A. Sawatzky, G. A. Ledoux, and S. Jones, Oxidation of zirconium during a hightemperature transient Zirconium in the Nuclear Industry, ASTM STP 633, pp.134-149, 1977.

H. M. Chung, A. M. Garde, and T. F. Kassner, Development of an Oxygen Embrittlement Criterion for Zircaloy Cladding Applicable to Loss-of-Coolant Accident Conditions in Light-Water Reactors, Zirconium in the Nuclear Industry (Fourth Conference), ASTM STP 681, pp.600-627, 1979.
DOI : 10.1520/STP36703S

J. C. Brachet, V. Vandenberghe-maillot, L. Portier, D. Gilbon, A. Lesbros et al., Hydrogen Content, Preoxidation, and Cooling Scenario Effects on Post-Quench Microstructure and Mechanical Properties of Zircaloy-4 and M5?? Alloys in LOCA Conditions, Journal of ASTM International, vol.5, 2008.
DOI : 10.1520/STP48132S

O. T. Woo and K. Tangri, Transformation characteristics of rapidly heated and quenched zircaloy-4-oxygen alloys, Journal of Nuclear Materials, vol.79, issue.1, pp.83-94, 1979.
DOI : 10.1016/0022-3115(79)90435-5

S. Leistikow and G. Schanz, Oxidation kinetics and related phenomena of zircaloy-4 fuel cladding exposed to high temperature steam and hydrogen-steam mixtures under PWR accident conditions, Nuclear Engineering and Design, vol.103, issue.1, pp.65-84, 1987.
DOI : 10.1016/0029-5493(87)90286-X

F. J. Erbarcher, H. J. Neitzel, H. E. Rosinger, H. Schmidt, and K. Wiehr, Burst Criterion of Zircaloy Fuel Claddings in a Loss-of-Coolant Accident, Zirconium in the Nuclear Industry: Fifth Conference, ASTM STP 754, D.G. Frankin, pp.271-283, 1982.

L. R. Bunnell, J. L. Bates, and G. B. Mellinger, Some high-temperature properties of Zircaloy-oxygen alloys, Journal of Nuclear Materials, vol.116, issue.2-3, pp.219-232, 1983.
DOI : 10.1016/0022-3115(83)90106-X

A. Sawatzky, A Proposed Criterion for the Oxygen Embrittlement of Zircaloy-4 Fuel Cladding, Zirconium in the Nuclear Industry (Fourth Conference), ASTM STP 681, American Society for Testing and Materials, pp.479-496, 1979.
DOI : 10.1520/STP36697S

A. S. Rizkalla, R. A. Holt, and J. J. Jonas, Effect of Oxygen on the Deformation of Zircaloy-2 at Elevated Temperatures, Zirconium in the Nuclear Industry (Fourth Conference), ASTM STP 681, pp.497-513, 1979.
DOI : 10.1520/STP36698S

B. Burton, A. T. Donaldson, and G. L. Reynolds, Interaction of Oxidation and Creep in Zircaloy-2, Zirconium in the Nuclear Industry (Fourth Conference), ASTM STP 681, American Society for Testing and Materials, pp.561-585, 1979.
DOI : 10.1520/STP36701S

R. Choubey, J. J. Jonas, R. A. Holt, and C. E. Ells, Flow stress of oxygen-enriched Zircaloy-2 between 1023 and 1873 K, " Zirconium in the Nuclear Industry: Fifth Conference, pp.350-369, 1982.

C. K. Chow, H. E. Rosinger, and P. C. Bera, Creep behaviour of oxidized Zircaloy-4 fuel sheathing, Proceedings of the Materials in Nuclear Energy Conference, pp.112-116, 1982.

D. Tseng and K. Tangri, Deformation Behavior of Duplex Zircaloy-4-Oxygen Alloys, Metallurgical Transactions A, vol.27, issue.6, pp.1077-1082, 1982.
DOI : 10.1007/BF02659924

A. Stern, J. C. Brachet, V. Maillot, D. Hamon, F. Barcelo et al., Investigations of the Microstructure and Mechanical Properties of Prior-?? Structure as a Function of the Oxygen Content in Two Zirconium Alloys, Journal of ASTM International, vol.5, issue.4, pp.101119-71, 2009.
DOI : 10.1520/JAI101119
URL : https://hal.archives-ouvertes.fr/hal-00488994

P. Bossis, D. Pêcheur, K. Hanifi, J. Thomazet, and M. Blat, Comparison of the High Burn-up Corrosion on M5 and Low Tin Zircaloy-4, Journal of ASTM International, vol.3, issue.1, pp.494-525, 2008.

