H. P. Jost, Lubrication: Tribology; Education and Research; Report on the Present Position and Industry's Needs (submitted to the Department of Education and Science by the Lubrication Engineering and Research) Working Group, HM Stationery Office, 1966.

I. Tzanakis, M. Hadfield, B. Thomas, S. Noya, I. Henshaw et al., Future perspectives on sustainable tribology, Renewable and Sustainable Energy Reviews, vol.16, pp.4126-4166, 2012.

C. Donnet and A. Erdemir, Solid lubricant coatings: recent developments and future trends, Tribology Letters, vol.17, pp.389-97, 2004.

H. Spikes, Sixty years of EHL, Lubr Sci, vol.18, pp.265-91, 2006.

A. Neville, A. Morina, T. Haque, and M. Voong, Compatibility between tribological surfaces and lubricant additives-how friction and wear reduction can be controlled by surface/lube synergies, Tribol Int, vol.40, pp.1680-95, 2007.

K. Holmberg, P. Andersson, and A. Erdemir, Global energy consumption due to friction in passenger cars, Tribol Int, vol.47, pp.221-255, 2012.

J. Greenwood and J. Williamson, Contact of Nominally Flat Surfaces, Proc R Soc A, vol.295, pp.300-319, 1966.

B. Persson, Theory of rubber friction and contact mechanics, J Chem Phys, vol.115, pp.3840-61, 2001.

R. W. Carpick and M. Salmeron, Scratching the surface: fundamental investigations of tribology with atomic force microscopy, Chem Rev, vol.97, pp.1163-94, 1997.

B. Persson, O. Albohr, U. Tartaglino, A. Volokitin, and E. Tosatti, On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion, Journal of Physics: Condensed Matter, vol.17, p.1, 2004.

G. E. Morales-espejel, Surface roughness effects in elastohydrodynamic lubrication: A review with contributions, Proc Inst Mech Eng Part J, vol.228, pp.1217-1259, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01083003

S. H. Kim, A. Db, M. T. Dugger, and M. Nanotribology, Nano today, vol.2, pp.22-31, 2007.

B. Bhushan, Nanotribology and nanomechanics of MEMS/NEMS and BioMEMS/BioNEMS materials and devices, Microelectronic Engineering, vol.84, pp.387-412, 2007.

S. V. Canchi and D. B. Bogy, Thermal fly-height control slider instability and dynamics at touchdown: Explanations using nonlinear systems theory, J Tribol, vol.133, p.21902, 2011.

A. I. Vakis, C. N. Hadjicostis, and A. A. Polycarpou, Three-DOF dynamic model with lubricant contact for thermal fly-height control nanotechnology, J Phys D, vol.45, p.135402, 2012.

P. Cann and M. Wimmer, Welcome to the first issue of Biotribology, p.1, 2015.

J. Van-kuilenburg, M. A. Masen, and E. Van-der-heide, A review of fingerpad contact mechanics and friction and how this affects tactile perception, Proc Inst Mech Eng Part J, vol.229, pp.243-58, 2015.

S. Ma, M. Scaraggi, D. Wang, X. Wang, Y. Liang et al., Nanoporous Substrate-Infiltrated Hydrogels: a Bioinspired Regenerable Surface for High Load Bearing and Tunable Friction, vol.25, pp.7366-74, 2015.

H. Rashid, The effect of surface roughness on ceramics used in dentistry: A review of literature, Eur J Dent, vol.8, pp.571-580, 2014.

J. Martin, C. Donnet, L. Mogne, T. Epicier, and T. , Superlubricity of molybdenum disulphide, Physical Review B, vol.48, p.10583, 1993.

M. Dienwiebel, G. S. Verhoeven, N. Pradeep, J. W. Frenken, J. A. Heimberg et al., Superlubricity of graphite, Phys Rev Lett, vol.92, p.126101, 2004.

M. Hirano and K. Shinjo, Superlubricity and frictional anisotropy, Wear, vol.168, pp.121-126, 1993.

M. Urbakh, Friction: Towards macroscale superlubricity, Nature nanotechnology, vol.8, pp.893-897, 2013.

D. Berman, S. A. Deshmukh, S. K. Sankaranarayanan, A. Erdemir, and A. V. Sumant, Friction. Macroscale superlubricity enabled by graphene nanoscroll formation, Science, vol.348, pp.1118-1140, 2015.

G. Carbone, E. Pierro, and S. N. Gorb, Origin of the superior adhesive performance of mushroom-shaped microstructured surfaces, Soft Matter, vol.7, pp.5545-52, 2011.

L. Afferrante, G. Carbone, G. Demelio, and N. Pugno, Adhesion of elastic thin films: double peeling of tapes versus axisymmetric peeling of membranes, Tribology Letters, vol.52, pp.439-486, 2013.

T. W. Kim and B. Bhushan, The adhesion model considering capillarity for gecko attachment system, J R Soc Interface, vol.5, pp.319-346, 2008.

B. Persson and S. Gorb, The effect of surface roughness on the adhesion of elastic plates with application to biological systems, J Chem Phys, vol.119, pp.11437-11481, 2003.

A. Papangelo and M. Ciavarella, A Maugis-Dugdale cohesive solution for adhesion of a surface with a dimple, J R Soc Interface, vol.14, 2017.

A. K. Geim, S. Dubonos, I. Grigorieva, K. Novoselov, A. Zhukov et al., Microfabricated adhesive mimicking gecko foot-hair, Nature materials, vol.2, p.461, 2003.

M. Zhou, N. Pesika, H. Zeng, Y. Tian, and J. Israelachvili, Recent advances in gecko adhesion and friction mechanisms and development of gecko-inspired dry adhesive surfaces, Friction, vol.1, pp.114-143, 2013.

G. Huber, H. Mantz, R. Spolenak, K. Mecke, K. Jacobs et al., Evidence for capillarity contributions to gecko adhesion from single spatula nanomechanical measurements, Proc Natl Acad Sci U S A, vol.102, pp.16293-16299, 2005.

S. Ma, M. Scaraggi, P. Lin, B. Yu, D. Wang et al., Nanohydrogel Brushes for Switchable Underwater Adhesion, The Journal of Physical Chemistry C, vol.121, pp.8452-63, 2017.

M. Kappl, F. Kaveh, and W. Barnes, Nanoscale friction and adhesion of tree frog toe pads, Bioinspiration & biomimetics, vol.11, p.35003, 2016.

S. N. Gorb, M. Sinha, A. Peressadko, K. A. Daltorio, and R. D. Quinn, Insects did it first: a micropatterned adhesive tape for robotic applications, Bioinspiration & biomimetics, vol.2, p.117, 2007.

K. Autumn, M. Sitti, Y. A. Liang, A. M. Peattie, W. R. Hansen et al., Evidence for van der Waals adhesion in gecko setae, Proc Natl Acad Sci U S A, vol.99, pp.12252-12258, 2002.

K. Cho, J. Koh, S. Kim, W. Chu, Y. Hong et al., Review of manufacturing processes for soft biomimetic robots, International Journal of Precision Engineering and Manufacturing, vol.10, pp.171-81, 2009.

J. Scheibert, S. Leurent, A. Prevost, and G. Debregeas, The role of fingerprints in the coding of tactile information probed with a biomimetic sensor, Science, vol.323, pp.1503-1509, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00433538

V. Hayward, Is there a 'plenhaptic' function?, Philos Trans R Soc Lond B Biol Sci, vol.366, pp.3115-3137, 2011.

T. J. Prescott, M. E. Diamond, and A. M. Wing, Active touch sensing, Philos Trans R Soc Lond B Biol Sci, vol.366, pp.2989-95, 2011.
DOI : 10.1098/rstb.2011.0167

URL : http://rstb.royalsocietypublishing.org/content/366/1581/2989.full.pdf

A. Klöcker, M. Wiertlewski, V. Théate, V. Hayward, and J. Thonnard, Physical factors influencing pleasant touch during tactile exploration, Plos one, vol.8, p.79085, 2013.

M. T. Johnson, V. D. Sluis, and D. Brokken, User interface with haptic feedback, p.420, 2013.

K. L. Johnson, Contact mechanics, 1985.

J. R. Barber and M. Ciavarella, Contact mechanics, Int J Solids Structures, vol.37, pp.29-43, 2000.

V. Popov, Contact mechanics and friction: physical principles and applications, 2010.

B. Persson, Sliding friction: physical principles and applications, 2013.

G. Adams and M. Nosonovsky, Contact modeling-forces, Tribol Int, vol.33, pp.431-473, 2000.
DOI : 10.1016/s0301-679x(00)00063-3

J. A. Tichy and D. M. Meyer, Review of solid mechanics in tribology, Int J Solids Structures, vol.37, pp.391-400, 2000.

D. Maugis, Contact, adhesion and rupture of elastic solids, 2013.

H. Hertz, Über die berührung fester elastische Körper und über die Harte. Verhandlungen des Vereins zur Beförderung des Gewerbefleisses 1882

K. L. Johnson, K. Kendall, and A. D. Roberts, Surface energy and the contact of elastic solids, Proc R Soc A, vol.324, pp.301-314, 1971.

B. V. Derjaguin, V. M. Muller, and Y. P. Toporov, Effect of contact deformations on the adhesion of particles, J Colloid Interface Sci, vol.53, pp.314-340, 1975.

A. Constantinescu, A. Korsunsky, O. Pison, and A. Oueslati, Symbolic and numerical solution of the axisymmetric indentation problem for a multilayered elastic coating, Int J Solids Structures, vol.50, pp.2798-807, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00832623

K. Komvopoulos and Z. Gong, Stress analysis of a layered elastic solid in contact with a rough surface exhibiting fractal behavior, Int J Solids Structures, vol.44, pp.2109-2138, 2007.

W. W. Chen, K. Zhou, L. M. Keer, and Q. J. Wang, Modeling elasto-plastic indentation on layered materials using the equivalent inclusion method, Int J Solids Structures, vol.47, pp.2841-54, 2010.

C. Bagault, D. Nélias, M. C. Baietto, and T. C. Ovaert, Contact analyses for anisotropic half-space coated with an anisotropic layer: Effect of the anisotropy on the pressure distribution and contact area, Int J Solids Structures, vol.50, pp.743-54, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00938370

S. J. Chidlow and M. Teodorescu, Sliding contact problems involving inhomogeneous materials comprising a coating-transition layer-substrate and a rigid punch, Int J Solids Structures, vol.51, pp.1931-1976, 2014.

C. Putignano, G. Carbone, and D. Dini, Mechanics of rough contacts in elastic and viscoelastic thin layers, Int J Solids Structures, pp.507-524, 2015.

G. Stan and G. G. Adams, Adhesive contact between a rigid spherical indenter and an elastic multilayer coated substrate, Int J Solids Structures, vol.87, pp.1-10, 2016.
DOI : 10.1016/j.ijsolstr.2016.02.043

URL : http://europepmc.org/articles/pmc4999918?pdf=render

M. Zhang, N. Zhao, P. Glaws, P. Hegedus, Q. Zhou et al., Elasto-plastic contact of materials containing double-layered inhomogeneities, Int J Solids Structures, pp.208-232, 2017.
DOI : 10.1016/j.ijsolstr.2017.08.006

S. Reina, D. Dini, D. Hills, and Y. Iida, A quadratic programming formulation for the solution of layered elastic contact problems: Example applications and experimental validation, European Journal of Mechanics-A/Solids, vol.30, pp.236-283, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00734534

M. Ciavarella, The generalized Cattaneo partial slip plane contact problem. I-Theory, Int J Solids Structures, vol.35, pp.2349-62, 1998.

D. Dini and D. A. Hills, A method based on asymptotics for the refined solution of almost complete partial slip contact problems, European Journal of Mechanics -A/Solids, vol.22, pp.851-860, 2003.

A. Sackfield, D. A. Hills, and H. Qiu, Side-contact of sharp indenters, including the effects of friction, Int J Mech Sci, vol.49, pp.567-76, 2007.

R. C. Flicek, D. A. Hills, and D. Dini, Sharp edged contacts subject to fretting: A description of corner behaviour, Int J Fatigue, vol.71, pp.26-34, 2015.

N. Sundaram and T. Farris, Mechanics of advancing pin-loaded contacts with friction, J Mech Phys Solids, vol.58, pp.1819-1852, 2010.

R. Fleury, D. A. Hills, R. R. Barber, and J. R. , Incomplete contacts in partial slip subject to varying normal and shear loading, and their representation by asymptotes, J Mech Phys Solids, vol.99, pp.178-91, 2017.

D. A. Hills and D. Dini, A new method for the quantification of nucleation of fretting fatigue cracks using asymptotic contact solutions, Tribol Int, vol.39, pp.1114-1136, 2006.

A. Mugadu, D. Hills, J. Barber, and A. Sackfield, The application of asymptotic solutions to characterising the process zone in almost complete frictional contacts, Int J Solids Structures, vol.41, pp.385-97, 2004.

D. Dini, J. Barber, C. Churchman, A. Sackfield, and D. Hills, The application of asymptotic solutions to contact problems characterised by logarithmic singularities, European Journal of Mechanics-A/Solids, vol.27, pp.847-58, 2008.

P. Ballard, Steady sliding frictional contact problem for a 2d elastic half-space with a discontinuous friction coefficient and related stress singularities, J Mech Phys Solids, vol.97, pp.225-59, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01668491

W. C. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J Mater Res, vol.7, pp.1564-83, 1992.
URL : https://hal.archives-ouvertes.fr/hal-01518596

W. C. Oliver and G. M. Pharr, Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology, J Mater Res, vol.19, pp.3-20, 2004.

H. Butt, B. Cappella, and M. Kappl, Force measurements with the atomic force microscope: Technique, interpretation and applications, Surf Sci Rep, vol.59, pp.1-152, 2005.

R. Ramesh and D. Hills, Recent progress in understanding the properties of elastic contacts, Proc Inst Mech Eng Part C, vol.229, pp.2117-2143, 2015.

M. E. Kartal, J. R. Barber, D. A. Hills, and D. Nowell, Partial slip problem for two semi-infinite strips in contact, Int J Eng Sci, vol.49, pp.203-214, 2011.

R. C. Flicek, D. A. Hills, J. R. Barber, and D. Dini, Determination of the shakedown limit for large, discrete frictional systems, European Journal of Mechanics -A/Solids, vol.49, pp.242-50, 2015.

M. Eriten, A. Polycarpou, and L. Bergman, Physics-based modeling for fretting behavior of nominally flat rough surfaces, Int J Solids Structures, vol.48, pp.1436-50, 2011.

A. Papangelo, M. Ciavarella, and J. Barber, Fracture mechanics implications for apparent static friction coefficient in contact problems involving slip-weakening laws, vol.471, 2015.

A. Ruina and J. R. Rice, Stability of steady frictional slipping, Journal of Applied Mechanics, vol.50, pp.343-352, 1983.

G. G. Adams, Self-excited oscillations of two elastic half-spaces sliding with a constant coefficient of friction, J appl Mech, vol.62, pp.867-72, 1995.

G. G. Adams and S. Muftu, Improvements to a scale-dependent model for contact and friction, J Phys D, vol.38, pp.1402-1411, 2005.

W. J. Stronge, Impact mechanics, 2004.

C. Thornton, S. J. Cummins, and P. W. Cleary, On elastic-plastic normal contact force models, with and without adhesion, Powder Technol, vol.315, pp.339-385, 2017.

B. Yildirim, H. Yang, A. Gouldstone, and S. Müftü, Rebound mechanics of micrometre-scale, spherical particles in high-velocity impacts, vol.473, 2017.

Y. Ye and Y. Zeng, A size-dependent viscoelastic normal contact model for particle collision, Int J Impact Eng, vol.106, pp.120-152, 2017.

K. Yu, H. A. Elghannay, and D. Tafti, An impulse based model for spherical particle collisions with sliding and rolling, Powder Technol, vol.319, pp.102-118, 2017.

A. Banerjee, A. Chanda, and R. Das, Historical origin and recent development on normal directional impact models for rigid body contact simulation: a critical review, Archives of Computational Methods in Engineering, vol.24, pp.397-422, 2017.

Y. Yi, J. R. Barber, and P. Zagrodzki, Eigenvalue solution of thermoelastic instability problems using Fourier reduction, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol.456, pp.2799-821, 2000.

L. Afferrante, M. Ciavarella, P. Decuzzi, and G. Demelio, Transient analysis of frictionally excited thermoelastic instability in multi-disk clutches and brakes, Wear, vol.254, pp.136-182, 2003.

D. Nowell, D. Dini, and D. Hills, Recent developments in the understanding of fretting fatigue, Eng Fract Mech, vol.73, pp.207-229, 2006.

D. A. Hills and D. Nowell, Mechanics of fretting fatigue-Oxford's contribution, Tribol Int, vol.76, pp.1-5, 2014.

J. Araujo and D. Nowell, The effect of rapidly varying contact stress fields on fretting fatigue, Int J Fatigue, vol.24, pp.763-75, 2002.

S. E. Kinyon, Fretting fatigue: advances in basic understanding and applications, 2003.

M. Ciavarella, A 'crack-like' notch analogue for a safe-life fretting fatigue design methodology, Fatigue & Fracture of Engineering Materials & Structures, vol.26, pp.1159-70, 2003.

