the production of carbon black, 1998.

B. Ravary, L. Fulcheri, J. A. Bakken, G. Flamant, and F. Fabry, Influence of the Electromagnetic forces on momentum and heat transfer in a 3-Phase AC plasma reactor, Plasma Chemistry and Plasma Processing, vol.19, issue.1, pp.69-89, 1999.
DOI : 10.1023/A:1021855916566

URL : https://hal.archives-ouvertes.fr/hal-00542379

B. Ravary, L. Fulcheri, F. Fabry, and G. Flamant, Analysis of the behavior of the arcs in a three phase AC plasma reactor, Proceedings ISPC-13 (13th international symposium on plasma chemistry), pp.219-225, 1997.
URL : https://hal.archives-ouvertes.fr/hal-00806209

L. Fulcheri, Carbon Nanostructures by plasma Habilitation degree dissertation (HDR) defended on, 2003.

C. Rehmet, Theoretical and experimental study of a 3-phase AC plasma torch associated to a gasification process, pp.MINES-ParisTech, 0196.

C. Rehmet, V. Rohani, F. Cauneau, and L. Fulcheri, 3D Unsteady State MHD Modeling of a 3-Phase AC Hot Graphite Electrodes Plasma Torch, Plasma Chemistry and Plasma Processing, vol.28, issue.2, pp.491-515, 2013.
DOI : 10.1007/s11090-013-9438-8

URL : https://hal.archives-ouvertes.fr/hal-00783778

C. Rehmet, F. Fabry, V. Rohani, F. Cauneau, and L. Fulcheri, A Comparison Between MHD Modeling and Experimental Results in a 3-Phase AC Arc Plasma Torch: Influence of the Electrode Tip Geometry, Plasma Chemistry and Plasma Processing, vol.34, issue.4, pp.975-996, 2014.
DOI : 10.1007/s11090-014-9536-2

URL : https://hal.archives-ouvertes.fr/hal-00960102

C. Rehmet, F. Fabry, V. Rohani, F. Cauneau, and L. Fulcheri, High Speed Video Camera and Electrical Signal Analyses of Arcs Behavior in a 3-Phase AC Arc Plasma Torch, Plasma Chemistry and Plasma Processing, vol.47, issue.1, pp.779-796, 2013.
DOI : 10.1007/s11090-013-9458-4

URL : https://hal.archives-ouvertes.fr/hal-00827317

C. Rehmet, F. Fabry, V. Rohani, F. Cauneau, and L. Fulcheri, Unsteady state analysis of free-burning arcs in a 3-phase AC plasma torch. Comparison between parallel and coplanar configurations, Plasma Sources Science and Technology, pp.65011-65023
URL : https://hal.archives-ouvertes.fr/hal-01086921

S. Takali, Etude théorique d'un électrobruleur industriel dote d'une torche à arc triphasée pour la valorization énergétique de combustibles à faible pouvoir calorifique, pp.MINES-ParisTech, 2015.

W. P. Jones and R. P. Lindstedt, Global reaction schemes for hydrocarbon combustion, Combustion and Flame, vol.73, issue.3, pp.233-249, 1998.
DOI : 10.1016/0010-2180(88)90021-1