J. P. Mardon, G. Garner, and P. B. Hoffmann, M5® a Breakthrough in Zr Alloy, Proceedings of the International Topical Meeting on Light Water Reactor Fuel Performance, pp.577-586, 2010.

S. Leistikow and G. Schanz, Oxidation kinetics and related phenomena of zircaloy-4 fuel cladding exposed to high temperature steam and hydrogen-steam mixtures under PWR accident conditions, Nuclear Engineering and Design, vol.103, issue.1, pp.65-84, 1987.
DOI : 10.1016/0029-5493(87)90286-X

L. Portier, T. Bredel, J. C. Brachet, V. Maillot, J. P. Mardon et al., Influence of Long Service Exposures on the Thermal-Mechanical Behaviour of Zy-4 and M5 Alloys in LOCA Conditions, Journal of ASTM International, vol.2, issue.2, 2005.

J. H. Baek and Y. H. Jeong, Breakaway phenomenon of Zr-based alloys during a high-temperature oxidation, Journal of Nuclear Materials, vol.372, issue.2-3, pp.152-159, 2008.
DOI : 10.1016/j.jnucmat.2007.02.011

V. Vandenberghe, J. C. Brachet, L. Saux, M. Gilbon, D. Mardon et al., Sensitivity to chemical composition variations and heating/oxidation mode of the breakaway oxidation in M5® cladding steam oxidized at 1000°C (LOCA conditions), Proceedings of TopFuel 2012, 2012.

H. Uetsuka, T. Furuta, and S. Kawasaki, Failure-Bearing Capability of Oxidized Zircaloy-4 Cladding under Simulated Loss-of-Coolant Condition, Journal of Nuclear Science and Technology, vol.19, issue.2, pp.941-950, 1983.
DOI : 10.1080/18811248.1982.9734128

M. Billone, Y. Yan, T. Burtseva, and R. Daum, Cladding Embrittlement during Postulated Loss-of-Coolant Accidents, p.6967, 2008.
DOI : 10.2172/946677
URL : https://digital.library.unt.edu/ark:/67531/metadc901576/m2/1/high_res_d/946677.pdf

F. Nagase and T. Fuketa, Behavior of Pre-hydrided Zircaloy-4 Cladding under Simulated LOCA Conditions, Journal of Nuclear Science and Technology, vol.19, issue.2, pp.209-218, 2005.
DOI : 10.1080/18811248.1982.9734128

J. Stuckert, M. Große, C. Rössger, M. Klimenkov, M. Steinbrück et al., QUENCH-LOCA program at KIT on secondary hydriding and results of the commissioning bundle test QUENCH-L0, Nuclear Engineering and Design, vol.255, pp.185-201, 2013.
DOI : 10.1016/j.nucengdes.2012.10.024

T. Furuta and S. Kawasaki, Reaction behavior of zircaloy-4 in steam-hydrogen mixtures at high temperature, Journal of Nuclear Materials, vol.105, issue.2-3, pp.119-131, 1982.
DOI : 10.1016/0022-3115(82)90366-X

M. S. Veshchunov and V. E. Shestak, Modeling of Zr alloy burst cladding internal oxidation and secondary hydriding under LOCA conditions, Journal of Nuclear Materials, vol.461, pp.129-142, 2015.
DOI : 10.1016/j.jnucmat.2015.03.006

M. Große, J. Stuckert, M. Steinbrück, and A. Kaestner, Secondary hydriding during LOCA ??? Results from the QUENCH-L0 test, Journal of Nuclear Materials, vol.420, issue.1-3, pp.575-582, 2012.
DOI : 10.1016/j.jnucmat.2011.11.045

C. Raepsaet, P. Bossis, D. Hamon, J. L. Béchade, and J. C. Brachet, Quantification and local distribution of hydrogen within Zircaloy-4 PWR nuclear fuel cladding tubes at the nuclear microprobe of the Pierre S??e Laboratory from ??-ERDA, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol.266, issue.10, pp.2424-2428, 2008.
DOI : 10.1016/j.nimb.2008.03.041

J. C. Brachet, D. Hamon, and C. Raepsaet, Capability of EPMA and µ-ERDA to quantify the micro-chemical partitioning within nuclear fuel cladding materials after a LOCA transient, 2012.