D. W. Hoeppner, Fretting fatigue case studies of engineering components, Tribol Int, vol.39, pp.1271-1277, 2006.

A. Bower, The influence of crack face friction and trapped fluid on surface initiated rolling contact fatigue cracks, Journal of Tribology, vol.110, pp.704-715, 1988.

L. Afferrante, M. Ciavarella, and G. Demelio, A re-examination of rolling contact fatigue experiments by Clayton and Su with suggestions for surface durability calculations, Wear, vol.256, pp.329-363, 2004.

A. Ponter, L. Afferrante, and M. Ciavarella, A note on Merwin's measurements of forward flow in rolling contact, Wear, vol.256, pp.321-329, 2004.

F. J. Franklin, I. Widiyarta, and A. Kapoor, Computer simulation of wear and rolling contact fatigue, Wear, vol.251, pp.949-55, 2001.

J. J. Kalker, Three-dimensional elastic bodies in rolling contact, 2013.

F. Sadeghi, B. Jalalahmadi, T. S. Slack, N. Raje, and N. K. Arakere, A review of rolling contact fatigue, Journal of tribology, vol.131, p.41403, 2009.

W. Yang, Y. Huang, Q. Zhou, J. Wang, J. X. Keer et al., Parametric study on stressed volume and its application to the quantification of rolling contact fatigue performance of heterogeneous material, Tribol Int, vol.107, pp.221-253, 2017.

W. Solano-alvarez, M. J. Peet, E. J. Pickering, J. Jaiswal, A. Bevan et al., Synchrotron and neural network analysis of the influence of composition and heat treatment on the rolling contact fatigue of hypereutectoid pearlitic steels, Materials Science and Engineering: A, vol.707, pp.259-69, 2017.

Y. Jiang, B. Xu, and H. Sehitoglu, Three-dimensional elastic-plastic stress analysis of rolling contact, Journal of Tribology, vol.124, pp.699-708, 2002.

I. G. Goryacheva, Contact mechanics in tribology, 2013.
DOI : 10.1007/978-94-015-9048-8

E. V. Torskaya, Modeling of frictional interaction of a rough indenter and a two-layer elastic halfspace, Physical Mesomechanics, vol.15, pp.245-50, 2012.

I. Goryacheva and Y. Makhovskaya, Adhesion effect in sliding of a periodic surface and an individual indenter upon a viscoelastic base, The Journal of Strain Analysis for Engineering Design, vol.51, pp.286-93, 2016.

I. Goryacheva and A. Shpenev, Modelling of a punch with a regular base relief sliding along a viscoelastic foundation with a liquid lubricant, J Appl Math Mech, vol.76, pp.582-591, 2012.

A. Majumdar and B. Bhushan, Fractal model of elastic-plastic contact between rough surfaces, ASME J Tribol, vol.113, pp.1-11, 1991.
DOI : 10.1115/1.2920588

J. F. Archard, Elastic Deformation and the Laws of Friction, Proceedings of the Royal Society of London.Series A, Mathematical and Physical Sciences, vol.243, pp.190-205, 1957.

M. Ciavarella, G. Demelio, J. R. Barber, and Y. H. Jang, Linear elastic contact of the Weierstrass profile, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol.456, pp.387-405, 2000.
DOI : 10.1098/rspa.2000.0522

URL : http://www-personal.umich.edu/%7Ejbarber/Weierstrass.pdf

M. H. Müser, W. B. Dapp, R. Bugnicourt, P. Sainsot, N. Lesaffre et al., Meeting the Contact-Mechanics Challenge, Tribology Letters, vol.65, p.118, 2017.

P. R. Nayak, Random Process Model of Rough Surfaces, J Lubr Technol, vol.93, pp.398-407, 1971.
DOI : 10.1115/1.3451608

M. S. Longuet-higgins, The statistical analysis of a random, moving surface, Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol.249, pp.321-87, 1957.

M. S. Longuet-higgins, Statistical properties of an isotropic random surface, Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol.250, pp.157-74, 1957.
DOI : 10.1098/rsta.1957.0018

A. W. Bush, R. D. Gibson, and T. R. Thomas, The elastic contact of a rough surface, Wear, vol.35, pp.87-111, 1975.

J. A. Greenwood, A simplified elliptic model of rough surface contact, Wear, vol.261, pp.191-200, 2006.

M. Paggi and M. Ciavarella, The coefficient of proportionality k between real contact area and load, with new asperity models, Wear, vol.268, pp.1020-1029, 2010.

G. Carbone and F. Bottiglione, Asperity contact theories: Do they predict linearity between contact area and load?, J Mech Phys Solids, vol.56, pp.2555-72, 2008.

V. A. Yastrebov, G. Anciaux, and J. Molinari, The role of the roughness spectral breadth in elastic contact of rough surfaces, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01599693

M. Ciavarella, J. A. Greenwood, and M. Paggi, Inclusion of ''interaction'' in the Greenwood and Williamson contact theory, Wear, vol.265, pp.729-763, 2008.

S. Chandrasekar, M. Eriten, and A. A. Polycarpou, An Improved Model of Asperity Interaction in Normal Contact of Rough Surfaces, J Appl Mech, vol.80, p.11025, 2013.

A. I. Vakis, Asperity Interaction and Substrate Deformation in Statistical Summation Models of Contact Between Rough Surfaces, J Appl Mech, vol.81, p.41012, 2014.

M. Ciavarella, V. Delfine, and G. Demelio, A "re-vitalized" Greenwood and Williamson model of elastic contact between fractal surfaces, J Mech Phys Solids, vol.54, pp.2569-91, 2006.

C. Putignano, L. Afferrante, G. Carbone, and G. Demelio, The influence of the statistical properties of self-affine surfaces in elastic contacts: A numerical investigation, J Mech Phys Solids, vol.60, pp.973-82, 2012.

B. Persson, F. Bucher, and B. Chiaia, Elastic contact between randomly rough surfaces: comparison of theory with numerical results, Physical Review B, vol.65, p.184106, 2002.

W. Manners and J. A. Greenwood, Some observations on Persson's diffusion theory of elastic contact, Wear, vol.261, pp.600-610, 2006.

S. Hyun, L. Pei, J. Molinari, and M. O. Robbins, Finite-element analysis of contact between elastic selfaffine surfaces, Physical Review E, vol.70, p.26117, 2004.

G. Zavarise, M. Borri-brunetto, and M. Paggi, On the reliability of microscopical contact models, Wear, vol.257, pp.229-274, 2004.

S. Hyun and M. O. Robbins, Elastic contact between rough surfaces: Effect of roughness at large and small wavelengths, Tribol Int, vol.40, pp.1413-1435, 2007.

C. Campaná and M. H. Müser, Contact mechanics of real vs. randomly rough surfaces: A Green's function molecular dynamics study, Europhysics Letters), vol.77, p.38005, 2007.

C. Campañá, M. H. Müser, and M. O. Robbins, Elastic contact between self-affine surfaces: comparison of numerical stress and contact correlation functions with analytic predictions, J Phys : Cond Matter, vol.20, p.354013, 2008.

A. Almqvist, C. Campañá, N. Prodanov, and B. Persson, Interfacial separation between elastic solids with randomly rough surfaces: Comparison between theory and numerical techniques, J Mech Phys Solids, vol.59, pp.2355-69, 2011.

C. Putignano, L. Afferrante, G. Carbone, and G. Demelio, A new efficient numerical method for contact mechanics of rough surfaces, Int J Solids Structures, vol.49, pp.338-381, 2012.

L. Pastewka, N. Prodanov, B. Lorenz, M. H. Müser, M. O. Robbins et al., Finite-size scaling in the interfacial stiffness of rough elastic contacts, Physical Review E, vol.87, p.62809, 2013.

W. B. Dapp, N. Prodanov, and M. H. Müser, Systematic analysis of Persson's contact mechanics theory of randomly rough elastic surfaces, Journal of Physics: Condensed Matter, vol.26, p.355002, 2014.

N. Prodanov, W. B. Dapp, and M. H. Müser, On the Contact Area and Mean Gap of Rough, Elastic Contacts: Dimensional Analysis, Numerical Corrections, and Reference Data, Tribol Lett, vol.53, pp.433-481, 2014.

V. A. Yastrebov, G. Anciaux, and J. Molinari, From infinitesimal to full contact between rough surfaces: Evolution of the contact area, Int J Solids Structures, vol.52, pp.83-102, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01113725

S. Solhjoo and A. I. Vakis, Continuum mechanics at the atomic scale: Insights into non-adhesive contacts using molecular dynamics simulations, J Appl Phys, vol.120, p.215102, 2016.

A. Papangelo, N. Hoffmann, and M. Ciavarella, Load-separation curves for the contact of self-affine rough surfaces, Scientific Reports, vol.7, p.6900, 2017.

C. Yang and B. Persson, Contact mechanics: contact area and interfacial separation from small contact to full contact, Journal of Physics: Condensed Matter, vol.20, p.215214, 2008.

O. C. Zienkiewicz and R. L. Taylor, The finite element method: solid mechanics, 2000.

P. K. Banerjee and R. Butterfield, Boundary element methods in engineering science, 1981.

A. Hrennikoff, Solution of problems of elasticity by the framework method, Journal of applied mechanics, vol.8, pp.169-75, 1941.

R. Courant, Variational methods for the solution of problems of equilibrium and vibrations, Bulletin of the American mathematical Society, vol.49, pp.1-23, 1943.

K. L. Johnson, J. A. Greenwood, and J. G. Higginson, The contact of elastic regular wavy surfaces, Int J Mech Sci, vol.27, pp.383-96, 1985.

H. M. Stanley and T. Kato, An FFT-Based Method for Rough Surface Contact, Journal of Tribology, vol.119, pp.481-486, 1997.

T. A. Laursen, Computational Contact and Impact Mechanics: Fundamentals of Modelling Interfacial Phenomena in Nonlinear Finite Element Analysis, 2002.

P. Wriggers, Computational contact mechanics, 2006.

V. A. Yastrebov, Numerical methods in contact mechanics, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00785235

A. Bemporad and M. Paggi, Optimization algorithms for the solution of the frictionless normal contact between rough surfaces, Int J Solids Structures, pp.94-105, 2015.

L. Rodríguez-tembleque and R. Abascal, A 3D FEM-BEM rolling contact formulation for unstructured meshes, Int J Solids Structures, vol.47, pp.330-53, 2010.

A. Zografos, D. Dini, and A. V. Olver, Fretting fatigue and wear in bolted connections: A multi-level formulation for the computation of local contact stresses, Tribol Int, vol.42, pp.1663-75, 2009.

D. Spence, The Hertz contact problem with finite friction, Journal of elasticity, vol.5, pp.297-319, 1975.

C. Jacq, D. Nélias, G. Lormand, and D. Girodin, Development of a three-dimensional semi-analytical elastic-plastic contact code, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00454903

F. Sahlin, R. Larsson, A. Almqvist, P. M. Lugt, and P. Marklund, A mixed lubrication model incorporating measured surface topography. Part 1: Theory of flow factors, Proc Inst Mech Eng Part J, vol.224, pp.335-51, 2010.

F. Sahlin, R. Larsson, P. Marklund, A. Almqvist, and P. M. Lugt, A mixed lubrication model incorporating measured surface topography. Part 2: Roughness treatment, model validation, and simulation, Proc Inst Mech Eng Part J, vol.224, pp.353-65, 2010.

G. Carbone and C. Putignano, A novel methodology to predict sliding and rolling friction of viscoelastic materials: theory and experiments, J Mech Phys Solids, vol.61, pp.1822-1856, 2013.

R. Bugnicourt, P. Sainsot, N. Lesaffre, and A. Lubrecht, Transient frictionless contact of a rough rigid surface on a viscoelastic half-space, Tribol Int, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01446969

V. A. Yastrebov, J. Durand, H. Proudhon, and G. Cailletaud, Rough surface contact analysis by means of the Finite Element Method and of a new reduced model, Comptes Rendus Mécanique, vol.339, pp.473-90, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00624090

M. Scaraggi, D. Comingio, A. Al-qudsi, D. Lorenzis, and L. , The influence of geometrical and rheological non-linearity on the calculation of rubber friction, Tribol Int, vol.101, pp.402-415, 2016.

J. Leroux, B. Fulleringer, and D. Nelias, Contact analysis in presence of spherical inhomogeneities within a half-space, Int J Solids Structures, vol.47, pp.3034-3083, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00514526

M. Paggi and G. Zavarise, Contact mechanics of microscopically rough surfaces with graded elasticity, European Journal of Mechanics-A/Solids, vol.30, pp.696-704, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00769686

T. Dick and G. Cailletaud, Fretting modelling with a crystal plasticity model of Ti6Al4V, Computational Materials Science, vol.38, pp.113-138, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00133520

O. Casals and S. Forest, Finite element crystal plasticity analysis of spherical indentation in bulk single crystals and coatings, Computational Materials Science, vol.45, pp.774-82, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00379227

B. Yang and T. A. Laursen, A mortar-finite element approach to lubricated contact problems, Comput Methods Appl Mech Eng, vol.198, pp.3656-69, 2009.

T. Nanbu, N. Ren, Y. Yasuda, D. Zhu, and Q. J. Wang, Micro-textures in concentrated conformalcontact lubrication: effects of texture bottom shape and surface relative motion, Tribology Letters, vol.29, pp.241-52, 2008.

S. Stupkiewicz, J. Lengiewicz, P. Sadowski, and S. Kucharski, Finite deformation effects in soft elastohydrodynamic lubrication problems, Tribol Int, vol.93, pp.511-533, 2016.

L. Rodríguez-tembleque, A. Sáez, F. C. Buroni, and F. M. Aliabadi, Quasistatic electro-elastic contact modeling using the boundary element method, vol.681, pp.185-96, 2016.

V. A. Yastrebov, G. Cailletaud, H. Proudhon, F. Mballa, S. Noël et al., Three-level multiscale modeling of electrical contacts sensitivity study and experimental validation, pp.414-436, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01218663

D. Zhu and Y. Hu, A computer program package for the prediction of EHL and mixed lubrication characteristics, friction, subsurface stresses and flash temperatures based on measured 3-D surface roughness, Tribol Trans, vol.44, pp.383-90, 2001.

P. H. Geubelle and J. R. Rice, A spectral method for three-dimensional elastodynamic fracture problems, J Mech Phys Solids, vol.43, pp.1791-824, 1995.

K. Ranjith, Spectral formulation of the elastodynamic boundary integral equations for bi-material interfaces, Int J Solids Structures, vol.59, pp.29-36, 2015.

D. S. Kammer, V. A. Yastrebov, P. Spijker, and J. Molinari, On the propagation of slip fronts at frictional interfaces, Tribology Letters, vol.48, pp.27-32, 2012.

V. A. Yastrebov, Sliding without slipping under Coulomb friction: opening waves and inversion of frictional force, Tribology Letters, vol.62, pp.1-8, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01419628

R. Hill, Generalized constitutive relations for incremental deformation of metal crystals by multislip, J Mech Phys Solids, vol.14, pp.95-102, 1966.

J. R. Rice, Inelastic constitutive relations for solids: an internal-variable theory and its application to metal plasticity, J Mech Phys Solids, vol.19, pp.433-55, 1971.

R. Hill and J. Rice, Constitutive analysis of elastic-plastic crystals at arbitrary strain, J Mech Phys Solids, vol.20, pp.401-414, 1972.

R. J. Asaro, Micromechanics of crystals and polycrystals, Adv Appl Mech, vol.23, pp.1-115, 1983.

F. Barbe, L. Decker, D. Jeulin, and G. Cailletaud, Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: FE model, Int J Plast, vol.17, pp.513-549, 2001.

F. Barbe, S. Forest, and G. Cailletaud, Intergranular and intragranular behavior of polycrystalline aggregates. Part 2: Results, Int J Plast, vol.17, pp.537-63, 2001.

M. Berveiller and A. Zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, J Mech Phys Solids, vol.26, pp.325-369, 1978.

C. Miehe, J. Schröder, and J. Schotte, Computational homogenization analysis in finite plasticity simulation of texture development in polycrystalline materials, Comput Methods Appl Mech Eng, vol.171, pp.387-418, 1999.

F. Roters, P. Eisenlohr, L. Hantcherli, D. D. Tjahjanto, T. R. Bieler et al., Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finiteelement modeling: Theory, experiments, applications, Acta Materialia, vol.58, pp.1152-211, 2010.

R. A. Lebensohn and C. Tomé, A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys, Acta Metallurgica et Materialia, vol.41, pp.2611-2635, 1993.

S. R. Kalidindi, Incorporation of deformation twinning in crystal plasticity models, J Mech Phys Solids, vol.46, pp.267273-71290, 1998.

A. Staroselsky and L. Anand, Inelastic deformation of polycrystalline face centered cubic materials by slip and twinning, J Mech Phys Solids, vol.46, pp.671675-3696, 1998.

P. Thamburaja and L. Anand, Polycrystalline shape-memory materials: effect of crystallographic texture, J Mech Phys Solids, vol.49, pp.709-746, 2001.

S. Turteltaub and A. Suiker, Transformation-induced plasticity in ferrous alloys, J Mech Phys Solids, vol.53, pp.1747-88, 2005.

M. Ortiz and E. Repetto, Nonconvex energy minimization and dislocation structures in ductile single crystals, J Mech Phys Solids, vol.47, pp.397-462, 1999.

