W. Bahloul, O. Oddes, V. Bounor-legaré, F. Mélis, P. Cassagnau et al., Reactive extrusion processing of polypropylene/TiO2 nanocomposites by in situ synthesis of the nanofillers: Experiments and modeling, AIChE Journal, vol.20, issue.8, pp.2174-2184, 2011.
DOI : 10.1002/aic.12425
URL : https://hal.archives-ouvertes.fr/hal-00612457

J. M. Barbas, A. V. Machado, and J. A. Covas, Evolution of dispersion along the extruder during the manufacture of polymer???organoclay nanocomposites, Chemical Engineering Science, vol.98, pp.77-87, 2013.
DOI : 10.1016/j.ces.2013.05.004

J. M. Barbas, A. V. Machado, and J. A. Covas, Processing Conditions Effect on Dispersion Evolution in a Twin-Screw Extruder: Polypropylene-Clay Nanocomposites, Chemical Engineering & Technology, vol.21, issue.13
DOI : 10.1002/ceat.201300303

S. V. Canevarolo, Chain scission distribution function for polypropylene degradation during multiple extrusions, Polymer Degradation and Stability, vol.70, issue.1, pp.71-76, 2000.
DOI : 10.1016/S0141-3910(00)00090-2

P. Cassagnau, Melt rheology of organoclay and fumed silica nanocomposites, Polymer, vol.49, issue.9, pp.2183-2196, 2008.
DOI : 10.1016/j.polymer.2007.12.035
URL : https://hal.archives-ouvertes.fr/hal-00373727

J. M. Cervantes-uc, J. V. Cauich-rodriguez, H. Vazquez-torres, L. F. Garfias-mesias, and D. R. Paul, Thermal degradation of commercially available organoclays studied by TGA???FTIR, Thermochimica Acta, vol.457, issue.1-2, pp.92-102, 2007.
DOI : 10.1016/j.tca.2007.03.008

J. W. Cho and D. R. Paul, Nylon 6 nanocomposites by melt compounding, Polymer, vol.42, issue.3, pp.1089-1094, 2001.
DOI : 10.1016/S0032-3861(00)00380-3

L. Cui, D. M. Khramov, C. W. Bielawski, D. L. Hunter, P. J. Yoon et al., Effect of organoclay purity and degradation on nanocomposite performance, Part 1: Surfactant degradation, Polymer, vol.49, issue.17, pp.3751-3761, 2008.
DOI : 10.1016/j.polymer.2008.06.029

W. Lertwimolnun and B. Vergnes, Influence of compatibilizer and processing conditions on the dispersion of nanoclay in a polypropylene matrix, Polymer, vol.46, issue.10, pp.3462-3471, 2005.
DOI : 10.1016/j.polymer.2005.02.018
URL : https://hal.archives-ouvertes.fr/hal-00531180

W. Lertwimolnun and B. Vergnes, Effect of processing conditions on the formation of polypropylene/organoclay nanocomposites in a twin screw extruder, Polymer Engineering & Science, vol.45, issue.653, pp.314-323, 2006.
DOI : 10.1002/pen.20458
URL : https://hal.archives-ouvertes.fr/hal-00514114

W. Lertwimolnun and B. Vergnes, Influence of screw profile and extrusion conditions on the microstructure of polypropylene/organoclay nanocomposites, Polymer Engineering & Science, vol.8, issue.12, pp.2100-2109, 2007.
DOI : 10.1002/pen.20934
URL : https://hal.archives-ouvertes.fr/hal-00509549

B. Lin, A. Thu, H. Heim, G. Scheel, and U. Sundararaj, Nylon 66/clay nanocomposite structure development in a twin screw extruder, Polymer Engineering & Science, vol.41, issue.4, pp.824-834, 2009.
DOI : 10.1002/pen.21327