F. Nagase and T. Fuketa, Effect of Pre-Hydriding on Thermal Shock Resistance of Zircaloy-4 Cladding under Simulated Loss-of-Coolant Accident Conditions, Journal of Nuclear Science and Technology, vol.105, issue.4, pp.723-730, 2004.
DOI : 10.1080/18811248.1982.9734128

J. Desquines, D. Drouan, S. Guilbert, and P. Lacote, Embrittlement of pre-hydrided Zircaloy-4 by steam oxidation under simulated LOCA transients, Journal of Nuclear Materials, vol.469, pp.20-31, 2016.
DOI : 10.1016/j.jnucmat.2015.11.008

H. K. Yueh, R. J. Comstock, B. , D. , L. Saux et al., Loss of Coolant Accident Testing Round Robin, Proceedings of the LWR Fuel Performance Meeting, 2013.

L. Saux, M. Brachet, J. C. Vandenberghe, V. Gilbon, D. Mardon et al., Influence of Pre-Transient Oxide on LOCA High Temperature Steam Oxidation and Post- Quench Mechanical Properties of Zircaloy-4 and M5? cladding, Proceedings of the 2011 Water Reactor Fuel Performance Meeting, 2011.

B. Mazères, C. Desgranges, C. Toffolon-masclet, and D. Monceau, Contribution to Modeling of Hydrogen Effect on Oxygen Diffusion in Zy-4 Alloy During High Temperature Steam Oxidation, Oxidation of Metals, vol.172, issue.1-2, pp.121-133, 2013.
DOI : 10.4028/www.scientific.net/SSP.172-174.753

M. Négyesi, J. Burda, O. Bláhová, S. Linhart, and V. Vrtílková, The influence of hydrogen on oxygen distribution inside Zry-4 fuel cladding, Journal of Nuclear Materials, vol.416, issue.3, pp.288-292, 2011.
DOI : 10.1016/j.jnucmat.2011.06.013

A. Pshenichnikov, J. Stuckert, and M. Walter, Microstructure and mechanical properties of Zircaloy-4 cladding hydrogenated at temperatures typical for loss-of-coolant accident (LOCA) conditions, Nuclear Engineering and Design, vol.283, pp.33-39, 2015.
DOI : 10.1016/j.nucengdes.2014.06.022

R. Chosson, A. F. Gourgues, V. Vandenberghe, J. C. Brachet, and J. Crépin, Creep flow and fracture behavior of the oxygen-enriched alpha phase in zirconium alloys, Scripta Materialia, vol.117, pp.20-23, 2016.
DOI : 10.1016/j.scriptamat.2016.02.021
URL : https://hal.archives-ouvertes.fr/hal-01288691

T. Forgeron, J. C. Brachet, F. Barcelo, A. Castaing, J. Hivroz et al., Experiment and Modeling of Advanced Fuel Rod Cladding Behavior Under LOCA Conditions: Alpha-Beta Phase Transformation Kinetics and EDGAR Methodology, Proceedings of the 12th International Symposium on Zirconium in the Nuclear Industry, ASTM STP 1354, pp.256-278, 2000.
DOI : 10.1520/STP14303S

L. Saux, M. Vandenberghe, V. Crébier, P. Brachet, J. C. Gilbon et al., Influence of steam pressure on the high temperature oxidation and post-cooling mechanical properties of Zircaloy-4 and M5? cladding (LOCA conditions), Zirconium in the Nuclear Industry: 17th International Symposium, STP 1543, pp.1002-1053

D. Kaddour, S. Frechinet, A. F. Gourgues, J. C. Brachet, L. Portier et al., Experimental determination of creep properties of Zirconium alloys together with phase transformation, Scripta Materialia, vol.51, issue.6, pp.515-519, 2004.
DOI : 10.1016/j.scriptamat.2004.05.046
URL : https://hal.archives-ouvertes.fr/hal-00166052