L. S. Tóth, Y. Estrin, R. Lapovok, and C. Gu, A model of grain fragmentation based on lattice curvature, Acta Materialia, vol.58, pp.1782-94, 2010.

H. Petryk and M. Kursa, The energy criterion for deformation banding in ductile single crystals, J Mech Phys Solids, vol.61, pp.1854-75, 2013.

K. Frydrych and K. Kowalczyk-gajewska, A three-scale crystal plasticity model accounting for grain refinement in fcc metals subjected to severe plastic deformations, Materials Science and Engineering: A, vol.658, pp.490-502, 2016.

E. Van-der-giessen and A. Needleman, Discrete dislocation plasticity: a simple planar model, Modell Simul Mater Sci Eng, vol.3, p.689, 1995.

B. Devincre and L. Kubin, Mesoscopic simulations of dislocations and plasticity, Materials Science and Engineering: A, vol.234, pp.8-14, 1997.

Z. Wang, N. Ghoniem, S. Swaminarayan, and R. Lesar, A parallel algorithm for 3D dislocation dynamics, Journal of computational physics, vol.219, pp.608-629, 2006.

A. Arsenlis, W. Cai, M. Tang, M. Rhee, T. Oppelstrup et al., Enabling strain hardening simulations with dislocation dynamics, Modell Simul Mater Sci Eng, vol.15, p.553, 2007.

M. Verdier, M. Fivel, and I. Groma, Mesoscopic scale simulation of dislocation dynamics in fcc metals: Principles and applications, Modell Simul Mater Sci Eng, vol.6, p.755, 1998.

J. Senger, D. Weygand, P. Gumbsch, and O. Kraft, Discrete dislocation simulations of the plasticity of micro-pillars under uniaxial loading, Scr Mater, vol.58, pp.587-90, 2008.

S. P. Venugopalan, M. H. Müser, and L. Nicola, Green's function molecular dynamics meets discrete dislocation plasticity, Model. Simul. Mater. Sc. Eng, 2017.

B. Gurrutxaga-lerma, D. S. Balint, D. Dini, D. E. Eakins, and A. P. Sutton, A dynamic discrete dislocation plasticity method for the simulation of plastic relaxation under shock loading, vol.469, 2013.

B. Gurrutxaga-lerma, D. S. Balint, D. Dini, D. E. Eakins, and A. P. Sutton, Attenuation of the dynamic yield point of shocked aluminum using elastodynamic simulations of dislocation dynamics, Phys Rev Lett, vol.114, p.174301, 2015.

M. Wallin, W. Curtin, M. Ristinmaa, and A. Needleman, Multi-scale plasticity modeling: Coupled discrete dislocation and continuum crystal plasticity, J Mech Phys Solids, vol.56, pp.3167-80, 2008.

Y. Xu, D. Balint, and D. Dini, A method of coupling discrete dislocation plasticity to the crystal plasticity finite element method, Modell Simul Mater Sci Eng, vol.24, p.45007, 2016.

B. Tower, Proceedings of the institution of mechanical engineers 1883, vol.34, pp.632-59

A. Grubin, Fundamentals of the hydrodynamic theory of lubrication of heavily loaded cylindrical surfaces. Investigation of the Contact Machine Componets, vol.2, 1949.

O. Reynolds, On the Theory of Lubrication and Its Application to Mr. Beauchamp Tower's Experiments, Including an Experimental Determination of the Viscosity of Olive Oil, Proceedings of the Royal Society of London, vol.40, pp.191-203, 1886.

A. Cameron and W. Wood, The full journal bearing, Proceedings of the Institution of Mechanical Engineers, vol.161, pp.59-72, 1949.

D. Dowson and G. Higginson, A numerical solution to the elasto-hydrodynamic problem, Journal of Mechanical Engineering Science, vol.1, pp.6-15, 1959.

D. Dowson and G. Higginson, The effect of material properties on the lubrication of elastic rollers, Journal of Mechanical Engineering Science, vol.2, pp.188-94, 1960.

D. Dowson, G. Higginson, and A. Whitaker, Elasto-hydrodynamic lubrication: a survey of isothermal solutions, Journal of Mechanical Engineering Science, vol.4, pp.121-127, 1962.

D. Dowson and P. Ehret, Past, present and future studies in elastohydrodynamics, Proc Inst Mech Eng Part J, vol.213, pp.317-350, 1999.

C. H. Venner and A. A. Lubrecht, Multi-level methods in lubrication, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00663246

C. Hooke, A review of the paper 'A numerical solution to the elastohydrodynamic problem'by D. Dowson and GR Higginson, Proc Inst Mech Eng Part C, vol.223, pp.49-63, 2009.

B. J. Hamrock, S. R. Schmid, and B. O. Jacobson, Fundamentals of fluid film lubrication, 2004.

T. Conry, S. Wang, and C. Cusano, A Reynolds-Eyring equation for elastohydrodynamic lubrication in line contacts, Journal of tribology, vol.109, pp.648-54, 1987.

R. Gohar and . Elastohydrodynamics, , 2001.

M. Giacopini, M. T. Fowell, D. Dini, and A. Strozzi, A mass-conserving complementarity formulation to study lubricant films in the presence of cavitation, Journal of Tribology, vol.132, p.41702, 2010.

L. Bertocchi, D. Dini, M. Giacopini, M. T. Fowell, and A. Baldini, Fluid film lubrication in the presence of cavitation: a mass-conserving two-dimensional formulation for compressible, piezoviscous and non-Newtonian fluids, Tribol Int, vol.67, pp.61-71, 2013.

T. Woloszynski, P. Podsiadlo, and G. W. Stachowiak, Efficient solution to the cavitation problem in hydrodynamic lubrication, Tribology Letters, vol.58, p.18, 2015.

P. Tucker and P. Keogh, On the dynamic thermal state in a hydrodynamic bearing with a whirling journal using CFD techniques, Journal of Tribology, vol.118, pp.356-63, 1996.

T. Almqvist and R. Larsson, The Navier-Stokes approach for thermal EHL line contact solutions, Tribol Int, vol.35, pp.163-70, 2002.

M. Hartinger, M. Dumont, S. Ioannides, D. Gosman, and H. Spikes, CFD modeling of a thermal and shear-thinning elastohydrodynamic line contact, Journal of Tribology, vol.130, p.41503, 2008.

V. Bruyere, N. Fillot, G. E. Morales-espejel, and P. Vergne, Computational fluid dynamics and full elasticity model for sliding line thermal elastohydrodynamic contacts, Tribol Int, vol.46, pp.3-13, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00655930

A. Hajishafiee, A. Kadiric, S. Ioannides, and D. Dini, A coupled finite-volume CFD solver for twodimensional elasto-hydrodynamic lubrication problems with particular application to rolling element bearings, Tribol Int, vol.109, pp.258-73, 2017.

F. J. Profito, M. Giacopini, D. C. Zachariadis, and D. Dini, A general finite volume method for the solution of the Reynolds lubrication equation with a mass-conserving cavitation model, Tribology Letters, vol.60, p.18, 2015.

F. J. Profito, S. Vl?descu, T. Reddyhoff, and D. Dini, Transient experimental and modelling studies of laser-textured micro-grooved surfaces with a focus on piston-ring cylinder liner contacts, Tribol Int, vol.113, pp.125-161, 2017.

L. Vu-quoc, X. Zhang, and L. Lesburg, Normal and tangential force-displacement relations for frictional elasto-plastic contact of spheres, Int J Solids Structures, vol.38, pp.6455-89, 2001.

H. Kruggel-emden, S. Wirtz, and V. Scherer, A study on tangential force laws applicable to the discrete element method (DEM) for materials with viscoelastic or plastic behavior, Chemical Engineering Science, vol.63, pp.1523-1564, 2008.

C. Thornton, S. J. Cummins, and P. W. Cleary, An investigation of the comparative behaviour of alternative contact force models during elastic collisions, Powder Technol, vol.210, pp.189-97, 2011.

D. Rathbone, M. Marigo, D. Dini, and B. Van-wachem, An accurate force-displacement law for the modelling of elastic-plastic contacts in discrete element simulations, Powder Technol, vol.282, pp.2-9, 2015.

R. Moreno-atanasio, B. Xu, and M. Ghadiri, Computer simulation of the effect of contact stiffness and adhesion on the fluidization behaviour of powders, Chemical engineering science, vol.62, pp.184-94, 2007.

R. Wilson, D. Dini, and B. Van-wachem, A numerical study exploring the effect of particle properties on the fluidization of adhesive particles, AIChE J, vol.62, pp.1467-77, 2016.

C. Wensrich and A. Katterfeld, Rolling friction as a technique for modelling particle shape in DEM, Powder Technol, vol.217, pp.409-426, 2012.

B. Van-wachem, M. Zastawny, F. Zhao, and G. Mallouppas, Modelling of gas-solid turbulent channel flow with non-spherical particles with large Stokes numbers, Int J Multiphase Flow, vol.68, pp.80-92, 2015.

R. P. Jensen, P. J. Bosscher, M. E. Plesha, and T. B. Edil, DEM simulation of granular media-structure interface: effects of surface roughness and particle shape, Int J Numer Anal Methods Geomech, vol.23, pp.531-578, 1999.

R. Wilson, D. Dini, and B. Van-wachem, The influence of surface roughness and adhesion on particle rolling, Powder Technol, vol.312, pp.321-354, 2017.

I. Iordanoff, A. Battentier, J. Neauport, and J. Charles, A discrete element model to investigate subsurface damage due to surface polishing, Tribol Int, vol.41, pp.957-64, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01007057

D. Richard, I. Iordanoff, M. Renouf, and Y. Berthier, Thermal study of the dry sliding contact with third body presence, Journal of Tribology, vol.130, p.31404, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00381432

B. J. Alder and T. E. Wainwright, Studies in molecular dynamics. I. General method, J Chem Phys, vol.31, pp.459-66, 1959.

R. Komanduri, N. Chandrasekaran, and L. M. Raff, MD simulation of indentation and scratching of single crystal aluminum, Wear, vol.240, pp.113-156, 2000.

M. J. Brukman, G. Gao, R. J. Nemanich, and J. A. Harrison, Temperature Dependence of Single-Asperity Diamondâ?'Diamond Friction Elucidated Using AFM and MD Simulations, J Phys Chem C, vol.112, pp.9358-69, 2008.

Y. Mo, K. T. Turner, and I. Szlufarska, Friction laws at the nanoscale, Nature, vol.457, pp.1116-1125, 2009.

T. Onodera, Y. Morita, R. Nagumo, R. Miura, A. Suzuki et al., A Computational Chemistry Study on Friction of h-MoS2. Part II. Friction Anisotropy, J Phys Chem B, vol.114, pp.15832-15840, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01813954

J. D. Schall, G. Gao, and J. A. Harrison, Effects of Adhesion and Transfer Film Formation on the Tribology of Self-Mated DLC Contacts, J Phys Chem C, vol.114, pp.5321-5351, 2010.

Y. Zhu, Y. Zhang, Y. Shi, X. Lu, J. Li et al., Lubrication Behavior of Water Molecules Confined in TiO2 Nanoslits: A Molecular Dynamics Study, J Chem Eng Data, vol.61, pp.4023-4053, 2016.

J. A. Harrison, C. T. White, R. J. Colton, and D. W. Brenner, Molecular-dynamics simulations of atomicscale friction of diamond surfaces, Phys Rev B, vol.46, pp.9700-9708, 1992.

L. Zhang and H. Tanaka, Towards a deeper understanding of wear and friction on the atomic scaleâ?"a molecular dynamics analysis, Wear, vol.211, pp.44-53, 1997.

M. H. Müser, L. Wenning, and M. O. Robbins, Simple Microscopic Theory of Amontons's Laws for Static Friction, Phys Rev Lett, vol.86, pp.1295-1303, 2001.

M. Chandross, E. B. Webb, M. J. Stevens, G. S. Grest, and S. H. Garofalini, Systematic Study of the Effect of Disorder on Nanotribology of Self-Assembled Monolayers, Phys Rev Lett, vol.93, p.166103, 2004.

D. Mulliah, S. D. Kenny, and R. Smith, Modeling of stick-slip phenomena using molecular dynamics, Phys Rev B, vol.69, p.205407, 2004.

P. Tangney, S. G. Louie, and M. L. Cohen, Dynamic Sliding Friction between Concentric Carbon Nanotubes, Phys Rev Lett, vol.93, p.65503, 2004.

J. P. Ewen, C. Gattinoni, F. M. Thakkar, N. Morgan, H. A. Spikes et al., Nonequilibrium Molecular Dynamics Investigation of the Reduction in Friction and Wear by Carbon Nanoparticles Between Iron Surfaces, Tribology Letters, vol.63, p.38, 2016.

S. Nakaoka, Y. Yamaguchi, T. Omori, and L. Joly, Molecular dynamics analysis of the friction between a water-methanol liquid mixture and a non-polar solid crystal surface, J Chem Phys, vol.146, p.174702, 2017.

J. A. Harrison, C. T. White, R. J. Colton, and D. W. Brenner, Investigation of the atomic-scale friction and energy dissipation in diamond using molecular dynamics, Thin Solid Films, vol.260, pp.205-216, 1995.

B. Bhattacharya, D. Kumar, G. R. Agarwal, A. Erkoç, ?. Singh et al., Analyzing Fe-Zn system using molecular dynamics, evolutionary neural nets and multi-objective genetic algorithms, Computational Materials Science, vol.46, pp.821-828, 2009.

P. A. Thompson, G. S. Grest, and M. O. Robbins, Phase transitions and universal dynamics in confined films, Phys Rev Lett, vol.68, p.3448, 1992.

M. Cieplak, E. D. Smith, and M. O. Robbins, Molecular origins of friction: the force on adsorbed layers, Science, vol.265, pp.1209-1221, 1994.

W. Yan and K. Komvopoulos, Three-dimensional molecular dynamics analysis of atomic-scale indentation, J Tribol, vol.120, 1998.

A. Jabbarzadeh, J. D. Atkinson, and R. I. Tanner, Effect of the wall roughness on slip and rheological properties of hexadecane in molecular dynamics simulation of Couette shear flow between two sinusoidal walls, Phys Rev E, vol.61, pp.690-699, 2000.

D. A. Rigney and S. Karthikeyan, The evolution of tribomaterial during sliding: a brief introduction, Tribology Letters, vol.39, pp.3-7, 2010.

R. Aghababaei, D. H. Warner, and J. Molinari, Critical length scale controls adhesive wear mechanisms, Nature communications, vol.7, 2016.

T. Junge and J. Molinari, Plastic activity in nanoscratch molecular dynamics simulations of pure aluminium, Int J Plast, vol.53, pp.90-106, 2014.

P. A. Romero, T. T. Järvi, N. Beckmann, M. Mrovec, and M. Moseler, Coarse graining and localized plasticity between sliding nanocrystalline metals, Phys Rev Lett, vol.113, p.36101, 2014.

V. Vahdat, K. E. Ryan, P. L. Keating, Y. Jiang, S. P. Adiga et al., Atomic-scale wear of amorphous hydrogenated carbon during intermittent contact: a combined study using experiment, simulation, and theory, Acs Nano, vol.8, pp.7027-7067, 2014.

C. D. Lorenz, J. Lane, M. Chandross, M. J. Stevens, and G. S. Grest, Molecular dynamics simulations of water confined between matched pairs of hydrophobic and hydrophilic self-assembled monolayers, Langmuir, vol.25, pp.4535-4577, 2009.

M. Doig, C. P. Warrens, and P. J. Camp, Structure and friction of stearic acid and oleic acid films adsorbed on iron oxide surfaces in squalane, Langmuir, vol.30, pp.186-95, 2013.

D. Savio, N. Fillot, P. Vergne, H. Hetzler, W. Seemann et al., A Multiscale Study on the Wall Slip Effect in a Ceramic-Steel Contact With Nanometer-Thick Lubricant Film by a Nano-toElastohydrodynamic Lubrication Approach, Journal of Tribology, vol.137, p.31502, 2015.

A. Martini, Y. Liu, R. Q. Snurr, and Q. J. Wang, Molecular dynamics characterization of thin film viscosity for EHL simulation, Tribol Lett, vol.21, pp.217-242, 2006.

A. Vanossi, N. Manini, M. Urbakh, S. Zapperi, and E. Tosatti, Colloquium: Modeling friction: From nanoscale to mesoscale, Reviews of Modern Physics, vol.85, p.529, 2013.

G. Levita and M. C. Righi, Effects of Water Intercalation and Tribochemistry on MoS2 Lubricity: An Ab Initio Molecular Dynamics Investigation, ChemPhysChem, vol.18, pp.1475-80, 2017.

T. Onodera, J. M. Martin, C. Minfray, F. Dassenoy, and A. Miyamoto, Antiwear Chemistry of ZDDP: Coupling Classical MD and Tight-Binding Quantum Chemical MD Methods (TB-QCMD), Tribology Letters, vol.50, pp.31-40, 2013.

J. E. Jones, On the Determination of Molecular Fields. II. From the Equation of State of a Gas, Proc R Soc Lond A Math Phys Sci, vol.106, p.463, 1924.

P. M. Morse, Diatomic Molecules According to the Wave Mechanics, II. Vibrational Levels. Phys Rev, vol.34, pp.57-64, 1929.