M. Louizi, V. Massardier, and P. Cassagnau, Contribution of High-shear Processing to the Compatibilization of (PP/EPR)/PE Ternary Blends, Macromolecular Materials and Engineering, vol.1, issue.6, pp.674-688, 2014.
DOI : 10.1002/mame.201300268
URL : https://hal.archives-ouvertes.fr/hal-01086592

J. Massam and T. J. Pinnavaia, Clay Nanolayer Reinforcement of a Glassy Epoxy Polymer, MRS Proceedings, vol.44, pp.223-232, 1998.
DOI : 10.1021/ma961786h

P. Médéric, T. Aubry, and T. Razafinimaro, Structural and Rheological Properties as a Function of Mixing Energy for Polymer/Layered Silicate Nanocomposites, International Polymer Processing, vol.24, issue.3, pp.261-266, 2009.
DOI : 10.3139/217.2247

P. B. Messersmith and E. P. Giannelis, Synthesis and barrier properties of poly(??-caprolactone)-layered silicate nanocomposites, Journal of Polymer Science Part A: Polymer Chemistry, vol.33, issue.7, pp.1047-1057, 1995.
DOI : 10.1002/pola.1995.080330707

M. Modesti, A. Lorenzetti, D. Bon, and S. Besco, Effect of processing conditions on morphology and mechanical properties of compatibilized polypropylene nanocomposites, Polymer, vol.46, issue.23, pp.10237-10245, 2005.
DOI : 10.1016/j.polymer.2005.08.035

M. Modesti, A. Lorenzetti, D. Bon, and S. Besco, Thermal behaviour of compatibilised polypropylene nanocomposite: Effect of processing conditions, Polymer Degradation and Stability, vol.91, issue.4, pp.672-680, 2006.
DOI : 10.1016/j.polymdegradstab.2005.05.018

N. Nassar, L. A. Utracki, and M. R. Kamal, Melt Intercalation in Montmorillonite/Polystyrene Nanocomposites, International Polymer Processing, vol.20, issue.4, pp.423-431, 2005.
DOI : 10.3139/217.2014

P. Peltola, E. Va, J. Vuorinen, S. Syrja, and K. Hanhi, Effect of rotational speed of twin screw extruder on the microstructure and rheological and mechanical properties of nanoclay-reinforced polypropylene nanocomposites, Polymer Engineering & Science, vol.85, issue.8, pp.995-1000, 2006.
DOI : 10.1002/pen.20586

L. Scatteia, P. Scarfato, and D. Acierno, Processing, rheology and structure of melt compounded PBT-clay nanocomposites having different chemical composition, pp.1-15, 2006.
DOI : 10.1515/epoly.2006.6.1.295

R. K. Shah, P. , and D. R. , Organoclay degradation in melt processed polyethylene nanocomposites, Polymer, vol.47, issue.11, pp.4075-4084, 2006.
DOI : 10.1016/j.polymer.2006.02.031

A. Usuki, Y. Kojima, M. Kawasumi, A. Okada, Y. Fukushima et al., Synthesis of nylon 6-clay hybrid, Journal of Materials Research, vol.3, issue.05, pp.1179-1184, 1992.
DOI : 10.1002/pol.1958.1203012108

B. Vergnes, The Use of Apparent Yield Stress to Characterize Exfoliation in Polymer Nanocomposites, International Polymer Processing, vol.26, issue.2, pp.229-232, 2011.
DOI : 10.3139/217.2462
URL : https://hal.archives-ouvertes.fr/hal-00654884

Z. Wang and T. J. Pinnavaia, Nanolayer Reinforcement of Elastomeric Polyurethane, Chemistry of Materials, vol.10, issue.12, pp.3769-3771, 1998.
DOI : 10.1021/cm980448n

K. Yano, A. Usuki, and A. Okada, Synthesis and properties of polyimide-clay hybrid films, Journal of Polymer Science Part A: Polymer Chemistry, vol.35, issue.11, pp.2289-2294, 1997.
DOI : 10.1002/(SICI)1099-0518(199708)35:11<2289::AID-POLA20>3.0.CO;2-9