D. Kaddour, A. F. Gourgues-lorenzon, J. C. Brachet, P. Portier, and A. Pineau, Microstructural influence on high temperature creep flow of Zr???1%NbO alloy in near-??, (??+??), and ?? temperature ranges in a high vacuum environment, Journal of Nuclear Materials, vol.408, issue.1, pp.116-124, 2011.
DOI : 10.1016/j.jnucmat.2010.11.025
URL : https://hal.archives-ouvertes.fr/hal-00553181

N. Dupin, I. Ansara, C. Servant, C. Toffolon, C. Lemaignan et al., A thermodynamic database for zirconium alloys, Journal of Nuclear Materials, vol.275, issue.3, pp.287-295, 1999.
DOI : 10.1016/S0022-3115(99)00125-7

C. Toffolon, T. Guilbert, and J. C. Brachet, Study of secondary intermetallic phase precipitation/dissolution in Zr alloys by high temperature???high sensitivity calorimetry, Journal of Nuclear Materials, vol.372, issue.2-3, pp.367-378, 2008.
DOI : 10.1016/j.jnucmat.2007.04.042

R. Chosson, Creep behavior under internal pressure of zirconium alloy cladding oxidized in steam at high temperature, Mines ParisTech, 2014.
URL : https://hal.archives-ouvertes.fr/tel-01314559

G. Trego, High temperature creep behavior in the (?+?) phase temperature range of M5® alloy, 2011.
URL : https://hal.archives-ouvertes.fr/pastel-00688207

A. T. Donaldson and H. E. Evans, Oxidation-induced creep in Zircaloy-2, Journal of Nuclear Materials, vol.99, issue.1, pp.47-56, 1981.
DOI : 10.1016/0022-3115(81)90137-9

R. L. Coble, A Model for Boundary Diffusion Controlled Creep in Polycrystalline Materials, Journal of Applied Physics, vol.34, issue.6, pp.1679-1682, 1963.
DOI : 10.1039/tf9605600697

C. Herring, Diffusional Viscosity of a Polycrystalline Solid, Journal of Applied Physics, vol.16, issue.5, pp.437-445, 1950.
DOI : 10.1098/rspa.1936.0158

J. Novotný, J. Fiala, and J. Cadek, Harper-Dorn creep in alpha-zirconium, Acta Metallurgica, vol.33, issue.5, pp.905-911, 1985.
DOI : 10.1016/0001-6160(85)90115-4

A. Garde, H. M. Chung, and T. F. Kassner, Uniaxial Tensile Properties of Zircaloy Containing Oxygen: summary Report, 1977.
DOI : 10.2172/5244985

M. J. Roddy, W. R. Cannon, G. Skandan, and H. Hahn, Creep behavior of nanocrystalline monoclinic ZrO2, Journal of the European Ceramic Society, vol.22, issue.14-15, pp.2657-2662, 2002.
DOI : 10.1016/S0955-2219(02)00130-9

A. H. Chokshi, Diffusion, diffusion creep and grain growth characteristics of nanocrystalline and fine-grained monoclinic, tetragonal and cubic zirconia, Scripta Materialia, vol.48, issue.6, pp.791-796, 2003.
DOI : 10.1016/S1359-6462(02)00519-5

M. Yoshida, Y. Shinoda, T. Akatsu, and F. Wakai, Superplasticity-like Deformation of Nanocrystalline Monoclinic Zirconia at Elevated Temperatures, Journal of the American Ceramic Society, vol.36, issue.4, pp.1122-1125, 2004.
DOI : 10.1016/S0921-5093(97)00339-0

L. Saux, M. Besson, J. Carassou, S. Poussard, C. Averty et al., A model to describe the anisotropic viscoplastic mechanical behavior of fresh and irradiated Zircaloy-4 fuel claddings under RIA loading conditions, Journal of Nuclear Materials, vol.378, issue.1, pp.60-69, 2008.
DOI : 10.1016/j.jnucmat.2008.04.017
URL : https://hal.archives-ouvertes.fr/hal-00311854

J. Stuckert, M. Große, and M. Walter, Mechanical properties of pre-hydrogenated (600 ? 5000 wppm) cladding segments, Proceedings of the Quench Workshop 2010, 2010.