B. Luan and M. O. Robbins, The breakdown of continuum models for mechanical contacts, Nature, vol.435, pp.929-961, 2005.

B. Luan and M. O. Robbins, Contact of single asperities with varying adhesion: Comparing continuum mechanics to atomistic simulations, Phys Rev E, vol.74, p.26111, 2006.

D. Heyes, E. Smith, D. Dini, H. Spikes, and T. Zaki, Pressure dependence of confined liquid behavior subjected to boundary-driven shear, J Chem Phys, vol.136, p.134705, 2012.

C. Gattinoni, D. M. Heyes, C. D. Lorenz, and D. Dini, Traction and nonequilibrium phase behavior of confined sheared liquids at high pressure, Physical Review E, vol.88, p.52406, 2013.

S. Ma?kowiak, D. Heyes, D. Dini, and A. Bra?ka, Non-equilibrium phase behavior and friction of confined molecular films under shear: A non-equilibrium molecular dynamics study, J Chem Phys, vol.145, p.164704, 2016.

S. B. Legoas, R. Giro, and D. S. Galvão, Molecular dynamics simulations of C 60 nanobearings, Chemical Physics Letters, vol.386, pp.425-434, 2004.

K. Matsushita, H. Matsukawa, and N. Sasaki, Atomic scale friction between clean graphite surfaces, Solid State Commun, vol.136, pp.51-56, 2005.
DOI : 10.1016/j.ssc.2005.05.052

URL : http://arxiv.org/pdf/cond-mat/0307474

T. Onodera, Y. Morita, A. Suzuki, M. Koyama, H. Tsuboi et al., A computational chemistry study on friction of h-MoS2. Part I. Mechanism of single sheet lubrication, The Journal of Physical Chemistry B, vol.113, pp.16526-16562, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01813954

J. P. Ewen, C. Gattinoni, N. Morgan, H. A. Spikes, and D. Dini, Nonequilibrium Molecular Dynamics Simulations of Organic Friction Modifiers Adsorbed on Iron Oxide Surfaces, Langmuir, vol.32, pp.4450-63, 2016.

M. S. Daw and M. I. Baskes, Embedded-atom method: Derivation and application to impurities, surfaces, and other defects in metals, Phys Rev B, vol.29, pp.6443-53, 1984.

A. Buldum, S. Ciraci, and I. P. Batra, Contact, nanoindentation, and sliding friction, Phys Rev B, vol.57, pp.2468-76, 1998.
DOI : 10.1103/physrevb.57.2468

URL : http://repository.bilkent.edu.tr/bitstream/11693/25342/1/Contact%2c%20nanoindentation%2c%20and%20sliding%20friction.pdf

D. Mulliah, S. D. Kenny, E. Mcgee, R. Smith, A. Richter et al., Atomistic modelling of ploughing friction in silver, iron and silicon, Nanotechnology, vol.17, p.1807, 2006.

R. Narulkar, S. Bukkapatnam, L. M. Raff, and R. Komanduri, Graphitization as a precursor to wear of diamond in machining pure iron: A molecular dynamics investigation, Computational Materials Science, vol.45, pp.358-66, 2009.

Y. Cao, J. Zhang, Y. Liang, F. Yu, and T. Sun, Mechanical and tribological properties of Ni/Al multilayers-A molecular dynamics study, Appl Surf Sci, vol.257, pp.847-51, 2010.

E. Lin, L. Niu, H. Shi, and Z. Duan, Molecular dynamics simulation of nano-scale interfacial friction characteristic for different tribopair systems, Appl Surf Sci, vol.258, pp.2022-2030, 2012.

L. Pauling, Atomic Radii and Interatomic Distances in Metals, J Am Chem Soc, vol.69, pp.542-53, 1947.

M. Finnis and J. Sinclair, A simple empirical N-body potential for transition metals, Philos Mag A, vol.50, pp.45-55, 1984.

J. Tersoff, New empirical approach for the structure and energy of covalent systems, Physical Review B, vol.37, p.6991, 1988.

D. W. Brenner, Empirical potential for hydrocarbons for use in simulating the chemical vapor deposition of diamond films, Physical Review B, vol.42, p.9458, 1990.

S. J. Stuart, A. B. Tutein, and J. A. Harrison, A reactive potential for hydrocarbons with intermolecular interactions, J Chem Phys, vol.112, pp.6472-86, 2000.
DOI : 10.1063/1.481208

A. C. Van-duin, S. Dasgupta, F. Lorant, and W. A. Goddard, ReaxFF: a reactive force field for hydrocarbons, The Journal of Physical Chemistry A, vol.105, pp.9396-409, 2001.

M. D. Perry and J. A. Harrison, Universal aspects of the atomic-scale friction of diamond surfaces, J Phys Chem, vol.99, pp.9960-9965, 1995.

J. Servantie and P. Gaspard, Translational dynamics and friction in double-walled carbon nanotubes, Physical Review B, vol.73, p.125428, 2006.
DOI : 10.1103/physrevb.73.125428

URL : http://arxiv.org/pdf/cond-mat/0606234

G. Gao, R. J. Cannara, R. W. Carpick, and J. A. Harrison, Atomic-scale friction on diamond: a comparison of different sliding directions on (001) and (111) surfaces using MD and AFM, Langmuir, vol.23, pp.5394-405, 2007.

H. Kim and D. Kim, Molecular dynamics simulation of atomic-scale frictional behavior of corrugated nano-structured surfaces, Nanoscale, vol.4, pp.3937-3981, 2012.

P. Stoyanov, P. Stemmer, T. T. Järvi, R. Merz, P. A. Romero et al., Friction and wear mechanisms of tungsten-carbon systems: A comparison of dry and lubricated conditions, ACS Applied Materials & Interfaces, vol.5, pp.6123-6158, 2013.

W. Sawyer, S. Perry, S. Phillpot, and S. Sinnott, Integrating experimental and simulation length and time scales in mechanistic studies of friction, Journal of Physics: Condensed Matter, vol.20, p.354012, 2008.

P. Huang, Atomistic simulations of shearing friction and dynamic adhesion of double-walled carbon nanotubes on Au substrates, Composites Sci Technol, vol.72, pp.599-607, 2012.

J. Wen, T. Ma, W. Zhang, G. Psofogiannakis, A. C. Van-duin et al., Atomic insight into tribochemical wear mechanism of silicon at the Si/SiO 2 interface in aqueous environment: Molecular dynamics simulations using ReaxFF reactive force field, Appl Surf Sci, vol.390, pp.216-239, 2016.

J. Yeon, X. He, A. Martini, and S. H. Kim, Mechanochemistry at solid surfaces: Polymerization of adsorbed molecules by mechanical shear at tribological interfaces, ACS Applied Materials & Interfaces, vol.9, pp.3142-3150, 2017.

C. Campaná and M. H. Müser, Practical Green's function approach to the simulation of elastic semiinfinite solids, Physical Review B, vol.74, p.75420, 2006.

L. T. Kong, G. Bartels, C. Campañá, C. Denniston, and M. H. Müser, Implementation of Green's function molecular dynamics: An extension to LAMMPS, Comput Phys Commun, vol.180, pp.1004-1014, 2009.

M. I. De-barros-bouchet, C. Matta, B. Vacher, T. Le-mogne, J. M. Martin et al., Energy filtering transmission electron microscopy and atomistic simulations of tribo-induced hybridization change of nanocrystalline diamond coating, Carbon, vol.87, pp.317-346, 2015.

S. Loehle, C. Matta, C. Minfray, L. Mogne, T. Martin et al., Mixed Lubrication with C18 Fatty Acids: Effect of Unsaturation, Tribology Letters, vol.53, pp.319-347, 2014.

D. Barros-bouchet, M. I. Righi, M. C. Philippon, D. Mambingo-doumbe, S. Le-mogne et al., Tribochemistry of phosphorus additives: experiments and first-principles calculations, RSC Adv, vol.5, pp.49270-49279, 2015.

L. Pastewka, A. Klemenz, P. Gumbsch, and M. Moseler, Screened empirical bond-order potentials for Si-C, Phys Rev B, vol.87, p.205410, 2013.

S. Loehlé, C. Matta, C. Minfray, T. L. Mogne, R. Iovine et al., Mixed lubrication of steel by C18 fatty acids revisited. Part I: Toward the formation of carboxylate, Tribol Int, vol.82, pp.218-245, 2015.

G. Levita, A. Cavaleiro, E. Molinari, T. Polcar, and M. Righi, Sliding properties of MoS2 layers: load and interlayer orientation effects, The Journal of Physical Chemistry C, vol.118, pp.13809-13825, 2014.

P. Wriggers and J. Reinelt, Multi-scale approach for frictional contact of elastomers on rough rigid surfaces, Comput Methods Appl Mech Eng, vol.198, pp.1996-2008, 2009.

M. Ciavarella and G. Demelio, Elastic multiscale contact of rough surfaces: Archard's model revisited and comparisons with modern fractal models, RN, vol.3, issue.2, 2001.

M. Borri-brunetto, A. Carpinteri, and B. Chiaia, Scaling phenomena due to fractal contact in concrete and rock fractures, Int J Fract, vol.95, p.221, 1999.

G. Zavarise, M. Borri-brunetto, and M. Paggi, On the resolution dependence of micromechanical contact models, Wear, vol.262, pp.42-54, 2007.

S. Cheng and M. O. Robbins, Defining Contact at the Atomic Scale, Tribology Letters, vol.39, pp.329-377, 2010.
DOI : 10.1007/s11249-010-9682-5

URL : https://vtechworks.lib.vt.edu/bitstream/10919/75167/1/Cheng10.arXiv.contact.area.pdf

L. Pastewka, T. A. Sharp, and M. O. Robbins, Seamless elastic boundaries for atomistic calculations, Physical Review B, vol.86, p.75459, 2012.

G. Anciaux, S. B. Ramisetti, and J. Molinari, A finite temperature bridging domain method for MD-FE coupling and application to a contact problem, Comput Methods Appl Mech Eng, vol.205, pp.204-216, 2012.

P. R. Budarapu, J. Reinoso, and M. Paggi, Concurrently coupled solid shell-based adaptive multiscale method for fracture, Comput Methods Appl Mech Eng, vol.319, pp.338-65, 2017.
DOI : 10.1016/j.cma.2017.02.023

URL : https://doi.org/10.1016/j.cma.2017.02.023

L. Shilkrot, R. E. Miller, and W. A. Curtin, Multiscale plasticity modeling: coupled atomistics and discrete dislocation mechanics, J Mech Phys Solids, vol.52, pp.755-87, 2004.
DOI : 10.1016/j.jmps.2003.09.023

K. Siang and L. Nicola, Discrete dislocation plasticity analysis of contact between deformable bodies of simple geometry, Modell Simul Mater Sci Eng, vol.24, p.45008, 2016.

H. Chang, M. Fivel, D. Rodney, and M. Verdier, Multiscale modelling of indentation in FCC metals: From atomic to continuum, Comptes Rendus Physique, vol.11, pp.285-92, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00542903

J. Y. Murthy, S. V. Narumanchi, &. Jose, T. Wang, C. Ni et al., Review of multiscale simulation in submicron heat transfer, International Journal for Multiscale Computational Engineering, vol.3, 2005.

D. Savio, L. Pastewka, and P. Gumbsch, Boundary lubrication of heterogeneous surfaces and the onset of cavitation in frictional contacts, Science advances, vol.2, p.1501585, 2016.

J. Cho, J. Molinari, and G. Anciaux, Mobility law of dislocations with several character angles and temperatures in FCC aluminum, Int J Plast, vol.90, pp.66-75, 2017.

J. Cho, T. Junge, J. Molinari, and G. Anciaux, Toward a 3D coupled atomistic and discrete dislocation dynamics simulation: dislocation core structures and Peierls stresses with several character angles in FCC aluminum, Advanced Modeling and Simulation in Engineering Sciences, vol.2, p.12, 2015.

E. Smith, D. Heyes, D. Dini, and T. Zaki, Control-volume representation of molecular dynamics, Physical Review E, vol.85, p.56705, 2012.

E. Smith, D. Heyes, D. Dini, and T. Zaki, A localized momentum constraint for non-equilibrium molecular dynamics simulations, J Chem Phys, vol.142, p.74110, 2015.

E. Flekkøy, G. Wagner, and J. Feder, Hybrid model for combined particle and continuum dynamics, Europhysics Letters), vol.52, p.271, 2000.

X. Nie, S. Chen, and M. O. Robbins, A continuum and molecular dynamics hybrid method for microand nano-fluid flow, J Fluid Mech, vol.500, pp.55-64, 2004.

W. Ren, Analytical and numerical study of coupled atomistic-continuum methods for fluids, Journal of Computational Physics, vol.227, pp.1353-71, 2007.

F. Yamashita, E. Fukuyama, K. Mizoguchi, S. Takizawa, S. Xu et al., Scale dependence of rock friction at high work rate, Nature, vol.528, pp.254-261, 2015.

T. Hatano, Scaling properties of granular rheology near the jamming transition, Journal of the Physical Society of Japan, vol.77, p.123002, 2008.

M. P. Szolwinski, G. Harish, T. N. Farris, and T. Sakagami, Situ Measurement of Near-Surface Fretting Contact Temperatures in an Aluminum Alloy, Journal of Tribology, vol.121, pp.11-20, 1999.

J. Scheibert, A. Prevost, J. Frelat, P. Rey, and G. Debrégeas, Experimental evidence of non-Amontons behaviour at a multi-contact interface, Europhysics Letters, vol.83, p.34003, 2008.

J. Scheibert, A. Prevost, G. Debrégeas, E. Katzav, and M. Adda-bedia, Stress field at a sliding frictional contact: Experiments and calculations, J Mech Phys Solids, vol.57, pp.1921-1954, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00331860

J. H. Dieterich and B. D. Kilgore, Direct observation of frictional contacts: New insights for statedependent properties, Pure Appl Geophys, vol.143, pp.283-302, 1994.

E. Bayart, I. Svetlizky, and J. Fineberg, Fracture mechanics determine the lengths of interface ruptures that mediate frictional motion, Nat Phys, vol.12, pp.166-70, 2016.

D. S. Kammer, M. Radiguet, J. Ampuero, and J. Molinari, Linear Elastic Fracture Mechanics Predicts the Propagation Distance of Frictional Slip, Tribology Letters, vol.57, p.23, 2015.

D. T. Nguyen, P. Paolino, A. M. Chateauminois, A. Frétigny, C. et al., Surface pressure and shear stress fields within a frictional contact on rubber, The Journal of Adhesion, vol.87, pp.235-50, 2011.

K. Woo and T. Thomas, Contact of rough surfaces: a review of experimental work, Wear, vol.58, pp.331-371, 1980.

B. Lorenz and B. N. Persson, Leak rate of seals: Effective-medium theory and comparison with experiment, The European Physical Journal E: Soft Matter and Biological Physics, vol.31, pp.159-67, 2010.

C. Putignano, T. Reddyhoff, G. Carbone, and D. Dini, Experimental investigation of viscoelastic rolling contacts: a comparison with theory, Tribology Letters, vol.51, pp.105-118, 2013.

G. Carbone and C. Putignano, Rough viscoelastic sliding contact: theory and experiments, Physical Review E, vol.89, p.32408, 2014.

F. Hild and S. Roux, Digital Image Correlation: from Displacement Measurement to Identification of Elastic Properties â?" a Review, Strain, vol.42, pp.69-80, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00013816

R. Usamentiaga, P. Venegas, J. Guerediaga, L. Vega, J. Molleda et al., Infrared Thermography for Temperature Measurement and Non-Destructive Testing, Sensors, vol.14, 2014.

K. Schwab, E. Henriksen, J. Worlock, and M. L. Roukes, Measurement of the quantum of thermal conductance, Nature, vol.404, pp.974-981, 2000.

G. Chen, Ballistic-diffusive heat-conduction equations, Phys Rev Lett, vol.86, p.2297, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00116900

G. Anciaux and J. Molinari, A molecular dynamics and finite elements study of nanoscale thermal contact conductance, Int J Heat Mass Transfer, vol.59, pp.384-92, 2013.

C. Madhusudana, Thermal contact conductance, 1996.

F. P. Bowden and D. Tabor, The friction and lubrication of solids, 2001.

J. R. Rice, Heating and weakening of faults during earthquake slip, Journal of Geophysical Research: Solid Earth, vol.111, 2006.

D. L. Goldsby and T. E. Tullis, Flash heating leads to low frictional strength of crustal rocks at earthquake slip rates, Science, vol.334, pp.216-224, 2011.

A. Ramesh and S. N. Melkote, Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel, Int J Mach Tools Manuf, vol.48, pp.402-416, 2008.

I. Ward and P. Hine, The science and technology of hot compaction, Polymer, vol.45, pp.1413-1440, 2004.

J. H. Dieterich, Time-dependent friction in rocks, Journal of Geophysical Research, vol.77, pp.3690-3697, 1972.

C. Collettini, C. Viti, T. Tesei, and S. Mollo, Thermal decomposition along natural carbonate faults during earthquakes, Geology, vol.41, pp.927-957, 2013.

W. Dresel, Lubricants and lubrication, 2007.

H. K. Müller and B. S. Nau, Fluid sealing technology: principles and applictions, 1998.

W. Power and W. Durham, Topography of natural and artificial fractures in granitic rocks: Implications for studies of rock friction and fluid migration, Int J Rock Mech Min Sci, vol.34, pp.979-89, 1997.

