A. Gurson, Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I???Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, issue.1, pp.2-15, 1977.
DOI : 10.1115/1.3443401

V. Tvergaard and A. Needleman, Analysis of the cup-cone fracture in a round tensile bar, Acta Metallurgica, vol.32, issue.1, pp.157-169, 1984.
DOI : 10.1016/0001-6160(84)90213-X

J. Lemaitre, A Course on Damage Mechanics, 1992.
DOI : 10.1007/978-3-642-18255-6

J. Faleskog and I. Barsoum, Tension???torsion fracture experiments???Part I: Experiments and a procedure to evaluate the equivalent plastic strain, International Journal of Solids and Structures, vol.50, issue.25-26, pp.25-264241, 2013.
DOI : 10.1016/j.ijsolstr.2013.08.029

J. Papasidero, V. Doquet, and D. Mohr, Determination of the Effect of Stress State on the Onset of Ductile Fracture Through Tension-Torsion Experiments, Experimental Mechanics, vol.26, issue.3, pp.13-151, 2014.
DOI : 10.1007/s11340-013-9788-4

URL : https://hal.archives-ouvertes.fr/hal-00958597

E. Mahgoub, X. Deng, and M. Sutton, Three-dimensional stress and deformation fields around flat and slant cracks under remote Mode I loading conditions, Engineering Fracture Mechanics, vol.70, issue.18, pp.2527-2542, 2003.
DOI : 10.1016/S0013-7944(03)00082-1

F. Bron, J. Besson, and A. Pineau, Ductile rupture in thin sheets of two grades of 2024 aluminum alloy, Materials Science and Engineering: A, vol.380, issue.1-2, pp.356-364, 2004.
DOI : 10.1016/j.msea.2004.04.008

URL : https://hal.archives-ouvertes.fr/hal-00144979

A. Asserin-lebert, J. Besson, and A. Gourgues, Fracture of 6056 aluminum sheet materials: effect of specimen thickness and hardening behavior on strain localization and toughness, Materials Science and Engineering: A, vol.395, issue.1-2, pp.186-194, 2005.
DOI : 10.1016/j.msea.2004.12.018

URL : https://hal.archives-ouvertes.fr/hal-00151590

W. Lan, X. Deng, M. Sutton, and C. Chen, Study of slant fracture in ductile materials, International Journal of Fracture, vol.63, issue.3-4, pp.469-496, 2006.
DOI : 10.1007/s10704-006-9008-7

T. Morgeneyer, L. Helfen, I. Sinclair, H. Proudhon, F. Xu et al., Ductile crack initiation and propagation assessed via in situ synchrotron radiation-computed laminography, Scripta Materialia, vol.65, issue.11, pp.1010-1013, 2011.
DOI : 10.1016/j.scriptamat.2011.09.005

URL : https://hal.archives-ouvertes.fr/hal-00652978

J. Besson, C. Mccowan, and E. Drexler, Modeling flat to slant fracture transition using the computational cell methodology, Engineering Fracture Mechanics, vol.104, pp.80-95, 2013.
DOI : 10.1016/j.engfracmech.2013.02.032

URL : https://hal.archives-ouvertes.fr/hal-00830626

F. Bron and J. Besson, Simulation of the ductile tearing for two grades of 2024 aluminum alloy thin sheets, Engineering Fracture Mechanics, vol.73, issue.11, pp.1531-1552, 2006.
DOI : 10.1016/j.engfracmech.2006.01.024

URL : https://hal.archives-ouvertes.fr/hal-00136710

A. Buljac, T. Taillandier-thomas, T. Morgeneyer, L. Helfen, S. Roux et al., Slant strained band development during flat to slant crack transition in AA 2198 T8 sheet: in situ 3D measurements, International Journal of Fracture, vol.20, issue.1, pp.49-62, 2016.
DOI : 10.1007/s10704-015-0052-z

URL : https://hal.archives-ouvertes.fr/hal-01385406

A. Needleman and V. Tvergaard, Analyses of Plastic Flow Localization in Metals, Applied Mechanics Reviews, vol.45, issue.3S, pp.3-18, 1992.
DOI : 10.1115/1.3121390

E. Maire and P. Withers, Quantitative X-ray tomography, International Materials Reviews, vol.42, issue.3, pp.1-43, 2014.
DOI : 10.1016/j.jnucmat.2011.03.051

URL : https://hal.archives-ouvertes.fr/hal-00985576

V. Altapova, L. Helfen, A. Myagotin, D. Hänschke, J. Moosmann et al., Phase contrast laminography based on Talbot interferometry, Optics Express, vol.20, issue.6, pp.6496-6508, 2012.
DOI : 10.1364/OE.20.006496

URL : http://digbib.ubka.uni-karlsruhe.de/volltexte/documents/3056702

L. Helfen, T. Baumbach, P. Mikulík, D. Kiel, P. Pernot et al., High-resolution three-dimensional imaging of flat objects by synchrotron-radiation computed laminography, Applied Physics Letters, vol.190, issue.7, p.71915, 2005.
DOI : 10.1118/1.1350588

L. Helfen, T. Baumbach, P. Cloetens, and J. Baruchel, Phase-contrast and holographic computed laminography, Applied Physics Letters, vol.94, issue.10, p.104103, 2009.
DOI : 10.1364/OE.16.005141

S. Roux, F. Hild, P. Viot, and D. Bernard, Three-dimensional image correlation from X-ray computed tomography of solid foam, Composites Part A: Applied Science and Manufacturing, vol.39, issue.8, pp.1253-1265, 2008.
DOI : 10.1016/j.compositesa.2007.11.011

