V. Guipont and M. Nivard, New advances for laser adhesion test (LASAT) : From thick to thin coatings, 30th International Congress on Applications of Lasers & Electro?Optics, pp.23-27, 2011.

C. Feng, V. Guipont, M. Jeandin, O. Amsellem, F. Pauchet et al., Iacob : B4C-Ni Composite coatings prepared by cold spray of blended or CVD coated powders, International Thermal Spray Conference, pp.27-29, 2011.

G. Fabre, V. Guipont, M. Jeandin, A. Pasquet, J. Guedou et al., Interfacial strength measurement of oxidized EB-PVD thermal barrier coatings by the LAser Shock Adhesion Test (LASAT (oral)-CD-ROM Microstructures of cold-sprayed coating investigated by X-Ray microtomography, International Thermal Spray Conference, International Conference on Metallurgical Coatings & Thin Films, pp.2-6, 2010.

S. Ain, E. Costil, Y. Irissou, J. Danlos, W. Legoux et al., Jeandin : The Protal® Process applied on cold spraying to improve interface adherence and coating cohesion ? case of titanium and nickel based alloys, International Thermal Spray Conference, pp.3-5, 2010.

G. Rolland, V. Guipont, M. Jeandin, C. Peyrega, D. Jeulin et al., Microstructures of cold-sprayed coating investigated by X-ray microtomography Pub : SF2M (ISBN : 978-2-917839-04-01) (communication orale par V.Guipont), SF2M Annual Meeting, pp.22-24, 2009.

V. Guipont, M. Jeandin, D. K. Christoulis, F. Borit, V. Guipont et al., Mise en oeuvre et caractéristiques de dépôts par projection thermique « cold spray » : vers la maîtrise de la porosité Pub : A3TS (communication orale par V.Guipont), 37ème Congrès du Traitement Thermique et de l'Ingénierie des Surfaces Al-12Si cold sprayed coatings with controlled porosity, International Thermal Spray Conference, pp.24-26, 2008.

D. K. Christoulis, F. Borit, V. Guipont, and M. , Jeandin : Evidence of the 2-stage build-up process in cold spray from the study of influence of powder characteristics on Ti-6Al-4V coating, International Thermal Spray Conference, pp.848-853, 2008.

G. Rolland, F. Borit, V. Guipont, M. Jeandin, L. Bara et al., Bourda : Three-dimensional analysis of cold sprayed coatings using microtomography, International Thermal Spray Conference, pp.607-610, 2008.

K. I. Triantou, C. I. Sarafoglou, D. I. Pantelis, D. K. Christoulis, V. Guipont et al., Vardavoulias : A microstructural study of cold sprayed Cu coatings on 2017 Al alloy, International Thermal Spray Conference, pp.2-4, 2008.

O. Amsellem, K. Madi, F. Borit, D. Jeulin, V. Guipont et al., Pauchet : Three- Sept LAser Shock Adhesion Testing (LASATesting) of plasma-sprayed hydroxyapatite (HA) coating of Ti-based substrates, International Thermal Spray Conference, Guipont) 2005 [CIN 16] C.I.Sarafoglou, D.I.Pantelis, F.Borit, V.Guipont, M.Jeandin : Tribological study of air plasma-sprayed Ti for biomedical applications, 18th International Conference on Surface Modification Technologies (SMT18), pp.15-18, 2004.

M. Delque, F. Borit, N. De-dave-fabrègue, V. Guipont, M. Jeandin et al., Revêtements composites anti-usure à base titane obtenus par projection plasma réactive sous azote, 33ème Congrès du Traitement Thermique et de l'Ingéniérie des Surfaces (ATTT 2005), pp.15-17, 2005.

Y. Ichikawa, S. Barradas, F. Borit, V. Guipont, M. Jeandin et al., Study of the Laser Shock Adhesion Tests (LASAT) of ceramics coatings, 1st International Student Workshop (German- Japan-Korea) Hydroxyapatite coatings with pressure-dependent porosity level and amorphous phase content obtained by controlled atmosphere plasma spraying, 14th International Conference on Surface Modification Technologies (SMT14), pp.15-16, 2000.