K. Rajagopal and A. Szeri, On an inconsistency in the derivation of the equations of elastohydrodynamic lubrication, vol.459, pp.2771-86, 2003.

G. Zilibotti, S. Corni, and M. Righi, Load-induced confinement activates diamond lubrication by water, Phys Rev Lett, vol.111, p.146101, 2013.

W. B. Dapp, A. Lücke, B. Persson, and M. H. Müser, Self-Affine Elastic Contacts: Percolation and Leakage, Phys Rev Lett, vol.108, p.244301, 2012.

J. R. Barber, Bounds on the electrical resistance between contacting elastic rough bodies, Proceedings of the Royal Society of London.Series A: Mathematical, Physical and Engineering Sciences, vol.459, p.53, 2003.

B. Persson, On the Fractal Dimension of Rough Surfaces, Tribol Lett, vol.54, pp.99-106, 2014.

Y. Z. Hu and K. Tonder, Simulation of 3-D random rough surface by 2-D digital filter and fourier analysis, International Journal of Machine Tools and Manufacture, vol.32, pp.83-90, 1992.

P. Meakin, Fractals, scaling and growth far from equilibrium, 1998.

A. Y. Suh, A. A. Polycarpou, and T. F. Conry, Detailed surface roughness characterization of engineering surfaces undergoing tribological testing leading to scuffing, Wear, vol.255, pp.556-68, 2003.

R. Deltombe, K. Kubiak, and M. Bigerelle, How to select the most relevant 3D roughness parameters of a surface, Scanning, vol.36, pp.150-60, 2014.

D. J. Whitehouse and J. F. Archard, The Properties of Random Surfaces of Significance in their Contact, Proc R Soc Lond A Math Phys Sci, vol.316, p.97, 1970.

R. S. Sayles and T. R. Thomas, Surface topography as a nonstationary random process, Nature, vol.271, pp.431-435, 1978.

F. Bowden and D. Tabor, The influence of surface films on the friction and deformation of surfaces in Properties of Metallic Surfaces, Institute of Metals, pp.197-212, 1953.

P. R. Guduru, Detachment of a rigid solid from an elastic wavy surface: theory, J Mech Phys Solids, vol.55, pp.445-72, 2007.

F. M. Borodich, A. Pepelyshev, and O. Savencu, Statistical approaches to description of rough engineering surfaces at nano and microscales, Tribol Int, vol.103, pp.197-207, 2016.

M. Ciavarella and A. Papangelo, A modified form of Pastewka-Robbins criterion for adhesion, The Journal of Adhesion, vol.94, pp.155-65, 2017.

M. Ciavarella, On Pastewka and Robbins' Criterion for Macroscopic Adhesion of Rough Surfaces, Journal of Tribology, vol.139, p.31404, 2017.

T. D. Jacobs and A. Martini, Measuring and understanding contact area at the nanoscale: a review, Appl Mech Rev, vol.69, p.61101, 2017.

M. Ciavarella, A. Papangelo, T. Jacobs, and M. , Discussion of "Measuring and Understanding Contact Area at the Nanoscale: A Review, ASME Appl. Mech. Rev, vol.69, issue.6, 2017.

, Appl Mech Rev, vol.69, p.65502, 2017.

M. Ciavarella and A. Papangelo, On the sensitivity of adhesion between rough surfaces to asperity height distribution, Physical Mesomechanics, vol.21, pp.59-66, 2018.

M. P. Rapetto, A. Almqvist, R. Larsson, and P. M. Lugt, On the influence of surface roughness on real area of contact in normal, dry, friction free, rough contact by using a neural network, Wear, vol.266, pp.592-597, 2009.

S. Solhjoo and A. I. Vakis, Surface roughness of gold substrates at the nanoscale: an atomistic simulation study, Tribology International, vol.2017, pp.165-78

J. Krim and G. Palasantzas, Experimental observations of self-affine scaling and kinetic roughening at sub-micron lengthscales, International Journal of Modern Physics B, vol.9, pp.599-632, 1995.

E. J. Abbott and F. A. Firestone, Specifying surface quality, Mech Eng, vol.65, pp.569-72, 1933.

X. Jiang, P. J. Scott, D. J. Whitehouse, and L. Blunt, Paradigm shifts in surface metrology. Part I. Historical philosophy, vol.463, pp.2049-70, 2007.

X. Jiang, P. J. Scott, D. J. Whitehouse, and L. Blunt, Paradigm shifts in surface metrology. Part II. The current shift, vol.463, pp.2071-99, 2007.

F. Gao, R. K. Leach, J. Petzing, and J. M. Coupland, Surface measurement errors using commercial scanning white light interferometers, Measurement Science and Technology, vol.19, p.15303, 2007.

U. Schwarz, H. Haefke, P. Reimann, and . Güntherodt-h, Tip artefacts in scanning force microscopy, J Microsc, vol.173, pp.183-97, 1994.

F. Lechenault, G. Pallares, M. George, C. Rountree, E. Bouchaud et al., Effects of finite probe size on self-affine roughness measurements, Phys Rev Lett, vol.104, p.25502, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00534475

A. Almqvist, E. K. Essel, L. Persson, and P. Wall, Homogenization of the unstationary incompressible Reynolds equation, Tribol Int, vol.40, pp.1344-50, 2007.

C. Y. Poon and B. Bhushan, Comparison of surface roughness measurements by stylus profiler, AFM and non-contact optical profiler, Wear, vol.190, pp.76-88, 1995.

A. Spencer, I. Dobryden, N. Almqvist, A. Almqvist, and R. Larsson, The influence of AFM and VSI techniques on the accurate calculation of tribological surface roughness parameters, Tribol Int, vol.57, pp.242-50, 2013.

G. Anciaux and J. Molinari, Contact mechanics at the nanoscale, a 3D multiscale approach, Int J Numer Methods Eng, vol.79, pp.1041-67, 2009.

S. Solhjoo and A. I. Vakis, Single asperity nanocontacts: Comparison between molecular dynamics simulations and continuum mechanics models, Comp Mater Sci, vol.99, pp.209-229, 2015.

S. Solhjoo and A. I. Vakis, Definition and detection of contact in atomistic simulations, Computational Materials Science, vol.109, pp.172-82, 2015.

R. Sahli, G. Pallares, C. Ducottet, B. Ali, I. E. et al., Evolution of real contact area under shear and the value of static friction of soft materials, Proc Natl Acad Sci U S A, vol.115, pp.471-477, 2018.
URL : https://hal.archives-ouvertes.fr/ujm-01789539

N. Yu and A. A. Polycarpou, Adhesive contact based on the Lennard-Jones potential: A correction to the value of the equilibrium distance as used in the potential, J Colloid Interface Sci, vol.278, pp.428-463, 2004.

L. Pastewka and M. O. Robbins, Contact area of rough spheres: Large scale simulations and simple scaling laws, Appl Phys Lett, vol.108, p.221601, 2016.

K. J. Taylor, C. L. Pettiette-hall, O. Cheshnovsky, and R. E. Smalley, Ultraviolet photoelectron spectra of coinage metal clusters, J Chem Phys, vol.96, pp.3319-3348, 1992.

G. Mills, M. S. Gordon, and H. Metiu, Oxygen adsorption on Au clusters and a rough Au(111) surface: The role of surface flatness, electron confinement, excess electrons, and band gap, J Chem Phys, vol.118, pp.4198-205, 2003.

M. L. Gee, P. M. Mcguiggan, J. N. Israelachvili, and A. M. Homola, Liquid to solidlike transitions of molecularly thin films under shear, J Chem Phys, vol.93, pp.1895-906, 1990.

U. Landman, W. D. Luedtke, and J. Gao, Atomic-Scale Issues in Tribology: Interfacial Junctions and Nano-elastohydrodynamics, Langmuir, vol.12, pp.4514-4542, 1996.

A. L. Demirel and S. Granick, Origins of solidification when a simple molecular fluid is confined between two plates, J Chem Phys, vol.115, pp.1498-512, 2001.

D. Savio, N. Fillot, and P. Vergne, A Molecular Dynamics Study of the Transition from Ultra-Thin Film Lubrication Toward Local Film Breakdown, Tribol Lett, vol.50, pp.207-227, 2013.

K. Fukuzawa, S. Itoh, and Y. Mitsuya, Fiber wobbling shear force measurement for nanotribology of confined lubricant molecules, IEEE Trans Magn, vol.39, pp.2453-2458, 2003.

S. Itoh, K. Fukuzawa, Y. Hamamoto, Z. Hedong, and Y. Mitsuya, Fiber wobbling method for dynamic viscoelastic measurement of liquid lubricant confined in molecularly narrow gaps, Tribol Lett, vol.30, pp.177-89, 2008.

A. I. Vakis, M. Eriten, and A. A. Polycarpou, Modeling Bearing and Shear Forces in Molecularly Thin Lubricants, Tribol Lett, vol.41, pp.573-86, 2011.

J. E. Williams and . Tribology, , 2005.

A. J. Goldman, R. G. Cox, and H. Brenner, Slow viscous motion of a sphere parallel to a plane wall--II Couette flow, Chem Eng Sci, vol.22, pp.653-60, 1967.

K. Fukuzawa, K. Hayakawa, N. Matsumura, S. Itoh, and H. Zhang, Simultaneously Measuring Lateral and Vertical Forces with Accurate Gap Control for Clarifying Lubrication Phenomena at Nanometer Gap, Tribol Lett, vol.37, pp.497-505, 2009.

L. Nicola, A. F. Bower, K. Kim, A. Needleman, and E. Van-der-giessen, Multi-asperity contact: A comparison between discrete dislocation and crystal plasticity predictions, Philosophical Magazine, vol.88, pp.3713-3742, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00513992

H. Li, Z. Jiang, and D. Wei, Crystal plasticity finite modelling of 3D surface asperity flattening in uniaxial planar compression, Tribology Letters, vol.46, pp.101-113, 2012.

P. A. Sabnis, S. Forest, N. K. Arakere, and V. A. Yastrebov, Crystal plasticity analysis of cylindrical indentation on a Ni-base single crystal superalloy, Int J Plast, vol.51, pp.200-217, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00904140

E. Renner, Y. Gaillard, F. Richard, F. Amiot, and P. Delobelle, Sensitivity of the residual topography to single crystal plasticity parameters in Berkovich nanoindentation on FCC nickel, Int J Plast, vol.77, pp.118-158, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01256237

Y. Liu, S. Varghese, J. Ma, M. Yoshino, H. Lu et al., Orientation effects in nanoindentation of single crystal copper, Int J Plast, vol.24, pp.1990-2015, 2008.

S. Kucharski, S. Stupkiewicz, and H. Petryk, Surface pile-up patterns in indentation testing of Cu single crystals, Exp Mech, vol.54, pp.957-69, 2014.

Y. Wang, D. Raabe, C. Klüber, and F. Roters, Orientation dependence of nanoindentation pile-up patterns and of nanoindentation microtextures in copper single crystals, Acta Materialia, vol.52, pp.2229-2267, 2004.

W. D. Nix and H. Gao, Indentation size effects in crystalline materials: a law for strain gradient plasticity, J Mech Phys Solids, vol.46, pp.411-436, 1998.

G. M. Pharr, E. G. Herbert, and Y. Gao, The indentation size effect: a critical examination of experimental observations and mechanistic interpretations, Annual Review of Materials Research, vol.40, pp.271-92, 2010.

M. E. Gurtin, On the plasticity of single crystals: free energy, microforces, plastic-strain gradients, J Mech Phys Solids, vol.48, pp.989-1036, 2000.

L. Evers, W. Brekelmans, and M. Geers, Non-local crystal plasticity model with intrinsic SSD and GND effects, J Mech Phys Solids, vol.52, pp.2379-401, 2004.

C. Han, H. Gao, Y. Huang, and W. D. Nix, Mechanism-based strain gradient crystal plasticity-I. Theory, J Mech Phys Solids, vol.53, pp.1188-203, 2005.
DOI : 10.1007/978-1-4020-4946-0_17

H. Petryk and S. Stupkiewicz, A minimal gradient-enhancement of the classical continuum theory of crystal plasticity. Part I: The hardening law, Archives of Mechanics, vol.68, pp.459-85, 2016.

W. Lee and Y. Chen, Simulation of micro-indentation hardness of FCC single crystals by mechanism-based strain gradient crystal plasticity, Int J Plast, vol.26, pp.1527-1567, 2010.

S. Stupkiewicz and H. Petryk, A minimal gradient-enhancement of the classical continuum theory of crystal plasticity. Part II: Size effects, Archives of Mechanics, vol.68, pp.487-513, 2016.

H. Song, E. Van-der-giessen, and X. Liu, Strain gradient plasticity analysis of elasto-plastic contact between rough surfaces, J Mech Phys Solids, vol.96, pp.18-28, 2016.
DOI : 10.1016/j.jmps.2016.07.008

URL : http://dspace.imech.ac.cn/bitstream/311007/59941/1/IMCAS-J2016-316.pdf

M. Fivel, C. Robertson, G. Canova, and L. Boulanger, Three-dimensional modeling of indent-induced plastic zone at a mesoscale, Acta Materialia, vol.46, pp.6183-94, 1998.

F. Sun, E. Van-der-giessen, and N. L. , Interaction between neighboring asperities during flattening: A discrete dislocation plasticity analysis, Mech Mater, vol.90, pp.157-65, 2015.
DOI : 10.1016/j.mechmat.2015.04.012

X. Yin and K. Komvopoulos, A discrete dislocation plasticity analysis of a single-crystal semiinfinite medium indented by a rigid surface exhibiting multi-scale roughness, Philosophical Magazine, vol.92, pp.2984-3005, 2012.

V. Deshpande, A. Needleman, and E. Van-der-giessen, Discrete dislocation plasticity analysis of static friction, Acta materialia, vol.52, pp.3135-3184, 2004.

H. Song, A. I. Vakis, X. Liu, and E. Van-der-giessen, Statistical model of rough surface contact accounting for size-dependent plasticity and asperity interaction, Journal of the Mechanics and Physics of Solids, vol.106, pp.1-14, 2017.

R. Raj and M. Ashby, On grain boundary sliding and diffusional creep, Metallurgical and Materials Transactions B, vol.2, pp.1113-1140, 1971.
DOI : 10.1007/bf02664244

H. Van-swygenhoven and P. Derlet, Grain-boundary sliding in nanocrystalline fcc metals, Physical Review B, vol.64, p.224105, 2001.

N. Argibay, M. Chandross, S. Cheng, and J. R. Michael, Linking microstructural evolution and macroscale friction behavior in metals, J Mater Sci, vol.52, pp.2780-99, 2017.

P. Stoyanov, P. A. Romero, T. T. Järvi, L. Pastewka, M. Scherge et al., Experimental and numerical atomistic investigation of the third body formation process in dry tungsten/tungsten-carbide tribo couples, Tribology Letters, vol.50, pp.67-80, 2013.

S. Bosheh and P. Mativenga, White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling, Int J Mach Tools Manuf, vol.46, pp.225-258, 2006.

S. Ranganath, C. Guo, and P. Hegde, A finite element modeling approach to predicting white layer formation in nickel superalloys, CIRP Annals-Manufacturing Technology, vol.58, pp.77-80, 2009.

M. Lindroos, V. Ratia, M. Apostol, K. Valtonen, A. Laukkanen et al., The effect of impact conditions on the wear and deformation behavior of wear resistant steels, Wear, vol.328, pp.197-205, 2015.

A. Wang and M. H. Müser, Gauging Persson theory on adhesion, Tribology Letters, vol.65, p.103, 2017.

K. Nagata, M. Nakatani, and S. Yoshida, A revised rate-and state-dependent friction law obtained by constraining constitutive and evolution laws separately with laboratory data, Journal of Geophysical Research: Solid Earth, vol.117, 2012.

G. Stachowiak and A. W. Batchelor, Engineering tribology, 2013.

L. Prandtl, Ein Gedankenmodell zur kinetischen Theorie der festen Körper, ZAMM-Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, vol.8, pp.85-106, 1928.

M. H. Muser, M. Urbakh, and M. O. Robbins, Statistical mechanics of static and low-velocity kinetic friction, Advances in Chemical Physics, vol.126, pp.187-272, 2003.

A. Cammarata and T. Polcar, Tailoring Nanoscale Friction in MX2 Transition Metal Dichalcogenides, Inorg Chem, vol.54, pp.5739-5783, 2015.

S. M. Rubinstein, G. Cohen, and J. Fineberg, Detachment fronts and the onset of dynamic friction, Nature, vol.430, pp.1005-1014, 2004.

J. K. Trømborg, H. A. Sveinsson, J. Scheibert, K. Thøgersen, and D. S. Amundsen, Malthe-Sørenssen A. Slow slip and the transition from fast to slow fronts in the rupture of frictional interfaces, Proceedings of the National Academy of Sciences, vol.111, pp.8764-8773, 2014.

A. Prevost, J. Scheibert, and G. Debrégeas, Probing the micromechanics of a multi-contact interface at the onset of frictional sliding, The European Physical Journal E, vol.36, p.17, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00322643

M. Paggi, R. Pohrt, and V. L. Popov, Partial-slip frictional response of rough surfaces, Scientific reports, vol.4, p.5178, 2014.

