Kontinuumsmechanik: Einführung in die materialunabhängigen und materialabhängigen Gleichungen, pp.12-15, 1994. ,
Formation of Cavities from Nondeformable Second-Phase Particles in Low Temperature Ductile Fracture, Journal of Engineering Materials and Technology, vol.18, pp.60-68, 1976. ,
Elastoplastic deformation and damage process in duplex stainless steels studied using synchrotron and neutron diffractions in comparison with a self-consistent model, International Journal of Plasticity, vol.81, pp.102-122, 2016. ,
On fracture locus in the equivalent strain and stress triaxiality space, Int. J. Mech. Sciences, vol.46, pp.81-98, 2004. ,
Rupture mechanisms in combined tension and shear-Micromechanics, International Journal of Solids and Structures, vol.44, issue.17, pp.5481-5498, 2007. ,
Micromechanical analysis on the influence of the Lode parameter on void growth and coalescence, International Journal of Solids and Structures, vol.48, pp.925-938, 2011. ,
Plastic potentials for anisotropic porous solids, European Journal of Mechanics -A/Solids, vol.20, issue.3, pp.397-434, 2001. ,
Ductile fracture by void growth to coalescence, Adv. Appl. Mech, vol.44, pp.169-305, 2010. ,
Effective Yield Criterion Accounting for Microvoid Coalescence, Journal of Applied Mechanics, vol.81, issue.3, p.31009, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01667117
Ductile Failure Modeling, International Journal of Fracture, vol.201, issue.1, pp.29-80, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01668734
Stress-state-dependence of damage strain rate tensors caused by growth and coalescence of micro-defects, International Journal of Plasticity, vol.63, pp.49-63, 2014. ,
Shear Confusion: Identification of the Appropriate Equivalent Strain in Simple Shear using the Logarithmic Strain Measure, International Journal of Mechanical Sciences, vol.134, pp.273-283, 2017. ,
Void Nucleation Effects in Biaxially Stretched Sheets, ASME J. Eng. Mater. Technol, vol.102, issue.3, pp.249-256, 1980. ,
Influence of loading path on ductile fracture of tensile specimens made from aluminium alloys, International Journal of Solids and Structures, vol.88, pp.17-34, 2016. ,
Influence of the Lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials, International Journal of Solids and Structures, vol.49, pp.1325-1342, 2012. ,
URL : https://hal.archives-ouvertes.fr/hal-00755852
Competing damage mechanisms in a two-phase microstructure: How microstructure and loading conditions determine the onset of fracture, International Journal of Solids and Structures 97_98, pp.687-698, 2016. ,
Hybrid experimental-numerical analysis of basic ductile fracture experiments for sheet metals, Int. J. Solids and Structures, vol.47, issue.9, pp.1130-1143, 2010. ,
URL : https://hal.archives-ouvertes.fr/hal-00620568
Effect of Lode parameter on plastic flow localization after proportional loading at low stress triaxialities, J. Mech. Phys. Solids, vol.66, pp.133-153, 2014. ,
Three-Dimensional Microtomography, Science, vol.237, pp.1439-1444, 1987. ,
Softening by Void Nucleation and Growth in Tension and Shear, J. Mech. Phys. Solids, vol.37, pp.515-540, 1989. ,
Continuum modeling of strain localization phenomena in metallic foams, Journal of Materials Science, vol.40, pp.5903-5910, 2005. ,
URL : https://hal.archives-ouvertes.fr/hal-00153590
Computational homogenization of elasto-plastic porous metals, Int. J. Plast, vol.29, pp.102-119, 2012. ,
URL : https://hal.archives-ouvertes.fr/hal-00645498
Deformation and failure in nodular cast iron, Acta Mater, vol.60, pp.2359-2368, 2012. ,
Approximate models for ductile metals containing non-spherical voids-case of axisymmetric prolate ellipsoidal cavities, Journal of the Mechanics and Physics of Solids, vol.41, issue.11, pp.1723-1754, 1993. ,
Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I -Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, pp.2-15, 1977. ,
High-resolution three-dimensional imaging of flat objects by synchrotronradiation computed laminography, Appl. Phys. Lett, vol.86, issue.7, p.71915, 2005. ,