V. Guipont, M. Pons, M. Jeandin, and K. A. , Khor : High pressure plasma spraying (HPPS) of spheroidized and spray-dried hydroxyapatite powders, Séminaire « biomatériaux », p.14

]. V. Guipont, M. Pons, M. Jeandin, and K. A. Khor, Dépôts biocéramiques par projection plasma en surpression de poudres d'hydroxyapatite agglomérées ou sphéroïdisées, Journées annuelles du Groupe Français de la Céramique (GFC)Khor : High pressure plasma spraying (HPPS) of spheroidized and spray-dried hydroxyapatite powders, 13th International Conference on Surface Modification Technologies (SMT13), pp.4-6, 1999.

V. Guipont, New developments in thermal spray technology, Invited Seminar of the Institute of Materials-East Asia, 1999.

V. Guipont, N. De-dave, F. Borit, M. Jeandin, M. Jeandin et al., Dépôts céramiques par projection plasma sous atmosphère contrôlée en surpression avec le système CAPSControlled Atmosphère Plasma Spraying 1999 (communication orale par V.Guipont), Lattice-gas modeling (LGM) in thermal spraying, International ASM Conference "Materials Solutions'98, pp.27-28, 1996.

V. Guipont, A. Chateauminois, S. Fayeulle, D. Treheux, G. Lascar et al., Residual stresses in ceramic-metal bonds : comparison with X-Ray analysis, strain gage [RC 7] F.Borit, V.Guipont : Etude et réalisation d'un revêtement carbure de tungstène par projection thermique pour table de pastillage, 2000.

F. Borit, V. Guipont, and M. Jeandin, Réalisation de revêtement de lames de coupe en V par projection plasma de composite à lubrifiant solide, rapport d'étude ARMINES, 2000.

N. De-dave-fabrègue, F. Borit, V. Guipont, and M. Jeandin, Etude de revêtement multicouches pur réseaux d'électrodes, 2000.

S. Domagala, F. Borit, N. De-dave-fabrègue, V. J. Beaulieu, N. De-dave-fabrègue et al., Guipont : Etude, réalisation de barrières thermiques par projection plasma APS et mise au point d'un "manufacturing process plan Etude de l'imprégnation de dépôts plasma céramiques par dépôt électrolytique de nickel, rapport d'étude ARMINES, CEA-Le ripault : Etude de l'imprégnation de dépôts céramiques projetés, rapport d'étude ARMINES, CEA-Le ripault, 1997.

A. Blanc-'porodyn, ) : « Dépots à structure poreuse obtenus par projection dynamique par gaz froid «Cold Spray

A. Blanc-'porodyn, ) : « Dépots à structure poreuse obtenus par projection dynamique par gaz froid «Cold Spray

C. Bilatéral-france-inde, TiN&TiC Powder and Coatings by Reactive Plasma Processing " 2009 -MERLION France/Singapore 'LASAT4BIO' : " bioactivity of innovative biometals and bioceramics through in vitro measurement of cells adhesion by LASAT (Laser Shock Adhesion Test

M. France and /. Singapore, Local Approach To Investigate Interface Strength Of Bio-Ceramic Hydroxypatite Plasma-Sprayed Coatings

E. Fp6-'intact, Innovative Tool for Adhesion Control and Testing of Multifunctional Coatings

E. Fp5-'amspray-', Applied Modelling For Quality Assessment Of Advanced Thermally-Sprayed Coating Systems And Spray-Formed Prototypes For The Aircraft Industry

]. D. Jager, D. Stöver, W. Schlump, C. C. Berndt-ed, M. Sodeoka et al., SMT21 Paris (2007) Co-chairman reponsable Europe du symposium « Coatings for Biomedical Applications » pour la conférence ASM High pressure plasma spraying in controlled atmosphere up to two bar Plasma spraying under controlled atmosphere up to 300kPa Effect of pressure deposition on plasma jet and coatings microstructure, Proceedings of the 5th National Thermal Spray Conference & exposition Proceedings of the 14th International Thermal Spray Conference Proceedings of the 9th National Thermal Spray Conference, pp.69-74, 1992.

L. Bianchi, P. Brelivet, A. Freslon, A. Fornier, C. Cordillot et al., Plasma sprayed boron carbide coatings as first wall material for laser fusion target chamber, 1998.

