Modeling of dynamic recrystallization in austenitic stainless steel 304L by coupling a full field approach in a finite element framework with mean field laws

Abstract : Mean field (MF) models of dynamic recrystallization (DRX) emerged in the last decades with the intention to implicitly describe the microstructure by considering grains sets as spherical classes. These models have the advantage to provide accurate results in terms of macroscopic results such as recrystallized fraction or grain size but also to provide additional information in terms of grain size distribution and dislocation density distribution [1,2,3,4]. In parallel, finer approaches called full field (FF) models have emerged in the last decades. These approaches consider a complete description of the microstructure topology at the polycrystal scale [5]. A review of the most significant numerical methods can be found in [6].Several DRX models based on a full field approach can already be found in the literature [7,8,9]. Although literature already provides a large number of papers on full-field DRX models, major drawbacks are either they are developed in 2D and/or they only consider small deformations (< 20%). In the present work, a 3D model based on the level-set method in a FE framework is employed to model the DRX phenomenon in austenitic stainless steel 304L at large deformations. The level-set approach coupled to a remesher provides an accurate tracking of interfaces (i.e. grain boundaries) all along the simulation while mean field laws are used for the nucleation and work hardening mechanisms. A first part of this work is dedicated to a presentation of the level-set approach and the constitutive equations of this model. That part is followed by a sensibility study concerning the choice of the initial number of grains and elements so that the model correctly describes experimental results on 304L. The subsequent part presents a comparison between an enriched DRX mean field models [2] and experimental results. Some remarks about the choice of use either a mean field or full field model will conclude this work. References : [1] Montheillet, F., Lurdos, O., and Damamme, G. (2009). Acta Materialia, 57(5):1602–1612. [2] Bernard, P., Bag, S., Huang, K., and Logé, R. (2011). Science and Engineering: A, 528(24):7357– 7367. [3] Cram, D. G., Zurob, H. S., Brechet, Y. J. M., and Hutchinson, C. R. (2009). Acta Materialia, 57(17):5218–5228. [4] Maire, L., Moussa, C., Bozzolo, N., Scholtes, B., Pino Muñoz, D., Bernacki, M. (2016). Journal of Materials Science, 51(24):10970-10981.[5] Scholtes, B., Shakoor, M., Settefrati, A., Bouchard, P.-O., Bozzolo, N., and Bernacki, M. (2015). Computational Materials Science, 109:388–398. [6] Hallberg, H. (2011). Metals, 1(1):16–48. [7] Mellbin, Y., Hallberg, H., and Ristinmaa, M. (2015). Modelling and Simulation in Materials Science and Engineering, 23(4):045011. [8] Sitko, M., Pietrzyk, M., and Madej, L. (2016). Journal of Computational Science, 16:98–113. [9] Zhao, P., Song En Low, T., Wang, Y., and Niezgoda, S. R. (2016). International Journal of Plasticity, 80:38–55.
Type de document :
Communication dans un congrès
2017 MRS Spring Meeting & Exhibit, Apr 2017, Phoenix, United States
Liste complète des métadonnées

https://hal-mines-paristech.archives-ouvertes.fr/hal-01507114
Contributeur : Brigitte Hanot <>
Soumis le : mercredi 12 avril 2017 - 15:38:20
Dernière modification le : mardi 27 mars 2018 - 16:06:17

Identifiants

  • HAL Id : hal-01507114, version 1

Collections

Citation

Ludovic Maire, Charbel Moussa, Nathalie Bozzolo, Marc Bernacki. Modeling of dynamic recrystallization in austenitic stainless steel 304L by coupling a full field approach in a finite element framework with mean field laws. 2017 MRS Spring Meeting & Exhibit, Apr 2017, Phoenix, United States. 〈hal-01507114〉

Partager

Métriques

Consultations de la notice

115