C. A. Coulomb, Théorie des machines simples en ayant égard au frottement de leurs parties et à la roideur des cordages, p.1821

Y. Bar-sinai, R. Spatschek, E. A. Brener, and E. Bouchbinder, On the velocity-strengthening behavior of dry friction, Journal of Geophysical Research: Solid Earth, vol.119, pp.1738-1786, 2014.

E. Popova and V. L. Popov, The research works of Coulomb and Amontons and generalized laws of friction, Friction, vol.3, pp.183-90, 2015.

G. Adams, Radiation of body waves induced by the sliding of an elastic half-space against a rigid surface, Journal of applied mechanics, vol.67, pp.1-5, 2000.

O. Ben-david and J. Fineberg, Static Friction Coefficient Is Not a Material Constant, Phys Rev Lett, vol.106, p.254301, 2011.

O. Ben-david, S. M. Rubinstein, and J. Fineberg, Slip-stick and the evolution of frictional strength, Nature, vol.463, pp.76-85, 2010.

J. Scheibert and D. K. Dysthe, Role of friction-induced torque in stick-slip motion, Europhysics Letters), vol.92, p.54001, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00489886

M. Otsuki and H. Matsukawa, Systematic Breakdown of Amontons' Law of Friction for an Elastic Object Locally Obeying Amontons, Law. Scientific Reports, vol.3, p.1586, 2013.

Z. Farkas, S. R. Dahmen, and D. E. Wolf, Static versus dynamic friction: the role of coherence, Journal of Statistical Mechanics: Theory and Experiment, p.6015, 2005.

T. Baumberger and C. Caroli, Solid friction from stick-slip down to pinning and aging, Adv Phys, vol.55, pp.279-348, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01280967

C. Marone, Laboratory-derived friction laws and their application to seismic faulting, Annu Rev Earth Planet Sci, vol.26, pp.643-96, 1998.

O. Ronsin and K. L. Coeyrehourcq, State, rate and temperature-dependent sliding friction of elastomers, vol.457, pp.1277-94, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00125567

L. Bureau, T. Baumberger, and C. Caroli, Rheological aging and rejuvenation in solid friction contacts, The European Physical Journal E, vol.8, pp.331-338, 2002.

Q. Li, T. E. Tullis, D. Goldsby, and R. W. Carpick, Frictional ageing from interfacial bonding and the origins of rate and state friction, Nature, vol.480, p.233, 2011.

J. D. Mcgraw, A. Niguès, A. Chennevière, and A. Siria, Contact dependence and velocity crossover in friction between microscopic solid/solid contacts, Nano letters, vol.17, pp.6335-6344, 2017.

D. Toro, G. Han, R. Hirose, T. , D. Paola et al., Fault lubrication during earthquakes, Nature, vol.471, pp.494-502, 2011.

S. Rubinstein, G. Cohen, and J. Fineberg, Dynamics of precursors to frictional sliding, Phys Rev Lett, vol.98, p.226103, 2007.

O. Ben-david, G. Cohen, and J. Fineberg, The Dynamics of the Onset of Frictional Slip, Science, vol.330, p.211, 2010.

I. Svetlizky and J. Fineberg, Classical shear cracks drive the onset of dry frictional motion, Nature, vol.509, pp.205-213, 2014.

I. Svetlizky, D. Pino-muñoz, M. Radiguet, D. S. Kammer, J. Molinari et al., Properties of the shear stress peak radiated ahead of rapidly accelerating rupture fronts that mediate frictional slip, Proceedings of the National Academy of Sciences, vol.113, pp.542-549, 2016.

C. Caroli and P. Nozieres, Hysteresis and elastic interactions of microasperities in dry friction, The European Physical Journal B-Condensed Matter and Complex Systems, vol.4, pp.233-279, 1998.

O. Braun, I. Barel, and M. Urbakh, Dynamics of transition from static to kinetic friction, Phys Rev Lett, vol.103, p.194301, 2009.

S. Maegawa, A. Suzuki, and K. Nakano, Precursors of Global Slip in a Longitudinal Line Contact Under Non-Uniform Normal Loading, Tribology Letters, vol.38, pp.313-336, 2010.

D. S. Amundsen, J. Scheibert, K. Thøgersen, J. Trømborg, and A. Malthe-sørenssen, 1D model of precursors to frictional stick-slip motion allowing for robust comparison with experiments, Tribology Letters, vol.45, pp.357-69, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00640006

O. Braun and J. Scheibert, Propagation length of self-healing slip pulses at the onset of sliding: a toy model, Tribology Letters, vol.56, pp.553-62, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01088873

A. Papangelo, B. Stingl, N. P. Hoffmann, and M. Ciavarella, A simple model for friction detachment at an interface of finite size mimicking Fineberg's experiments on uneven loading, Physical Mesomechanics, vol.17, pp.311-331, 2014.

J. Trømborg, J. Scheibert, D. S. Amundsen, K. Thøgersen, and A. Malthe-sørenssen, Transition from Static to Kinetic Friction: Insights from a 2D Model, Phys Rev Lett, vol.107, p.74301, 2011.

M. Radiguet, D. S. Kammer, P. Gillet, and J. Molinari, Survival of Heterogeneous Stress Distributions Created by Precursory Slip at Frictional Interfaces, Phys Rev Lett, vol.111, p.164302, 2013.

A. Taloni, A. Benassi, S. Sandfeld, and S. Zapperi, Scalar model for frictional precursors dynamics, Scientific Reports, vol.5, p.8086, 2014.
DOI : 10.1038/srep08086

URL : https://www.nature.com/articles/srep08086.pdf

C. H. Scholz, The mechanics of earthquakes and faulting, 2002.

D. S. Amundsen, J. K. Trømborg, K. Thøgersen, E. Katzav, A. Malthe-sørenssen et al., Steady-state propagation speed of rupture fronts along one-dimensional frictional interfaces, Physical Review E, vol.92, p.32406, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01203800

A. Chateauminois, C. Frétigny, and L. Olanier, Friction and shear fracture of an adhesive contact under torsion, Phys Rev E, vol.81, p.26106, 2010.

Y. Bar-sinai, E. A. Brener, and E. Bouchbinder, Slow rupture of frictional interfaces, Geophys Res Lett, vol.39, 2012.

Y. Bar-sinai, R. Spatschek, E. A. Brener, and E. Bouchbinder, Instabilities at frictional interfaces: Creep patches, nucleation, and rupture fronts, Physical Review E, vol.88, p.60403, 2013.

B. M. Kaproth and C. Marone, Slow earthquakes, preseismic velocity changes, and the origin of slow frictional stick-slip, Science, vol.341, pp.1229-1261, 2013.

J. K. Trømborg, H. A. Sveinsson, K. Thøgersen, J. Scheibert, and A. Malthe-sørenssen, Speed of fast and slow rupture fronts along frictional interfaces, Physical Review E, vol.92, p.12408, 2015.

K. Thøgersen, J. K. Trømborg, H. A. Sveinsson, A. Malthe-sørenssen, and J. Scheibert, Historydependent friction and slow slip from time-dependent microscopic junction laws studied in a statistical framework, Physical Review E, vol.89, p.52401, 2014.

K. Grosch, The relation between the friction and visco-elastic properties of rubber, vol.274, pp.21-39, 1963.

B. Persson, O. Albohr, U. Tartaglino, A. I. Volokitin, and E. Tosatti, On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion, Journal of Physics: Condensed Matter, vol.17, p.1, 2005.

A. J. Tuononen, Digital image correlation to analyse stick-slip behaviour of tyre tread block, Tribol Int, vol.69, pp.70-76, 2014.

A. J. Tuononen, Onset of frictional sliding of rubber-glass contact under dry and lubricated conditions, Sci Rep, vol.6, p.27951, 2016.

A. Chateauminois and C. Frétigny, Local friction at a sliding interface between an elastomer and a rigid spherical probe, The European Physical Journal E: Soft Matter and Biological Physics, vol.27, pp.221-228, 2008.

M. Audry, C. Frétigny, A. Chateauminois, J. Teissere, and E. Barthel, Slip dynamics at a patterned rubber/glass interface during stick-slip motions, The European Physical Journal E: Soft Matter and Biological Physics, vol.35, pp.1-7, 2012.
DOI : 10.1140/epje/i2012-12083-0

URL : https://hal.archives-ouvertes.fr/hal-00731424

K. Brörmann, I. Barel, M. Urbakh, and R. Bennewitz, Friction on a microstructured elastomer surface, Tribology Letters, vol.50, pp.3-15, 2013.

J. A. Greenwood and J. H. Tripp, Elastic contact of rough spheres, J Appl Mech, vol.34, pp.153-162, 1967.
DOI : 10.1115/1.3607616

W. Tworzydlo, W. Cecot, J. Oden, and C. Yew, Computational micro-and macroscopic models of contact and friction: formulation, approach and applications, Wear, vol.220, pp.113-153, 1998.

A. Brzoza and V. Pauk, Torsion of rough elastic half-space by rigid punch, Arch Appl Mech, vol.78, pp.531-573, 2008.

M. Barquins, R. Courtel, and D. Maugis, Friction on stretched rubber, Wear, vol.38, pp.385-394, 1976.

C. Frétigny and A. Chateauminois, Contact of a spherical probe with a stretched rubber substrate, Soft Matter, vol.13, pp.5849-57, 2017.

K. Autumn, Y. A. Liang, S. T. Hsieh, W. Zesch, W. P. Chan et al., Adhesive force of a single gecko foot-hair, Nature, vol.405, pp.681-686, 2000.

E. Arzt, S. Gorb, and R. Spolenak, From micro to nano contacts in biological attachment devices, Proc Natl Acad Sci U S A, vol.100, pp.10603-10609, 2003.

M. Varenberg, N. M. Pugno, and S. N. Gorb, Spatulate structures in biological fibrillar adhesion, Soft Matter, vol.6, pp.3269-72, 2010.

A. Filippov, V. L. Popov, and S. N. Gorb, Shear induced adhesion: Contact mechanics of biological spatula-like attachment devices, J Theor Biol, vol.276, pp.126-157, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00682406

D. Labonte, J. A. Williams, and W. Federle, Surface contact and design of fibrillar 'friction pads' in stick insects (Carausius morosus): mechanisms for large friction coefficients and negligible adhesion, J R Soc Interface, vol.11, 2014.

W. Barthlott and C. Neinhuis, Purity of the sacred lotus, or escape from contamination in biological surfaces, Planta, vol.202, pp.1-8, 1997.

Z. Burton and B. Bhushan, Surface characterization and adhesion and friction properties of hydrophobic leaf surfaces, Ultramicroscopy, vol.106, pp.709-728, 2006.

P. Stempflé and M. Brendlé, Tribological behaviour of nacre-influence of the environment on the elementary wear processes, Tribol Int, vol.39, pp.1485-96, 2006.

M. J. Baum, A. E. Kovalev, J. Michels, and S. N. Gorb, Anisotropic friction of the ventral scales in the snake Lampropeltis getula californiae, Tribology Letters, vol.54, pp.139-50, 2014.

B. Dean and B. Bhushan, Shark-skin surfaces for fluid-drag reduction in turbulent flow: a review, Philos Trans A Math Phys Eng Sci, vol.368, pp.4775-806, 2010.

W. Federle, W. J. Barnes, W. Baumgartner, P. Drechsler, and J. M. Smith, Wet but not slippery: Boundary friction in tree frog adhesive toe pads, J R Soc Interface, vol.3, pp.689-97, 2006.

A. Prevost, J. Scheibert, and G. Debrégeas, Effect of fingerprints orientation on skin vibrations during tactile exploration of textured surfaces, Communicative & integrative biology, vol.2, pp.422-426, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00432527

S. Derler and L. Gerhardt, Tribology of skin: review and analysis of experimental results for the friction coefficient of human skin, Tribology Letters, vol.45, pp.1-27, 2012.

M. F. Leyva-mendivil, J. Lengiewicz, A. Page, N. W. Bressloff, and G. Limbert, Skin microstructure is a key contributor to its friction behaviour, Tribology Letters, vol.65, p.12, 2017.

R. Lakes, Materials with structural hierarchy, Nature, vol.361, pp.511-516, 1993.

P. Fratzl and R. Weinkamer, Nature's hierarchical materials, Progress in Materials Science, vol.52, pp.1263-334, 2007.

B. Yurdumakan, N. R. Raravikar, P. M. Ajayan, and A. Dhinojwala, Synthetic gecko foot-hairs from multiwalled carbon nanotubes, Chemical Communications, pp.3799-801, 2005.

J. Lee, B. Bush, R. Maboudian, and R. S. Fearing, Gecko-inspired combined lamellar and nanofibrillar array for adhesion on nonplanar surface, Langmuir, vol.25, pp.12449-53, 2009.

A. Singh and K. Suh, Biomimetic patterned surfaces for controllable friction in micro-and nanoscale devices, Micro and Nano Systems Letters, vol.1, p.6, 2013.
DOI : 10.1186/2213-9621-1-6

URL : https://mnsl-journal.springeropen.com/track/pdf/10.1186/2213-9621-1-6

B. Murarash, Y. Itovich, and M. Varenberg, Tuning elastomer friction by hexagonal surface patterning, Soft Matter, vol.7, pp.5553-5560, 2011.
DOI : 10.1039/c1sm00015b

N. Li, E. Xu, Z. Liu, X. Wang, and L. Liu, Tuning apparent friction coefficient by controlled patterning bulk metallic glasses surfaces, Sci Rep, vol.6, p.39388, 2016.
DOI : 10.1038/srep39388

URL : https://www.nature.com/articles/srep39388.pdf

A. Borghi, E. Gualtieri, D. Marchetto, L. Moretti, and S. Valeri, Tribological effects of surface texturing on nitriding steel for high-performance engine applications, Wear, vol.265, pp.1046-51, 2008.

E. Gualtieri, A. Borghi, L. Calabri, N. Pugno, and S. Valeri, Increasing nanohardness and reducing friction of nitride steel by laser surface texturing, Tribol Int, vol.42, pp.699-705, 2009.

M. J. Baum, L. Heepe, E. Fadeeva, and S. N. Gorb, Dry friction of microstructured polymer surfaces inspired by snake skin, Beilstein J Nanotechnol, vol.5, pp.1091-103, 2014.

S. Maegawa, F. Itoigawa, and T. Nakamura, Effect of surface grooves on kinetic friction of a rubber slider, Tribol Int, vol.102, pp.326-358, 2016.

B. He, W. Chen, and Q. J. Wang, Surface texture effect on friction of a microtextured poly (dimethylsiloxane)(PDMS), Tribology Letters, vol.31, p.187, 2008.

N. B. Tay, M. Minn, and S. K. Sinha, A tribological study of SU-8 micro-dot patterns printed on Si surface in a flat-on-flat reciprocating sliding test, Tribology Letters, vol.44, p.167, 2011.

C. Greiner, M. Schäfer, U. Popp, and P. Gumbsch, Contact splitting and the effect of dimple depth on static friction of textured surfaces, ACS applied materials & interfaces, vol.6, pp.7986-90, 2014.

L. Giraud, G. Bazin, and S. Giasson, Lubrication with Soft and Hard Two-Dimensional Colloidal Arrays, Langmuir, vol.33, pp.3610-3633, 2017.
DOI : 10.1021/acs.langmuir.7b00006

R. Capozza, A. Fasolino, M. Ferrario, and A. Vanossi, Lubricated friction on nanopatterned surfaces via molecular dynamics simulations, Physical Review B, vol.77, p.235432, 2008.
DOI : 10.1103/physrevb.77.235432

URL : https://repository.ubn.ru.nl/bitstream/2066/72030/1/72030.pdf

R. Burridge and L. Knopoff, Model and theoretical seismicity, Bulletin of the seismological society of america, vol.57, pp.341-71, 1967.

R. Capozza and N. Pugno, Effect of surface grooves on the static friction of an elastic slider, Tribology Letters, vol.58, p.35, 2015.

G. Costagliola, F. Bosia, and N. M. Pugno, Static and dynamic friction of hierarchical surfaces, Physical Review E, vol.94, p.63003, 2016.

G. Costagliola, F. Bosia, and N. M. Pugno, Hierarchical spring-block model for multiscale friction problems, ACS Biomaterials Science & Engineering, 2017.

G. Costagliola, F. Bosia, and N. M. Pugno, A 2-D model for friction of complex anisotropic surfaces, J Mech Phys Solids, vol.112, pp.50-65, 2018.

R. Capozza, S. M. Rubinstein, I. Barel, M. Urbakh, and J. Fineberg, Stabilizing stick-slip friction, Phys Rev Lett, vol.107, p.24301, 2011.
DOI : 10.1103/physrevlett.107.024301

URL : http://arxiv.org/pdf/1104.1950

N. M. Pugno, Q. Yin, X. Shi, and R. Capozza, A generalization of the Coulomb's friction law: from graphene to macroscale, Meccanica, vol.48, pp.1845-51, 2013.

D. Tabor, Surface forces and surface interactions, J Colloid Interface Sci, vol.58, pp.2-13, 1977.

V. Muller, V. Yushchenko, and B. Derjaguin, On the influence of molecular forces on the deformation of an elastic sphere and its sticking to a rigid plane, J Colloid Interface Sci, vol.77, pp.91-101, 1980.