C. Salcedo and A. , Modeling of mechanical behavior of quenched zirconium-based nuclear fuel claddings, after a high temperature oxidation, Mines ParisTech, 2012.
URL : https://hal.archives-ouvertes.fr/pastel-00705085

J. C. Brachet, D. Hamon, J. L. Béchade, P. Forget, C. Toffolon-masclet et al., Quantification of the chemical elements partitioning within pre-hydrided Zircaloy-4 after high temperature steam oxidation as a function of the final cooling scenario (LOCA conditions) and consequences on the (local) materials hardening, Proceedings of the IAEA Technical Meeting on Fuel Behaviour and Modelling Under Severe Transient and LOCA Conditions, IAEA-TECDOC-CD-1709, Mito-city Ibaraki-ken, pp.253-265, 2011.

I. Turque, L. Saux, M. Brachet, J. C. Crépin, J. André et al., Metallurgical evolution of a highly hydrided zirconium alloy upon cooling from high temperature, Proceedings of the Minerals, Metals and Materials Society 2015 144th Annual Meeting & Exhibition, 2015.

A. Pshenichnikov, J. Stuckert, M. Walter, and D. Litvinov, Hydrides and fracture of pure zirconium and Zircaloy-4 hydrogenated at temperatures typical for loss-of-coolant accident conditions, Proceedings of the 23rd International Conference on Nuclear Engineering (ICONE-23), 2015.

J. C. Brachet, C. Toffolon-masclet, D. Hamon, T. Guilbert, G. Trego et al., Oxygen, Hydrogen and Main Alloying Chemical Elements Partitioning Upon Alpha??????Beta Phase Transformation in Zirconium Alloys, Solid State Phenomena, vol.172, issue.174, pp.172-174, 2011.
DOI : 10.4028/www.scientific.net/SSP.172-174.753

N. A. Leech and A. Garlick, The influence of environment on the formation of fluting microstructures during fracture of Zircaloy, Journal of Nuclear Materials, vol.125, issue.1, pp.19-24, 1984.
DOI : 10.1016/0022-3115(84)90511-7

S. Yamanaka, K. Yamada, K. Kurosaki, M. Uno, K. Takeda et al., Analysis of the electronic structure of zirconium hydride, Journal of Alloys and Compounds, vol.330, issue.332, pp.330-332, 2002.
DOI : 10.1016/S0925-8388(01)01449-9

S. Yamanaka, D. Setoyama, H. Muta, M. Uno, M. Kuroda et al., Characteristics of zirconium hydrogen solid solution, Journal of Alloys and Compounds, vol.372, issue.1-2, pp.129-135, 2004.
DOI : 10.1016/j.jallcom.2003.09.140

S. Lynch, Hydrogen embrittlement phenomena and mechanisms, Corrosion Reviews, vol.85, issue.3-4, pp.105-123, 2012.
DOI : 10.1080/14786437408213555

N. Rupa, M. Clavel, P. Bouffioux, C. Domain, and A. Legris, About the Mechanisms Governing the Hydrogen Effect on Viscoplasticity of Unirradiated Fully Annealed Zircaloy-4 Sheet, Zirconium in the Nuclear Industry : Thirteenth International Symposium, ASTM STP 1423, G.D. Moan and P. Rudling, pp.811-834, 2002.
DOI : 10.1520/STP11418S

L. Saux, M. Besson, J. Carassou, S. Poussard, C. Averty et al., Behavior and failure of uniformly hydrided Zircaloy-4 fuel claddings between 25??C and 480??C under various stress states, including RIA loading conditions, Engineering Failure Analysis, vol.17, issue.3, pp.683-700, 2010.
DOI : 10.1016/j.engfailanal.2009.07.001
URL : https://hal.archives-ouvertes.fr/hal-00461500

M. Grange, J. Besson, and E. Andrieu, Anisotropic behavior and rupture of hydrided ZIRCALOY-4 sheets, Metallurgical and Materials Transactions A, vol.19, issue.8, pp.679-690, 2000.
DOI : 10.1007/BF02674025