URL : https://hal.archives-ouvertes.fr/hal-01006730

T. Morgeneyer, L. Helfen, H. Mubarak, and F. Hild, 3D Digital Volume Correlation of Synchrotron Radiation Laminography Images of Ductile Crack Initiation: An Initial Feasibility Study, Experimental Mechanics, vol.51, issue.4, pp.543-556, 2013.
DOI : 10.1007/s11340-012-9660-y

URL : https://hal.archives-ouvertes.fr/hal-00848726

T. Morgeneyer, T. Taillandier-thomas, L. Helfen, T. Baumbach, I. Sinclair et al., In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet, Acta Materialia, vol.69, pp.78-91, 2014.
DOI : 10.1016/j.actamat.2014.01.033

URL : https://hal.archives-ouvertes.fr/hal-00952176

T. Morgeneyer, M. Starink, and I. Sinclair, Evolution of voids during ductile crack propagation in an aluminium alloy sheet toughness test studied by synchrotron radiation computed tomography, Acta Materialia, vol.56, issue.8, pp.1671-1679, 2008.
DOI : 10.1016/j.actamat.2007.12.019

T. Morgeneyer, J. Besson, H. Proudhon, M. Starink, and I. Sinclair, Experimental and numerical analysis of toughness anisotropy in AA2139 Al-alloy sheet, Acta Materialia, vol.57, issue.13, pp.3902-3915, 2009.
DOI : 10.1016/j.actamat.2009.04.046

URL : https://hal.archives-ouvertes.fr/hal-00413654

L. Helfen, A. Myagotin, P. Pernot, M. Dimichiel, P. Mikulík et al., Investigation of hybrid pixel detector arrays by synchrotron-radiation imaging, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.563, issue.1, pp.163-166, 2006.
DOI : 10.1016/j.nima.2006.01.085

V. Maurel, L. Helfen, N. Guyen, F. Köster, A. Dimichiel et al., Three-dimensional investigation of thermal barrier coatings by synchrotron-radiation computed laminography, Scripta Materialia, vol.66, issue.7, pp.471-474, 2012.
DOI : 10.1016/j.scriptamat.2011.12.021

URL : https://hal.archives-ouvertes.fr/hal-00683883

D. Bull, L. Helfen, I. Sinclair, S. Spearing, and T. Baumbach, A comparison of multi-scale 3D X-ray tomographic inspection techniques for assessing carbon fibre composite impact damage, Composites Science and Technology, vol.75, pp.55-61, 2013.
DOI : 10.1016/j.compscitech.2012.12.006

P. Reischig, L. Helfen, A. Wallert, T. Baumbach, and J. Dik, High-resolution non-invasive 3D imaging of paint microstructure by synchrotron-based X-ray laminography, Applied Physics A, vol.53, issue.4, pp.983-995, 2013.
DOI : 10.1007/s00339-013-7687-2

A. Myagotin, A. Voropaev, L. Helfen, D. Hänschke, and T. Baumbach, Efficient Volume Reconstruction for Parallel-Beam Computed Laminography by Filtered Backprojection on Multi-Core Clusters, IEEE Transactions on Image Processing, vol.22, issue.12, pp.5348-5361, 2013.
DOI : 10.1109/TIP.2013.2285600

G. Besnard, F. Hild, and S. Roux, ???Finite-Element??? Displacement Fields Analysis from Digital Images: Application to Portevin???Le Ch??telier Bands, Experimental Mechanics, vol.404, issue.3, pp.789-803, 2006.
DOI : 10.1007/s11340-006-9824-8

URL : https://hal.archives-ouvertes.fr/hal-00124513/file/EM2-ccsd.pdf

F. Hild and S. Roux, Comparison of Local and Global Approaches to Digital Image Correlation, Experimental Mechanics, vol.39, issue.8, pp.1503-1519, 2012.
DOI : 10.1007/s11340-012-9603-7

URL : https://hal.archives-ouvertes.fr/hal-00750756

F. Xu, L. Helfen, T. Baumbach, and H. Suhonen, Comparison of image quality in computed laminography and tomography, Optics Express, vol.20, issue.2, pp.794-806, 2012.
DOI : 10.1364/OE.20.000794

H. Leclerc, J. Périé, S. Roux, and F. Hild, Voxel-Scale Digital Volume Correlation, Experimental Mechanics, vol.22, issue.9, pp.479-490, 2011.
DOI : 10.1007/s11340-010-9407-6

URL : https://hal.archives-ouvertes.fr/hal-00521193

J. Réthoré, J. Tinnes, S. Roux, J. Buffì-ere, and F. Hild, Extended three-dimensional digital image correlation (X3D-DIC), Comptes Rendus M??canique, vol.336, issue.8, pp.643-649, 2008.
DOI : 10.1016/j.crme.2008.06.006

A. Bouterf, S. Roux, F. Hild, A. J. Maire, E. Meille et al., Digital Volume Correlation Applied to X-ray Tomography Images from Spherical Indentation Tests on Lightweight Gypsum, Strain, vol.196, issue.2, pp.444-453, 2014.
DOI : 10.1111/str.12101

URL : https://hal.archives-ouvertes.fr/hal-01068402

A. Needleman and J. Rice, Limits to Ductility Set by Plastic Flow Localization, pp.237-267, 1977.
DOI : 10.1007/978-1-4613-2880-3_10

T. Morgeneyer, T. Taillandier-thomas, A. Buljac, L. Helfen, and F. Hild, On strain and damage interactions during tearing: 3D in situ measurements and simulations for a ductile alloy (AA2139-T3), Journal of the Mechanics and Physics of Solids, vol.96, pp.550-571, 2016.
DOI : 10.1016/j.jmps.2016.07.012

URL : https://hal.archives-ouvertes.fr/hal-01383922