U. J. Aarsnes, O. M. Aamo, and E. Hauge, Limits of Controller Performance in the Heave Disturbance Attenuation Problem, Control Conf. (ECC), pp.1071-1076, 2013.

U. J. Aarsnes, F. Di-meglio, and O. M. Aamo, Fit-for-Purpose Modeling for Automation of Underbalanced Drilling Operations. Presented at the SPE/IADC Managed Pressure Drilling and Underbalanced Operations Conference and Exhibition, pp.8-9, 2014.

,

U. J. Aarsnes, F. Di-meglio, and S. Evje, Control-Oriented Drift-Flux Modeling of Single-and Two-Phase Flow for Drilling, ASME Dyn. Syst. Control Conf., page V003T37A003, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01499936

U. J. Aarsnes, M. S. Gleditsch, and O. M. Aamo, Modeling and Avoidance of Heave-Induced Resonances in Offshore Drilling, SPE-173178-PA, vol.29, pp.454-464, 2014.

K. J. Å-ström and R. M. Murray, Feedback Systems: An Introduction for Scientists and Engineers, 2010.

F. Di-meglio, Dynamics and Control of Slugging in Oil Production, 2011.
URL : https://hal.archives-ouvertes.fr/pastel-00617949

G. O. Eikrem, O. M. Aamo, and B. Foss, Stabilization of Gas-Distribution Instability in Single-Point Dual Gas Lift Wells, SPE-97731-PA, vol.21, pp.252-259, 2006.

G. O. Eikrem, O. M. Aamo, and B. Foss, On Instability in Gas Lift Wells and Schemes for Stabilization by Automatic Control, SPE Prod & Oper, vol.23, issue.2, 2008.

S. Evje and K. K. Fjelde, Hybrid Flux-Splitting Schemes for a Two-Phase Flow Model, J. Comput. Phys, vol.175, issue.2, pp.674-701, 2002.

S. Evje, Weak Solutions for a Gas-Liquid Model Relevant for Describing Gas-Kick in Oil Wells, SIAM J. Math. Anal, vol.43, issue.4, pp.1887-1922, 2011.

K. K. Fjelde, R. Rommetveit, and A. Merlo, Improvements in Dynamic Modeling of Underbalanced Drilling. Presented at the IADC/ SPE Underbalanced Technology Conference and Exhibition, March. SPE-81636-MS, pp.25-26, 2003.

J. Godhavn, Control Requirements for Automatic Managed Pressure Drilling System, SPE Drill Compl, vol.25, issue.3, pp.336-345, 2010.

J. Godhavn, Drilling Seeking Automatic Control Solutions, 18th IFAC World, pp.10842-10850, 2011.

R. A. Graham and M. S. Culen, Methodology for Manipulation of Wellhead Pressure Control for the Purpose of Recovering Gas To Process in Underbalanced Drilling Applications. Presented at the SPE/ IADC Underbalanced Technology Conference and Exhibition, Houston, October. SPE-91220-MS, pp.11-12, 2004.

B. Guo, Balance Between Formation Damage and Wellbore Damage: What Is the Controlling Factor in UBD Operations?, Presented at the International Symposium and Exhibition on Formation Damage Control, pp.20-21, 2002.

B. Guo and A. Ghalambor, An Innovation in Designing Underbalanced Drilling Flow Rates: A Gas-Liquid Rate Window (GLRW) Approach. Presented at the IADC/SPE Asia Pacific Drilling Technology, 2002.

B. Hu, Characterizing Gas-Lift Instabilities, 2004.

M. Ishii, One-dimensional drift-flux model and constitutive equations for relative motion between phases in various two-phase flow regimes, 1977.

F. Jansen, O. Shoham, and Y. Taitel, The Elimination of Severe Slugging Experiments and Modeling, Int. J. Multiph. Flow, vol.22, issue.6, pp.1055-1072, 1996.

H. K. Khalil, Nonlinear Systems, 2002.

M. Krstic, J. Protz, and J. Paduano, Backstepping Designs for Jet Engine Stall and Surge Control, 34th IEEE Conf. Decision Control, vol.3, pp.3049-3055, 1995.

A. Lage, K. Fjelde, and R. Time, Underbalanced Drilling Dynamics: Two-Phase Flow Modeling and Experiments, Proc., IADC/SPE Asia Pacific Drill, vol.8, pp.61-70, 2000.

A. Lage and R. Time, An Experimental and Theoretical Investigation of Upward Two-Phase Flow in Annuli, SPE J, vol.7, issue.3, 2002.

C. Mykytiw, I. Davidson, and P. Frink, Design and Operational Considerations to Maintain Underbalanced Conditions With Concentric Casing Injection. Presented at the IADC/SPE Underbalanced Technology Conference and Exhibition, March. SPE-81631-MS, pp.25-26, 2003.

C. Mykytiw, P. Suryanarayana, and P. Brand, Practical Use of a Multiphase Flow Simulator for Underbalanced Drilling Applications Design-The Tricks of the Trade. Presented at the SPE/IADC Underbalanced Technology Conference and Exhibition, October. SPE-91598-MS, pp.11-12, 2004.

C. Nguyen, J. Somerville, and B. Smart, Predicting the Production Capacity During Underbalanced-Drilling Operations in Vietnam. Presented at the IADC/SPE Managed Pressure. Drilling and Underbalanced Operations Conference and Exhibition, pp.12-13, 2009.

,

R. Pickles, P. Brand, and P. Savage, Utilization of Underbalanced Drilling Techniques to Exploit a Low-Pressure Reservoir in Indonesia. Presented at the SPE/IADC Underbalanced Technology Conference and Exhibition, October. SPE-91591-MS, pp.11-12, 2004.

J. Saponja, Challenges With Jointed-Pipe Underbalanced Operations, SPE Drill & Compl, vol.13, issue.2, pp.121-128, 1998.

H. Shi, J. Holmes, and L. Durlofsky, Drift-Flux Modeling of Two-Phase Flow in Wellbores, SPE J, vol.10, issue.1, 2005.

L. Sinegre, Dynamic Study of Unstable Phenomena Stepping in Gas-Lift Activated Systems, 2006.

P. Suryanarayana, B. E. Smith, and A. K. Hasan, Basis of Design for Coiled-Tubing Underbalanced Through-Tubing Drilling in the Sajaa Field, SPE Drill Compl, vol.21, issue.2, 2006.

Y. Taitel, Stability of Severe Slugging, Int. J. Multiph. Flow, vol.12, issue.2, pp.90026-90027, 1986.

J. Thorogood, W. D. Aldred, and F. Florence, Drilling Automation: Technologies, Terminology, and Parallels With Other Industries, SPE Drill Compl, vol.25, issue.4, 2010.

J. E. Udegbunam, K. K. Fjelde, and O. Y. Arild, Uncertainty-Based Approach for Predicting the Operating Window in UBO Well Design, SPE-164916-PA, vol.28, pp.326-337, 2013.

J. E. Udegbunam, K. K. Fjelde, and S. Evje, Presented at the SPE/IADC Managed Pressure Drilling & Underbalanced Operations Conference & Exhibition, SPE-168960-MS, 2014.

G. B. Wallis, One-Dimensional Two-Phase Flow, 1969.

M. Wiggins, J. Russell, J. , and J. , Analytical Development of Vogel-Type Inflow Performance Relationships, SPE J, vol.1, issue.4, 1996.

Z. G. Xu and M. Golan, Criteria for Operation Stability of Gas-Lift Wells. (unsolicited). SPE-19362-PA, 1989.