J. F. Li, H. Liao, B. Normand, C. Cordier, G. Maurin et al., Uniform design method for optimization of process parameters of plasma sprayed TiN coatings, Surface and Coatings Technology, vol.176, issue.1, 2003.
DOI : 10.1016/S0257-8972(03)00019-7

G. Pulci, M. Tului, J. Tirillo, F. Marra, S. Lionetti et al., High Temperature Mechanical Behavior of UHTC Coatings for Thermal Protection of Re-Entry Vehicles, Journal of Thermal Spray Technology, vol.82, issue.4, pp.1-2, 2011.
DOI : 10.1007/s11666-010-9578-9

M. Suzuki, S. Sodeoka, and T. Inoue, Zircon-based ceramics composite coating for environmental barrier coatingAdvanced thermal spray technology and coating for lightweight engine blocks for the automotive industryNitridation process and mechanism of Ti-6Al-4V particles by dc plasma spraying, Journal of Thermal Spray Technology Surface & Coatings Technology Physical Chemistry Chemical Physics, vol.1756, issue.522, 2003.

A. A. Syed, A. Denoirjean, P. Fauchais, and J. C. Labbe, On the oxidation of stainless steel particles in the plasma jet, Surface and Coatings Technology, vol.200, issue.14-15, pp.14-15, 2006.
DOI : 10.1016/j.surfcoat.2005.02.156
URL : https://hal.archives-ouvertes.fr/hal-00087552

E. Lugscheider, H. Jungklaus, L. Zhao, and H. Reymann, Reactive plasma spraying of coatings containing in situ synthesized titanium hard phases, International Journal of Refractory Metals and Hard Materials, vol.15, issue.5-6, pp.5-6, 1997.
DOI : 10.1016/S0263-4368(97)87505-1

T. Valente, F. Carassiti, M. Suzuki, and M. Tului, High pressure reactive plasma spray synthesis of titanium nitride based coatings, Surface Engineering, vol.32, issue.4, 2000.
DOI : 10.1023/A:1006574831758

M. Fukumoto, E. Nishioka, and T. Nishiyama, New criterion for splashing in flattening of thermal sprayed particles onto flat substrate surface, Surface and Coatings Technology, vol.161, issue.2-3, 2002.
DOI : 10.1016/S0257-8972(02)00471-1

S. Goutier, M. Vardelle, and P. Fauchais, Understanding of Spray Coating Adhesion Through the Formation of a Single Lamella, Journal of Thermal Spray Technology, vol.161, issue.2-3, pp.3-4, 2012.
DOI : 10.1007/s11666-012-9763-0
URL : https://hal.archives-ouvertes.fr/hal-00709749

S. Valette, A. Denoirjean, and . Lefort, Plasma sprayed steel: Adhesion of an alumina film via a w??stite interlayer, Surface and Coatings Technology, vol.202, issue.12, 2008.
DOI : 10.1016/j.surfcoat.2007.09.040

G. Dwivedi, T. Nakamura, and S. Sampath, Controlled Introduction of Anelasticity in Plasma-Sprayed Ceramics, Journal of the American Ceramic Society, vol.16, issue.[9], 2011.
DOI : 10.1111/j.1551-2916.2011.04494.x

G. Antou and G. Montavon, Quantifying Thermal Spray Coating Architecture by Stereological Protocols: Part II. Key Points to be Addressed, Journal of Thermal Spray Technology, vol.224, issue.2, 2007.
DOI : 10.1007/s11666-007-9037-4
URL : https://hal.archives-ouvertes.fr/hal-00176464

G. Bolelli, V. Cannillo, L. Lusvarghi, T. Manfredini, and M. Montorsi, Glass???alumina composite coatings by plasma spraying. Part II: Microstructure-based modeling of mechanical properties, Surface and Coatings Technology, vol.201, issue.1-2, pp.1-2, 2006.
DOI : 10.1016/j.surfcoat.2005.10.038

P. Michlik and C. Berndt, Image-based extended finite element modeling of thermal barrier coatings, Surface and Coatings Technology, vol.201, issue.6, 2006.
DOI : 10.1016/j.surfcoat.2006.04.003

R. Bolot, G. Anton, G. Montavon, and C. Coddet, A Two-Dimensional Heat Transfer Model for Thermal Barrier Coating Average Thermal Conductivity Computation, Numerical Heat Transfer, Part A: Applications, vol.94, issue.9, 2005.
DOI : 10.1109/TVLSI.2003.812372

