Additive layer manufacturing of titanium matrix composites using the direct metal deposition laser process

Abstract : Titanium Matrix Composites (TMC's) containing various volume fractions of (TiB+TiC) particles have been deposited from powder feedstocks consisting of a blend of pre-alloyed (Ti-6Al-4V+B4C) powders, using the direct metal deposition (DMD) laser process and the in-situ chemical reaction 5Ti+B4C→4TiB+TiC. Process optimization has allowed to obtain a homogeneous distribution of tiny TiB whiskers within the Ti-6Al-4V α/β matrix, with a full solubilization of C for low B4C contents (0.5 wt% and 1.5 wt%), and the formation of a small amount of globular TiC particles at higher B4C content (3%). Comparisons with Ti-6Al-4V DMD walls revealed a substantial grain refinement on TMC's due to enhanced grain nucleation on TiB whiskers, even for low B4C contents. Last, mechanical investigations indicated an increase of 10–15% of Vickers hardness, and a constant 10% increase of Young modulus on a large temperature range (20–600 °C) for all B4C content.
Type de document :
Article dans une revue
Liste complète des métadonnées

https://hal-mines-paristech.archives-ouvertes.fr/hal-01421952
Contributeur : Bibliothèque Umr7633 <>
Soumis le : vendredi 23 décembre 2016 - 12:07:15
Dernière modification le : mercredi 12 juin 2019 - 17:01:40

Lien texte intégral

Identifiants

Citation

Sébastien Pouzet, P. Peyre, Cyril Gorny, Olivier Castelnau, Thierry Baudin, et al.. Additive layer manufacturing of titanium matrix composites using the direct metal deposition laser process. Materials Science and Engineering: A, Elsevier, 2016, 677, pp.171-181. ⟨10.1016/j.msea.2016.09.002⟩. ⟨hal-01421952⟩

Partager

Métriques

Consultations de la notice

320