On the implementation of computed laminography using synchrotron radiation, Rev. Sci. Instrum, vol.82, p.63702, 2011. ,
Digital Image Correlation, Optical Methods for Solid Mechanics: A Full-Field Approach, pp.183-228, 2012. ,
URL : https://hal.archives-ouvertes.fr/hal-02310247
A theory of the yielding and plastic flow of anisotropic metals, Proceedings of the Royal Society of London Series A, vol.193, pp.281-297, 1948. ,
Modeling stress state dependent damage evolution in a cast AlSiMg aluminum alloy, Theor. Appl. Fract. Mech, vol.33, pp.31-47, 2000. ,
Micromechanical finite element calculations of temperature and void configuration effects on void growth and coalescence, Int. J. Plast, vol.16, pp.979-1015, 2000. ,
Étude expérimentale et numérique des mécanismes d'endommagement ductile et rupture des bords découpés des aciers avancés pour l'automobile, 2015. ,
In-situ 3-D synchrotron laminography assessment of edge fracture in DP steels: quantitative and numerical analysis, Experimental Mechanics, vol.56, pp.177-195, 2016. ,
An approximate yield criterion for anisotropic porous media, C.R. Mecanique, vol.336, pp.685-692, 2008. ,
Deformation and strain localization in polycrystals with plastically heterogeneous grains, International Journal of Plasticity, vol.86, pp.128-150, 2016. ,
On the role of secondary voids and their distribution in the mechanism of void growth and coalescence in porous plastic solids, International Journal of Solids and Structures, vol.108, pp.203-215, 2017. ,
Necking behavior of AA 6022-T4 based on the crystal plasticity and damage models, International Journal of Plasticity, vol.73, pp.3-23, 2014. ,
Observations of Intergranular Stress Corrosion Cracking in a Grain-Mapped Polycrystal, Science, vol.321, issue.5887, pp.382-385, 2008. ,
Properties controlling the bend-assisted fracture of AHSS, International Journal of Plasticity, vol.75, pp.100-120, 2015. ,
An elastoviscoplastic model for porous single crystals at finite strains and its assessment based on unit cell simulations, International Journal of Plasticity, vol.84, pp.58-87, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01357790
Void behaviors from low to high triaxialities: Transition from void collapse to void coalescence, International Journal of Plasticity, vol.84, pp.183-202, 2016. ,
A Gurson-type criterion for porous ductile solids containing arbitrary ellipsoidal voids -I: limit-analysis of some representative cell, J. Mech. Phys. Solids, vol.60, pp.1020-1036, 2012. ,
URL : https://hal.archives-ouvertes.fr/hal-01436400
An extended GTN model for ductile fracture under high and low stress triaxiality, International Journal of Plasticity, vol.54, pp.193-228, 2014. ,
Conditions de stabilite et postulat de Drucker, Rheology and Soil Mechanics, p.58, 1966. ,
Strain-path change induced transients in flow stress, work hardening and r-values in aluminum, International Journal of Plasticity, vol.69, pp.1-20, 2015. ,
Effect of compression-tension loading reversal on the strain to fracture of dual phase steel sheets, Int. J. Plast, vol.72, pp.21-43, 2015. ,
Mesoscale simulation of the early evolution of ductile fracture in dual-phase steels, International Journal of Plasticity, vol.74, pp.17-34, 2015. ,
A Criterion for Ductile Fracture by the Growth of Holes, ASME. J. Appl. Mech, vol.35, issue.2, pp.363-371, 1968. ,
Onset of fracture in high pressure die casting aluminum alloys, Eng. Fract. Mech, vol.75, pp.97-116, 2008. ,
Evaluation of associated and non-associated quadratic plasticity models for advanced high strength steel sheets under multiaxial loading, Int. J. Plasticity, vol.26, issue.7, pp.939-956, 2010. ,
URL : https://hal.archives-ouvertes.fr/hal-00620567
Micromechanically-motivated Phenomenological Hosford-Coulomb Model for Predicting Ductile Fracture Initiation at Low Stress Triaxialites, Int. J. Solids and Structures, pp.40-55, 2015. ,
, Scripta Mat, vol.62, pp.97-100, 2010.
