D. L. Turcotte, G. Schubert, and . Geodynamics, , 2002.

J. W. Lund, Characteristics, development and utilization of geothermal resources, Geo-Heat Center Bull, pp.1-9, 2007.

D. Bruel, Heat extraction modelling from forced fluid flow through stimulated fractured rock masses: Application to the Rosemanowes hot dry rock reservoir, Geothermics, vol.24, issue.3, pp.361-374, 1995.

D. Bruel, Modelling heat extraction from forced fluid flow through simulated fractured rock masses: Evaluation of the Soultz-sous-Forêts site potential, Geothermics, vol.24, issue.3, pp.439-450, 1995.

P. Papanastasiou, The effective fracture toughness in hydraulic fracturing, Int J Fract, vol.96, pp.127-147, 1999.

H. Murphy, D. Brown, R. Jung, I. Matsunaga, and R. Parker, Hydraulics and well testing of engineered geothermal reservoirs, Geothermics, vol.28, pp.491-506, 1999.

G. Grecksch, R. Jung, T. Tischner, and R. Weidler, Hydraulic fracturing at the European HDR/HFR test site Soultz-sous-Forêts (France)-a conceptual model, Proceedings of the European Geothermal Conference, 2003.

A. J. Jupe, D. Bruel, T. Hicks, R. Hopkirk, O. Kappelmeyer et al., Modelling of a European prototype HDR reservoir, Geothermics, vol.24, issue.3, pp.403-419, 1995.

C. Klimczak, R. A. Schultz, R. Parashar, and D. Reeves, Cubic law with aperture-length correlation: Implications for network scale fluid flow, Hydrogeol J, vol.18, issue.4, pp.851-862, 2010.

J. F. Shao, H. Zhou, and K. T. Chau, Coupling between anisotropic damage and permeability variation in brittle rocks, Int J Numer Anal Methods Geomech, vol.29, pp.1231-1247, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00021991

P. Papanastasiou and M. Thiercelin, Influence of inelastic rock behaviour in hydraulic fracturing, Int J Rock Mech Min Sci Geomech Abstr, vol.30, pp.1241-1247, 1993.

M. Abuaisha, Enhanced Geothermal Systems: Permeability Stimulation Through Hydraulic Fracturing in a Thermo-poroelastic Framework, 2014.

D. F. Mctigue, Thermoelastic response of fluid-saturated porous rock, J Geophys Res, vol.91, pp.9533-9542, 1986.

J. Baumgärtner, R. Jung, A. Gérard, R. Baria, and J. Garnish, The European HDR project at Soultz-sous-Forêts: Stimulation of the second deep well and first circulation experiment, Proceedings of the 21th Workshop on Geothermal Reservoir Engineering, 1996.

K. Evans, B. Valley, M. Häring, R. Hopkirk, C. Baujard et al., Studies and Support for the EGS Reservoirs at Soultz-sous-Forêts, 2009.

R. Gelet, Thermo-hydro-mechanics of Deformable Porous Media with Double Porosity and Local Thermal Non-equilibrium

F. Jiang, L. Luo, and J. Chen, A novel three-dimensional transient model for subsurface heat exchange in enhanced geothermal systems, Int Commun Heat Mass Transfer, vol.41, pp.57-62, 2013.

B. K. Atkinson, Fracture Mechanics of Rock, 1991.

F. H. Cornet, T. Bérard, and S. Bourouis, How close to failure is a granite rock mass at a 5 km depth, Int J Rock Mech Min Sci, vol.44, issue.1, pp.47-66, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00310997

M. Abuaisha and B. Loret, Stabilization of forced heat convection: Applications to Enhanced Geothermal Systems (EGS), Transp Porous Media, vol.111, issue.1, pp.1-24, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02019683

S. H. Lee and A. Ghassemi, Thermo-poroelastic analysis of injectioninduced rock deformation and damage evolution, Proceedings of the Thirty-Fifth Workshop on Geothermal Reservoir Engineering, 2010.

S. H. Lee and A. Ghassemi, Three-dimensional thermo-poro-mechanical modeling of reservoir stimulation and induced microseismicity in geothermal reservoir, Proceedings of the Thirty-Sixth Workshop on Geothermal Reservoir Engineering, 2011.

Y. Chen, C. Zhou, and Y. Sheng, Formulation of strain-dependent hydraulic conductivity for a fractured rock mass, Int J Rock Mech Min Sci, vol.44, issue.7, pp.981-996, 2007.

O. Kolditz, Modelling flow and heat transfer in fractured rocks: Dimensional effect of matrix heat diffusion, Geothermics, vol.24, issue.3, pp.421-437, 1995.

H. Francke and M. Thorade, Density and viscosity of brine: An overview from a process engineers perspective, Chem Erde, vol.70, issue.S3, pp.23-32, 2010.

A. Battistelli, C. Calore, and K. Pruess, The simulator TOUGH2/EWASG for modelling geothermal reservoirs with brines and non-condensible gas, Geothermics, vol.26, issue.4, pp.437-464, 1997.

J. Burger, P. Sourieau, and M. Combarnous, Thermal Methods of Oil Recovery. Paris: Editions Technip, 1985.

E. R. Likhachev, Dependence of water viscosity on temperature and pressure, Tech Phys, vol.48, issue.4, pp.514-515, 2003.

E. Santoyo, S. Santoyo-gutiérrez, A. García, G. Espinosa, and S. L. Moya, Rheological property measurement of drilling fluids used in geothermal wells, Appl Therm Eng, vol.21, pp.283-302, 2001.

A. Garcia-gutiérrez, G. Espinosa-paredes, and G. Amaro-espejo, Effect of variable rheological properties of drilling muds and cements on the temperature distribution in geothermal wells, Proceedings of World Geothermal Congress, 2005.

E. Fjaer, R. M. Holt, P. Horsrud, A. M. Raaen, and R. Risnes, Petroleum Related Rock Mechanics, vol.29, 2008.