J. Greenwood, Adhesion of elastic spheres, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol.453, pp.1277-97, 1997.

M. Ciavarella, J. Greenwood, and J. Barber, Effect of Tabor parameter on hysteresis losses during adhesive contact, J Mech Phys Solids, vol.98, pp.236-280, 2017.

J. A. Greenwood and K. L. Johnson, An alternative to the Maugis model of adhesion between elastic spheres, J Phys D, vol.31, pp.3279-90, 1998.

D. Maugis, Adhesion of spheres: The JKR-DMT transition using a dugdale model, J Colloid Interface Sci, vol.150, pp.243-69, 1992.

R. A. Sauer and S. Li, An atomic interaction-based continuum model for adhesive contact mechanics, Finite Elements Anal Des, vol.43, pp.384-96, 2007.
DOI : 10.1016/j.finel.2006.11.009

R. A. Sauer and P. Wriggers, Formulation and analysis of a three-dimensional finite element implementation for adhesive contact at the nanoscale, Comput Methods Appl Mech Eng, vol.198, pp.3871-83, 2009.

Y. Du, L. Chen, N. E. Mcgruer, G. G. Adams, and I. Etsion, A finite element model of loading and unloading of an asperity contact with adhesion and plasticity, J Colloid Interface Sci, vol.312, pp.522-530, 2007.

H. Eid, G. Adams, N. Mcgruer, A. Fortini, S. Buldyrev et al., A combined molecular dynamics and finite element analysis of contact and adhesion of a rough sphere and a flat surface, Tribol Trans, vol.54, pp.920-928, 2011.

G. Carbone and L. Mangialardi, Adhesion and friction of an elastic half-space in contact with a slightly wavy rigid surface, J Mech Phys Solids, vol.52, pp.1267-87, 2004.

G. Carbone and L. Mangialardi, Analysis of the adhesive contact of confined layers by using a Green's function approach, J Mech Phys Solids, vol.56, pp.684-706, 2008.

V. L. Popov, R. Pohrt, and Q. Li, Strength of adhesive contacts: Influence of contact geometry and material gradients, Friction, vol.5, pp.308-333, 2017.

K. Fuller and D. Tabor, The effect of surface roughness on the adhesion of elastic solids, vol.345, pp.327-369, 1975.

D. Maugis, On the contact and adhesion of rough surfaces, J Adhes Sci Technol, vol.10, pp.161-75, 1996.

W. Chang, I. Etsion, and D. Bogy, Adhesion model for metallic rough surfaces, Journal of Tribology, vol.110, pp.50-56, 1988.
DOI : 10.1115/1.3261574

A. O. Sergici, G. G. Adams, and S. Müftü, Adhesion in the contact of a spherical indenter with a layered elastic half-space, J Mech Phys Solids, vol.54, pp.1843-61, 2006.

K. L. Johnson and J. A. Greenwood, An Adhesion Map for the Contact of Elastic Spheres, J Colloid Interface Sci, vol.192, pp.326-359, 1997.

H. Yao, M. Ciavarella, and H. Gao, Adhesion maps of spheres corrected for strength limit, J Colloid Interface Sci, vol.315, pp.786-90, 2007.

H. Rumpf, Particle technology, 2012.

Y. I. Rabinovich, J. J. Adler, A. Ata, R. K. Singh, and B. M. Moudgil, Adhesion between nanoscale rough surfaces: I. Role of asperity geometry, J Colloid Interface Sci, vol.232, pp.10-16, 2000.
DOI : 10.1006/jcis.2000.7168

T. B. Jacobs, K. Ryan, P. Keating, D. Grierson, J. Lefever et al., The Effect of AtomicScale Roughness on the Adhesion of Nanoscale Asperities: A Combined Simulation and Experimental Investigation, Tribol Lett, vol.50, pp.81-93, 2013.

M. Ciavarella, A very simple estimate of adhesion of hard solids with rough surfaces based on a bearing area model, Meccanica, vol.2017, pp.1-10

M. Ciavarella and A. Papangelo, A generalized Johnson parameter for pull-off decay in the adhesion of rough surfaces, Physical Mesomechanics, vol.21, pp.67-75, 2017.

B. Persson and E. Tosatti, The effect of surface roughness on the adhesion of elastic solids, J Chem Phys, vol.115, pp.5597-610, 2001.

B. N. Persson and M. Scaraggi, Theory of adhesion: role of surface roughness, J Chem Phys, vol.141, p.124701, 2014.

B. Persson, Adhesion between an elastic body and a randomly rough hard surface, The European Physical Journal E: Soft Matter and Biological Physics, vol.8, pp.385-401, 2002.
DOI : 10.1140/epje/i2002-10025-1

C. W. Yong, K. Kendall, and W. Smith, Atomistic studies of surface adhesions using moleculardynamics simulations, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.362, pp.1915-1945, 2004.

Z. Deng, A. Smolyanitsky, Q. Li, X. Feng, and R. J. Cannara, Adhesion-dependent negative friction coefficient on chemically modified graphite at the nanoscale, Nature materials, vol.11, pp.1032-1039, 2012.

L. Pastewka and M. O. Robbins, Contact between rough surfaces and a criterion for macroscopic adhesion, Proceedings of the National Academy of Sciences, vol.111, pp.3298-303, 2014.

J. Wu, Numerical analyses on elliptical adhesive contact, J Phys D, vol.39, p.1899, 2006.
DOI : 10.1088/0022-3727/39/9/027

M. Bazrafshan, M. De-rooij, M. Valefi, and D. Schipper, Numerical method for the adhesive normal contact analysis based on a Dugdale approximation, Tribol Int, vol.112, pp.117-145, 2017.

S. Medina and D. Dini, A numerical model for the deterministic analysis of adhesive rough contacts down to the nano-scale, Int J Solids Structures, vol.51, pp.2620-2652, 2014.

R. Pohrt and V. L. Popov, Adhesive contact simulation of elastic solids using local mesh-dependent detachment criterion in boundary elements method, Facta Universitatis, Series: Mechanical Engineering, vol.13, pp.3-10, 2015.

S. Hulikal, K. Bhattacharya, and N. Lapusta, A threshold-force model for adhesion and mode I fracture, 2016.

V. Rey, G. Anciaux, and J. Molinari, Normal adhesive contact on rough surfaces: efficient algorithm for FFT-based BEM resolution, Comput Mech, vol.2017, pp.1-13
DOI : 10.1007/s00466-017-1392-5

URL : https://hal.archives-ouvertes.fr/hal-01755724

M. Ciavarella, On a recent stickiness criterion using a very simple generalization of DMT theory of adhesion, J Adhes Sci Technol, vol.30, pp.2725-2760, 2016.

N. Menga, G. Carbone, and D. Dini, Do uniform tangential interfacial stresses enhance adhesion?, J Mech Phys Solids, vol.112, pp.145-56, 2018.
DOI : 10.1016/j.jmps.2017.11.022

URL : http://arxiv.org/pdf/1710.06506

D. Gropper, L. Wang, and T. J. Harvey, Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings, Tribol Int, vol.94, pp.509-538, 2016.

C. Greiner and M. Schäfer, Bio-inspired scale-like surface textures and their tribological properties, Bioinspiration & biomimetics, vol.10, p.44001, 2015.
DOI : 10.1088/1748-3190/10/4/044001

H. G. Elrod and M. L. Adams, A Computer Program for Cavitation and Starvation Problems, pp.37-41, 1974.

H. G. Elrod, A cavitation algorithm, ASME J.Lubr.Technol, vol.103, p.350, 1981.

B. Jakobsson and L. Floberg, The finite journal bearing considering vaporization, Transactions of Chalmers University of Technology, vol.190, pp.1-116, 1957.

K. Olsson, Cavitation in dynamically loaded bearing, Trans.Chalmers Univ.of Tech, vol.308, 1957.

M. Braun and W. Hannon, Cavitation formation and modelling for fluid film bearings: a review, Proc Inst Mech Eng Part J, vol.224, pp.839-63, 2010.

F. Sahlin, A. Almqvist, R. Larsson, and S. Glavatskih, Rough surface flow factors in full film lubrication based on a homogenization technique, Tribol Int, vol.40, pp.1025-1059, 2007.

N. Patir and H. Cheng, An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication, Journal of Lubrication Technology, vol.100, 1978.

H. Elrod, A general theory for laminar lubrication with Reynolds roughness, Journal of Lubrication Technology, vol.101, pp.8-14, 1979.

J. Tripp, Surface roughness effects in hydrodynamic lubrication: the flow factor method, Journal of Lubrication Technology, vol.105, pp.458-65, 1983.

M. Scaraggi, G. Carbone, B. N. Persson, and D. Dini, Lubrication in soft rough contacts: A novel homogenized approach. Part I-Theory, Soft Matter, vol.7, pp.10395-406, 2011.

K. Miyoshi, Solid lubrication fundamentals and applications, 2001.

E. Y. Wornyoh, V. K. Jasti, and C. F. Higgs, A review of dry particulate lubrication: powder and granular materials, Journal of Tribology, vol.129, pp.438-487, 2007.

J. Jang and M. Khonsari, On the granular lubrication theory, vol.461, pp.3255-78, 2005.

P. Haff, Grain flow as a fluid-mechanical phenomenon, J Fluid Mech, vol.134, pp.401-431, 1983.

C. Lun, S. B. Savage, D. Jeffrey, and N. Chepurniy, Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfield, J Fluid Mech, vol.140, pp.223-56, 1984.

C. Lun and S. Savage, A simple kinetic theory for granular flow of rough, inelastic, spherical particles, J.Appl.Mech, vol.54, pp.47-53, 1987.

I. Iordanoff, Y. Berthier, S. Descartes, and H. Heshmat, A review of recent approaches for modeling solid third bodies, Journal of Tribology, vol.124, pp.725-760, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00454939

H. Heshmat, The rheology and hydrodynamics of dry powder lubrication, Tribol Trans, vol.34, pp.433-442, 1991.

P. A. Cundall and O. D. Strack, A discrete numerical model for granular assemblies, Geotechnique, vol.29, pp.47-65, 1979.

J. Neukirchner, Tribocorrosion and ways of prevention, Maschinenbautechnik, vol.29, pp.313-319, 1980.

J. P. Ewen, D. M. Heyes, and D. Dini, Advances in Nonequilibrium Molecular Dynamics Simulations of Lubricants and Additives, Friction, 2018.

B. K. Ahn, D. W. Lee, J. N. Israelachvili, and J. H. Waite, Surface-initiated self-healing of polymers in aqueous media, Nature materials, vol.13, pp.867-72, 2014.

O. Olabisi and K. Adewale, Handbook of thermoplastics, 2016.

G. Bao and S. Suresh, Cell and molecular mechanics of biological materials, Nature materials, vol.2, pp.715-740, 2003.

A. J. Licup, S. Munster, A. Sharma, M. Sheinman, L. M. Jawerth et al., Stress controls the mechanics of collagen networks, Proc Natl Acad Sci U S A, vol.112, pp.9573-9581, 2015.

L. Heepe and S. N. Gorb, Biologically inspired mushroom-shaped adhesive microstructures, Annual Review of Materials Research, vol.44, pp.173-203, 2014.
DOI : 10.1146/annurev-matsci-062910-100458

D. Rus and M. T. Tolley, Design, fabrication and control of soft robots, Nature, vol.521, pp.467-75, 2015.

N. Marx, J. Guegan, and H. A. Spikes, Elastohydrodynamic film thickness of soft EHL contacts using optical interferometry, Tribol Int, vol.99, pp.267-77, 2016.

W. Hutt and B. Persson, Soft matter dynamics: accelerated fluid squeeze-out during slip, J Chem Phys, vol.144, p.124903, 2016.
DOI : 10.1063/1.4944384

URL : http://juser.fz-juelich.de/record/860453/files/1.4944384.pdf

M. Scaraggi and B. Persson, Theory of viscoelastic lubrication, Tribol Int, vol.72, pp.118-148, 2014.
DOI : 10.1016/j.triboint.2013.12.011

C. Putignano and D. Dini, Soft matter lubrication: does solid viscoelasticity matter?, ACS Applied Materials & Interfaces, vol.9, pp.42287-95, 2017.
DOI : 10.1021/acsami.7b09381

URL : http://spiral.imperial.ac.uk/bitstream/10044/1/53107/9/acsami.7b09381.pdf

N. Selway, V. Chan, and J. R. Stokes, Influence of fluid viscosity and wetting on multiscale viscoelastic lubrication in soft tribological contacts, Soft Matter, vol.13, pp.1702-1717, 2017.

C. Putignano, G. Carbone, and D. Dini, Theory of reciprocating contact for viscoelastic solids, Phys Rev E, vol.93, p.43003, 2016.

C. Hatchett, Being the Substance of a Report Made to the Right Honourable the Lords of the Committee of Privy Council, Appointed to Take into Consideration the State of the Coins of This Kingdom, and the Present Establishment and Constitution of His Majesty's Mint, Experiments and Observations on the Various Alloys, on the Specific Gravity, and on the Comparative Wear of Gold, vol.93, pp.43-194, 1803.

A. Schirmeisen, Wear: one atom after the other, Nature nanotechnology, vol.8, pp.81-83, 2013.
DOI : 10.1038/nnano.2013.4

H. C. Meng and K. C. Ludema, Wear models and predictive equations: their form and content, Wear, vol.2, p.443, 1995.

G. Binnig, C. F. Quate, and C. Gerber, Atomic Force Microscope, Phys Rev Lett, vol.56, pp.930-933, 1986.

T. Jacobs, B. Gotsmann, M. A. Lantz, and R. W. Carpick, On the Application of Transition State Theory to Atomic-Scale Wear, Tribology Letters, vol.39, pp.257-71, 2010.

H. Bhaskaran, B. Gotsmann, A. Sebastian, U. Drechsler, M. A. Lantz et al., Ultralow nanoscale wear through atom-by-atom attrition in silicon-containing diamond-like carbon, Nature Nanotechnology, vol.5, pp.181-186, 2010.

B. Gotsmann and M. A. Lantz, Atomistic Wear in a Single Asperity Sliding Contact, Phys Rev Lett, vol.101, p.125501, 2008.
DOI : 10.1103/physrevlett.101.125501

Y. Shao, T. D. Jacobs, Y. Jiang, K. T. Turner, R. W. Carpick et al., Multibond Model of SingleAsperity Tribochemical Wear at the Nanoscale, ACS applied materials & interfaces, vol.9, pp.35333-35373, 2017.

T. Sato, T. Ishida, L. Jalabert, and H. Fujita, Real-time transmission electron microscope observation of nanofriction at a single Ag asperity, Nanotechnology, vol.23, p.505701, 2012.

A. P. Merkle and L. D. Marks, Liquid-like tribology of gold studied by in situ \TEM\, Wear, vol.265, pp.1864-1873, 2008.

V. Vahdat, D. S. Grierson, K. T. Turner, and R. W. Carpick, Mechanics of Interaction and Atomic-Scale Wear of Amplitude Modulation Atomic Force Microscopy Probes, ACS Nano, vol.7, pp.3221-3256, 2013.

K. Chung, Wear characteristics of atomic force microscopy tips: A reivew, International Journal of Precision Engineering and Manufacturing, vol.15, pp.2219-2249, 2014.

M. Bouchet, C. Matta, B. Vacher, T. Le-mogne, J. M. Martin et al., Energy filtering transmission electron microscopy and atomistic simulations of tribo-induced hybridization change of nanocrystalline diamond coating, Carbon, vol.87, pp.317-346, 2015.

J. Liu, J. K. Notbohm, R. W. Carpick, and K. T. Turner, Method for Characterizing Nanoscale Wear of Atomic Force Microscope Tips, ACS Nano, vol.4, pp.3763-72, 2010.

K. Chung and D. Kim, Fundamental Investigation of Micro Wear Rate Using an Atomic Force Microscope, Tribology Letters, vol.15, pp.135-179, 2003.

M. Ciavarella, On the effect of wear on asperity height distributions, and the corresponding effect in the mechanical response, Tribol Int, vol.101, p.164, 2016.

S. De-beer and M. H. Müser, Viewpoint: Surface Folds Make Tears and Chips, Physics, vol.5, p.100, 2012.

A. E. Filippov, V. L. Popov, and M. Urbakh, Mechanism of Wear and Ripple Formation Induced by the Mechanical Action of an Atomic Force Microscope Tip, Phys Rev Lett, vol.106, p.25502, 2011.

D. Sutton, G. Limbert, D. Stewart, and R. Wood, A functional form for wear depth of a ball and a flat surface, Tribology letters, vol.53, pp.173-182, 2014.

I. L. Singer, How third-body processes affect friction and wear, MRS Bull, vol.23, pp.37-40, 1998.
DOI : 10.1557/s088376940003061x

I. Singer, S. Dvorak, K. Wahl, and T. Scharf, Role of third bodies in friction and wear of protective coatings, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.21, pp.232-272, 2003.

J. Molinari, M. Ortiz, R. Radovitzky, and E. A. Repetto, Finite element modeling of dry sliding wear in metals, Eng Comput, vol.18, pp.592-610, 2001.

J. Andersson, A. Almqvist, and R. Larsson, Numerical simulation of a wear experiment, Wear, vol.271, p.2947, 2011.

J. Furustig, I. Dobryden, A. Almqvist, N. Almqvist, and R. Larsson, The measurement of wear using AFM and wear interpretation using a contact mechanics coupled wear model, Wear, vol.350, p.74, 2016.