Flat to slant ductile fracture transition: tomography examination and simulations using shear controlled void nucleation, Scripta Mat, vol.65, pp.1002-1005, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-00658608
3D Digital Volume Correlation of Synchrotron Radiation Laminography images of ductile crack initiation: An initial feasibility study, Exp. Mech, vol.53, issue.4, pp.543-556, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-00848726
In situ 3D observation of early strain localisation during failure of thin Al alloy (2198) sheet. Acta Mat, vol.69, pp.78-91, 2014. ,
On strain and damage interactions during tearing: 3D in situ measurements and simulations for a ductile alloy AA2139-T3, Journal of the Physics and Mechanics of Solids, vol.96, pp.550-571, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01383922
Application of a model of plastic porous materials including void shape effects to the prediction of ductile failure under shear-dominated loadings, J. Mech. Phys. Solids, vol.94, pp.148-166, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01311552
Efficient Volume Reconstruction for Parallel-Beam Computed Laminography by Filtered Backprojection on Multi-Core Clusters, IEEE Trans. Image Process, vol.22, issue.12, pp.5348-5361, 2013. ,
Collapse and coalescence of spherical voids subject to intense shearing: studied in full 3D, International Journal of Fracture, vol.177, issue.2, pp.97-108, 2012. ,
Numerical failure analysis of three-point bending on martensitic hat assembly using advanced plasticity and fracture model for complex loading, Int. J. Solids and Structures, vol.47, issue.9, pp.1130-1143, 2016. ,
Multiscale investigation of ductile fracture mechanisms and strain localization under shear loading in 2024-T351 aluminum alloy and 36NiCrMo16 steel, Materials Science and Engineering A, vol.610, pp.203-219, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01227265
On the ductile enlargement of voids in triaxial stress fields, Journal of the Mechanics and Physics of Solids, vol.17, issue.3, pp.201-217, 1969. ,
The localization of plastic deformation, Theoretical and Applied Mechanics, p.207, 1976. ,
Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets: experiments and modeling, Int. J. Plast, vol.56, pp.19-44, 2014. ,
Ductile fracture experiments with locally proportional loading histories, Int. J. Plast, vol.79, pp.328-354, 2016. ,
Three dimensional image correlation from X-Ray computed tomography of solid foam, Comp. Part A, vol.39, issue.8, pp.1253-1265, 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-01006730
Ductile failure of aluminum alloy tubes under combined torsion and tension, International Journal of Solids and Structures 97, vol.98, pp.116-128, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01802248
The growth and coalescence of ellipsoidal voids in plane strain under combined shear and tension, J. Mech. Phys. Solids, vol.59, pp.373-397, 2011. ,
Ductile damage model for metal forming simulations including refined description of void nucleation, International Journal of Plasticity, vol.71, pp.195-217, 2015. ,
Large deformation plasticity and the Poynting effect, Int. J. Plast, vol.17, issue.9, pp.1189-1214, 2001. ,
Micromechanical modelling of the behaviour of ductile materials including particles, Comp. Mat. Sci, vol.9, pp.7-17, 1997. ,
Image correlation for shape, motion and deformation measurements: Basic Concepts, Theory and Applications, 2009. ,
URL : https://hal.archives-ouvertes.fr/hal-01729219
Plastic instability under plane stress, Journal of Mechanics Physics of Solids, vol.1, pp.1-18, 1952. ,
Localized strain field measurement on laminography data with mechanical regularization, Nuclear Instruments and Methods in Physics Research Section B, vol.324, pp.70-79, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-00956440
A criterion for the onset of void coalescence under combined tension and shear, J. Mech. Phys. Solids, vol.60, pp.1363-1381, 2012. ,
URL : https://hal.archives-ouvertes.fr/hal-01666671
Evolution of the Intragranular Microstructure at Moderate and Large Strains -Modelling and Computational Significance, Proceedings of the 5th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM '95), pp.173-182, 1995. ,
Theoretical and numerical analysis of void coalescence in porous ductile solids under arbitrary loadings, International Journal of Plasticity, vol.91, pp.60-181, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01480131
Strain-induced damage of metals under large plastic deformation: Theoretical framework and experiments, International Journal of Plasticity, vol.59, pp.133-151, 2014. ,
Influence of voids on shear band instabilities under plane strain conditions, International Journal of Fracture, vol.17, issue.4, 1981. ,
Material failure by void growth to coalescence, Adv. Appl. Mech, vol.27, pp.83-151, 1990. ,
Effect of stress-state and spacing on voids in a shear-field, Int. J. Solids Struct, vol.49, pp.3047-3054, 2012. ,
Behaviour of porous ductile solids at low stress triaxiality in different modes of deformation, Int. J. Solids Struct, pp.28-34, 2015. ,
Study of localization in a void-sheet under stress states near pure shear, International Journal of Solids and Structures, pp.134-142, 2015. ,
In situ laminography study of threedimensional individual void shape evolution at crack initiation and comparison with Gurson-Tvergaard-Needleman-type simulations, Acta Mater, vol.78, pp.254-270, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01056836
The relationship between stress and strain for homogeneous deformation, Journal of the Institute Metals, vol.74, pp.537-562, 1948. ,
Real-time image content based beamline control for smart 4D X-ray imaging, Journal of Synchrotron Radiation, vol.23, pp.1254-1263, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01421577
Experiments and modeling of edge fracture for an AHSS sheet, International Journal of Fracture, vol.187, issue.2, pp.245-268, 2014. ,
Experimental investigation of void coalescence in metallic sheets containing laser drilled holes, Acta Mater, vol.56, pp.1774-1784, 2008. ,
Comparison of image quality in computed laminography and tomography, Optics Express, vol.20, pp.794-806, 2012. ,
Modeling the ductile damage process in commercially pure titanium, International Journal of Solids and Structures, vol.91, pp.26-45, 2016. ,