J. Lengiewicz and S. Stupkiewicz, Continuum framework for finite element modelling of finite wear, Comput Methods Appl Mech Eng, vol.205, pp.178-88, 2012.

J. Lengiewicz and S. Stupkiewicz, Efficient model of evolution of wear in quasi-steady-state sliding contacts, Wear, vol.303, p.611, 2013.

A. V. Dimaki, A. I. Dmitriev, N. Menga, A. Papangelo, M. Ciavarella et al., Fast HighResolution Simulation of the Gross Slip Wear of Axially Symmetric Contacts, Tribol Trans, vol.59, pp.189-94, 2016.

A. Akchurin, R. Bosman, and P. M. Lugt, A Stress-Criterion-Based Model for the Prediction of the Size of Wear Particles in Boundary Lubricated Contacts, Tribology Letters, vol.64, p.35, 2016.

H. Song, R. J. Dikken, N. L. Van-der-giessen, and E. , Plastic Ploughing of a Sinusoidal Asperity on a Rough Surface, ASME.J.Appl.Mech, vol.82, pp.71006-71014, 2015.

F. Sun, E. Van-der-giessen, and N. L. , Dry frictional contact of metal asperities: A dislocation dynamics analysis, Acta Materialia, vol.109, p.162, 2016.

P. Stoyanov, P. A. Romero, R. Merz, M. Kopnarski, M. Stricker et al., Nanoscale sliding friction phenomena at the interface of diamond-like carbon and tungsten, Acta Materialia, vol.67, p.395, 2014.

L. Pastewka, S. Moser, P. Gumbsch, and M. Moseler, Anisotropic mechanical amorphization drives wear in diamond, Nature Materials, vol.10, pp.34-42, 2011.

J. Von-lautz, L. Pastewka, P. Gumbsch, and M. Moseler, Molecular Dynamic Simulation of CollisionInduced Third-Body Formation in Hydrogen-Free Diamond-Like Carbon Asperities, Tribology Letters, vol.63, p.26, 2016.

Z. Sha, V. Sorkin, P. S. Branicio, Q. Pei, Y. Zhang et al., Large-scale molecular dynamics simulations of wear in diamond-like carbon at the nanoscale, Appl Phys Lett, vol.103, p.73118, 2013.

X. Hu and A. Martini, Atomistic simulation of the effect of roughness on nanoscale wear, Computational Materials Science, vol.102, p.208, 2015.

X. Hu, S. Sundararajan, and A. Martini, The effects of adhesive strength and load on material transfer in nanoscale wear, Computational Materials Science, vol.95, p.464, 2014.

A. Li and I. Szlufarska, How grain size controls friction and wear in nanocrystalline metals, Phys.Rev.B, vol.92, p.75418, 2015.

S. Eder, A. Vernes, G. Vorlaufer, and G. B. , Molecular dynamics simulations of mixed lubrication with smooth particle post-processing, J Phys : Cond Matter, vol.23, p.175004, 2011.

M. Mishra, C. Tangpatjaroen, and I. Szlufarska, Plasticity-Controlled Friction and Wear in Nanocrystalline SiC, J Am Ceram Soc, vol.97, pp.1194-201, 2014.

L. Pastewka, M. Mrovec, M. Moseler, and P. Gumbsch, Bond order potentials for fracture, wear, and plasticity, MRS Bull, vol.37, pp.493-503, 2012.

X. Hu, M. Altoe, and A. Martini, Amorphization-assisted nanoscale wear during the running-in process, Wear, vol.370, pp.46-50, 2017.

M. Renouf, F. Massi, N. Fillot, and A. Saulot, Numerical tribology of a dry contact, Tribol Int, vol.44, p.834, 2011.

N. Fillot, I. Iordanoff, and Y. Berthier, Wear modeling and the third body concept, Wear, vol.262, p.949, 2007.

R. Aghababaei, D. H. Warner, and J. Molinari, On the debris-level origins of adhesive wear, Proceedings of the National Academy of Sciences, vol.114, pp.7935-7975, 2017.

J. F. Archard, Contact and rubbing of flat surfaces, J Appl Phys, vol.24, pp.981-989, 1953.

T. Reye, Zur theorie der zapfenreibung, Der Civilingenieur, vol.4, pp.235-55, 1860.

C. Grossiord, K. Varlot, J. Martin, L. Mogne, T. Esnouf et al., MoS2 single sheet lubrication by molybdenum dithiocarbamate, Tribol Int, vol.31, pp.737-780, 1998.

M. De-feo, C. Minfray, D. B. Bouchet, M. I. Thiebaut, B. et al., Ageing impact on tribological properties of MoDTC-containing base oil, Tribol Int, vol.92, pp.126-161, 2015.

H. Spikes, The history and mechanisms of ZDDP, Tribology letters, vol.17, pp.469-89, 2004.

F. Mangolini, A. Rossi, and N. D. Spencer, Situ Attenuated Total Reflection (ATR/FT-IR) Tribometry: A Powerful Tool for Investigating Tribochemistry at the Lubricant-Substrate Interface, vol.45, pp.207-225, 2012.

N. N. Gosvami, J. A. Bares, F. Mangolini, A. R. Konicek, D. G. Yablon et al., Mechanisms of antiwear tribofilm growth revealed in situ by single-asperity sliding contacts, Science, vol.348, p.102, 2015.

T. Jacobs and R. W. Carpick, Nanoscale wear as a stress-assisted chemical reaction, Nat Nano, vol.8, pp.108-120, 2013.

I. Lahouij, F. Dassenoy, B. Vacher, and J. Martin, Real Time TEM Imaging of Compression and Shear of Single Fullerene-Like MoS2 Nanoparticle, Tribology Letters, vol.45, pp.131-172, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01702872

S. Campen, J. H. Green, G. D. Lamb, and H. A. Spikes, In Situ Study of Model Organic Friction Modifiers Using Liquid Cell AFM; Saturated and Mono-unsaturated Carboxylic Acids, Tribology Letters, vol.57, p.18, 2015.

S. Mori and Y. Imaizumi, Adsorption of Model Compounds of Lubricant on Nascent Surfaces of Mild and Stainless Steels under Dynamic Conditions, Tribol Trans, vol.31, pp.449-53, 1988.

K. Hiratsuka, T. Abe, and C. Kajdas, Tribocatalytic oxidation of ethylene in the rubbing of palladium against aluminum oxide, Tribol Int, vol.43, pp.1659-64, 2010.

K. Nakayama, Mechanism of Triboplasma Generation in Oil, Tribology Letters, vol.41, pp.345-51, 2011.

O. Furlong, B. Miller, P. Kotvis, H. Adams, and W. T. Tysoe, Shear and thermal effects in boundary film formation during sliding, RSC Adv, vol.4, pp.24059-66, 2014.

M. Crobu, A. Rossi, and N. D. Spencer, Effect of Chain-Length and Countersurface on the Tribochemistry of Bulk Zinc Polyphosphate Glasses, Tribology Letters, vol.48, pp.393-406, 2012.

S. Berkani, F. Dassenoy, C. Minfray, M. Belin, B. Vacher et al., Model formation of ZDDP tribofilm from a mixture of zinc metaphosphate and goethite, Tribol Int, vol.79, pp.197-203, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01996195

H. Spikes and W. Tysoe, On the Commonality Between Theoretical Models for Fluid and Solid Friction, Wear and Tribochemistry. Tribology Letters, vol.59, pp.1-14, 2015.

S. Park, K. D. Costa, and G. A. Ateshian, Microscale frictional response of bovine articular cartilage from atomic force microscopy, J Biomech, vol.37, pp.1679-87, 2004.

J. M. Coles, J. J. Blum, G. D. Jay, E. M. Darling, F. Guilak et al., In situ friction measurement on murine cartilage by atomic force microscopy, J Biomech, vol.41, pp.541-549, 2008.

S. Chan, C. Neu, G. Duraine, K. Komvopoulos, and A. H. Reddi, Atomic force microscope investigation of the boundary-lubricant layer in articular cartilage, Osteoarthritis and Cartilage, vol.18, pp.956-63, 2010.

M. P. Gispert, A. P. Serro, R. Colaco, and B. Saramago, Friction and wear mechanisms in hip prosthesis: Comparison of joint materials behaviour in several lubricants, Wear, vol.260, pp.149-58, 2006.

D. M. Ebenstein, A. Kuo, J. J. Rodrigo, A. H. Reddi, M. Ries et al., A nanoindentation technique for functional evaluation of cartilage repair tissue, J Mater Res, vol.19, pp.273-81, 2004.

C. Li, L. A. Pruitt, and K. B. King, Nanoindentation differentiates tissue-scale functional properties of native articular cartilage, Journal of Biomedical Materials Research Part A, vol.78, pp.729-767, 2006.

E. M. Darling, R. E. Wilusz, M. P. Bolognesi, S. Zauscher, and F. Guilak, Spatial mapping of the biomechanical properties of the pericellular matrix of articular cartilage measured in situ via atomic force microscopy, Biophys J, vol.98, pp.2848-56, 2010.

M. Stolz, R. Raiteri, A. Daniels, M. R. Vanlandingham, W. Baschong et al., Dynamic elastic modulus of porcine articular cartilage determined at two different levels of tissue organization by indentation-type atomic force microscopy, Biophys J, vol.86, pp.3269-83, 2004.

M. Stolz, U. Aebi, and D. Stoffler, Developing scanning probe-based nanodevices-stepping out of the laboratory into the clinic, Nanomedicine: Nanotechnology, Biology and Medicine, vol.3, pp.53-62, 2007.

G. A. Ateshian, The role of interstitial fluid pressurization in articular cartilage lubrication, J Biomech, vol.42, pp.1163-76, 2009.

B. Zappone, G. W. Greene, E. Oroudjev, G. D. Jay, and J. N. Israelachvili, Molecular aspects of boundary lubrication by human lubricin: effect of disulfide bonds and enzymatic digestion, Langmuir, vol.24, pp.1495-508, 2008.

D. P. Chang, N. I. Abu-lail, J. M. Coles, F. Guilak, G. D. Jay et al., Friction force microscopy of lubricin and hyaluronic acid between hydrophobic and hydrophilic surfaces, Soft Matter, vol.5, pp.3438-3483, 2009.

M. Benz, N. Chen, and J. Israelachvili, Lubrication and wear properties of grafted polyelectrolytes, hyaluronan and hylan, measured in the surface forces apparatus, Journal of Biomedical Materials Research Part A, vol.71, pp.6-15, 2004.

D. Dean, L. Han, C. Ortiz, and A. J. Grodzinsky, Nanoscale conformation and compressibility of cartilage aggrecan using microcontact printing and atomic force microscopy, Macromolecules, vol.38, pp.4047-4056, 2005.

G. Limbert, Mathematical and computational modelling of skin biophysics: a review, vol.473, 2017.

D. Burns, S. Breathnach, N. Cox, and C. E. Griffiths, Rook's Textbook of Dermatology

F. H. Silver, L. M. Siperko, and G. P. Seehra, Mechanobiology of force transduction in dermal tissue, Skin Research and Technology, vol.9, pp.3-23, 2003.

M. F. Leyva-mendivil, A. Page, N. W. Bressloff, and G. Limbert, A mechanistic insight into the mechanical role of the stratum corneum during stretching and compression of the skin, Journal of the Mechanical Behavior of Biomedical Materials, vol.49, pp.197-219, 2015.

M. F. Leyva-mendivil, J. Lengiewicz, A. Page, N. W. Bressloff, and G. Limbert, Implications of multiasperity contact for shear stress distribution in the viable epidermis -an image-based finite element study, Biotribology, vol.11, pp.110-133, 2017.

Z. Zhou and J. Z. , Biotribology: recent progresses and future perspectives, Biosurface and Biotribology, vol.1, pp.3-24, 2015.

J. Van-kuilenburg, M. Masen, and E. Van-der-heide, The role of the skin microrelief in the contact behaviour of human skin: Contact between the human finger and regular surface textures, Tribol Int, vol.65, pp.81-90, 2013.

N. Veijgen, M. Masen, and E. Van-der-heide, Variables influencing the frictional behaviour of in vivo human skin, Journal of the Mechanical Behavior of Biomedical Materials, vol.28, pp.448-61, 2013.

M. Adams, B. Briscoe, and S. Johnson, Friction and lubrication of human skin, Tribology letters, vol.26, pp.239-53, 2007.

L. C. Gerhardt, V. Strassle, A. Lenz, N. D. Spencer, and S. Derler, Influence of epidermal hydration on the friction of human skin against textiles, J R Soc Interface, vol.5, pp.1317-1345, 2008.

M. Kwiatkowska, S. Franklin, C. Hendriks, and K. Kwiatkowski, Friction and deformation behaviour of human skin, Wear, vol.267, pp.1264-73, 2009.

L. Wolfram, Friction of skin, Journal of the Society of Cosmetic Chemists, vol.34, pp.465-76, 1983.

S. Stupkiewicz, M. J. Lewandowski, and J. Lengiewicz, Micromechanical analysis of friction anisotropy in rough elastic contacts, Int J Solids Structures, vol.51, pp.3931-3974, 2014.

M. Mendivil, J. Lengiewicz, and G. Limbert, Skin friction under pressure. The role of micromechanics. Surface Topography: Metrology and Properties, 2017.

G. Limbert and E. Kuhl, On skin microrelief and the emergence of expression micro-wrinkles, Soft matter, 2018.

M. Geerligs, C. Oomens, P. Ackermans, F. Baaijens, and G. Peters, Linear shear response of the upper skin layers, Biorheology, vol.48, pp.229-274, 2011.

B. Goldstein and J. Sanders, Skin response to repetitive mechanical stress: a new experimental model in pig, Arch Phys Med Rehabil, vol.79, pp.265-72, 1998.

E. Lamers, T. Van-kempen, F. Baaijens, G. Peters, and C. Oomens, Large amplitude oscillatory shear properties of human skin, Journal of the Mechanical Behavior of Biomedical Materials, vol.28, pp.462-70, 2013.

Y. Chu, S. Dufour, J. P. Thiery, E. Perez, and F. Pincet, Johnson-Kendall-Roberts theory applied to living cells, Phys Rev Lett, vol.94, p.28102, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00009431

S. Li and B. Sun, Advances in cell mechanics, 2012.

F. M. Borodich, B. A. Galanov, L. M. Keer, and M. M. Suarez-alvarez, Problems of adhesive contact interactions between prestressed biological cells, 2015.

K. Kendall, M. Kendall, and F. Rehfeldt, Adhesion of cells, viruses and nanoparticles, 2010.

M. H. Korayem, Z. Rastegar, and M. Taheri, Application of Johnson-Kendall-Roberts model in nanomanipulation of biological cell: air and liquid environment, Micro & Nano letters, vol.7, pp.576-80, 2012.

P. Lenarda, A. Gizzi, and M. Paggi, A modeling framework for contact, adhesion and mechanotransduction between excitable deformable cells, 2017.

M. L. Mccain, H. Lee, Y. Aratyn-schaus, A. G. Kléber, and K. K. Parker, Cooperative coupling of cellmatrix and cell-cell adhesions in cardiac muscle, Proceedings of the National Academy of Sciences, vol.109, pp.9881-9887, 2012.

A. Bueno-orovio, E. M. Cherry, and F. H. Fenton, Minimal model for human ventricular action potentials in tissue, J Theor Biol, vol.253, pp.544-60, 2008.

D. E. Hurtado, S. Castro, and A. Gizzi, Computational modeling of non-linear diffusion in cardiac electrophysiology: A novel porous-medium approach, Comput Methods Appl Mech Eng, vol.300, pp.70-83, 2016.

D. Ambrosi, G. Arioli, F. Nobile, and A. Quarteroni, Electromechanical Coupling in Cardiac Dynamics: The Active Strain Approach, SIAM J Appl Math, vol.71, pp.605-626, 2011.

J. Wong, S. Goktepe, and E. Kuhl, Computational modeling of chemo-? electro-? mechanical coupling: A novel implicit monolithic finite element approach, International journal for numerical methods in biomedical engineering, vol.29, pp.1104-1137, 2013.

R. Ruiz-baier, A. Gizzi, S. Rossi, C. Cherubini, A. Laadhari et al., Mathematical modelling of active contraction in isolated cardiomyocytes, Mathematical Medicine and Biology, vol.31, pp.259-83, 2014.

M. Paggi and A. Gizzi, A Computational Framework for Nonlinear Contact between Deformable Excitable Biological Cells, 2016.

M. Paggi and J. R. Barber, Contact conductance of rough surfaces composed of modified RMD patches, Int J Heat Mass Transfer, vol.54, pp.4664-72, 2011.

J. Hol, C. Alfaro, M. V. Meinders, V. T. Huetink, and J. , Advanced friction modeling in sheet metal forming, Key Eng Mat, vol.473, pp.715-737, 2011.

J. P. Ewen, S. E. Restrepo, N. Morgan, and D. Dini, Nonequilibrium molecular dynamics simulations of stearic acid adsorbed on iron surfaces with nanoscale roughness, Tribol Int, vol.107, pp.264-73, 2017.

E. B. Tadmor, M. Ortiz, and R. Phillips, Quasicontinuum analysis of defects in solids, Philos Mag A, vol.73, pp.1529-63, 1996.

E. Smith and D. Trevelyan, cpl-library: CPL library with a new streamlined Interface, 2016.