J. Zhang and V. Desai, Evaluation of thickness, porosity and pore shape of plasma sprayed TBC by electrochemical impedance spectroscopy, Surface and Coatings Technology, vol.190, issue.1, 2005.
DOI : 10.1016/j.surfcoat.2004.06.019

G. Antou, G. Montavon, F. Hlawka, A. Cornet, and C. Coddet, Exploring Thermal Spray Gray Alumina Coating Pore Network Architecture by Combining Stereological Protocols and Impedance Electrochemical Spectroscopy, Journal of Thermal Spray Technology, vol.15, issue.4, 2006.
DOI : 10.1361/105996306X147045
URL : https://hal.archives-ouvertes.fr/hal-00150971

T. Haure, A. Denoirjean, P. Tristant, J. Desmaison, P. Fauchais et al., «Interconnected porosity of plasma sprayed alumina coatings : evaluation and modification», Thermal Spray 2003 : Advancing the Science & Applying the Technology, pp.1317-1324, 2003.

G. Montavon, C. Coddet, C. C. Berndt, and S. H. Leigh, Microstructural Index to Quantify Thermal Spray Deposit Microstructures Using Image Analysis, Journal of Thermal Spray Technology, vol.7, issue.2, 1998.
DOI : 10.1361/105996398770350972

P. Ctibor, R. Lechnerova, and V. Benes, Quantitative analysis of pores of two types in a plasma-sprayed coating, Materials Characterization, vol.56, issue.4-5, pp.4-5, 2006.
DOI : 10.1016/j.matchar.2005.11.016

A. Kulkarni, A. Goland, H. Herman, A. J. Allen, T. Dobbins et al., Advanced neutron and X-ray techniques for insights into the microstructure of EB-PVD thermal barrier coatings, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2006.
DOI : 10.1016/j.msea.2006.03.070

Y. Zhao, A. Shinmi, X. Zhao, P. J. Withers, S. Van-boxel et al., Investigation of interfacial properties of atmospheric plasma sprayed thermal barrier coatings with four-point bending and computed tomography technique, Surface and Coatings Technology, vol.206, issue.23, 2012.
DOI : 10.1016/j.surfcoat.2012.05.099

P. Fauchais and A. Vardelle, Innovative and emerging processes in plasma spraying: from micro- to nano-structured coatings, Journal of Physics D: Applied Physics, vol.44, issue.19, 2011.
DOI : 10.1088/0022-3727/44/19/194011
URL : https://hal.archives-ouvertes.fr/hal-00591976

V. Niessen, K. , and M. Gindrat, Vapor Phase Deposition Using Plasma Spray-PVD???, Journal of Thermal Spray Technology, vol.417, issue.1-2, pp.502-509, 2010.
DOI : 10.1007/s11666-009-9428-9

M. Yamada and H. Isago, Cold Spraying of TiO2 Photocatalyst Coating With Nitrogen Process Gas, Journal of Thermal Spray Technology, vol.253, issue.2, pp.1218-1223, 2010.
DOI : 10.1007/s11666-010-9520-1

C. K. Lin and C. C. Berndt, Measurement and analysis of adhesion strength for thermally sprayed coatings, Journal of Thermal Spray Technology, vol.30, issue.1, p.75, 1994.
DOI : 10.1007/BF02649003

J. Cuq-lelandais, Etude du comportement dynamique de matériaux sous choc laser subpicoseconde, Thèse ENSMA, 2010.

M. Arrigoni, S. Barradas, A. Braccini, M. Dupeux, M. Jeandin et al., A comparative study of three adhesion tests (EN 5829 similar to ASTM C633, LASAT (LASer Adhesion Test), and bulge and blister test) performed on plasma sprayed copper deposited on aluminium 2017 substrates, Journal of Adhesion Science and Technology, vol.20, issue.5, 2006.

M. Boustie, E. Auroux, and J. P. Romain, Application of the laser spallation technique to the measurement of the adhesion strength of tungsten carbide coatings on superalloy substrates, The European Physical Journal Applied Physics, vol.12, issue.1, 2000.
DOI : 10.1051/epjap:2000170

S. V. Klinkov, V. F. Kosarev, A. A. Sova, and I. Smurov, Deposition of multicomponent coatings by Cold Spray, Surface and Coatings Technology, vol.202, issue.24, 2008.
DOI : 10.1016/j.surfcoat.2008.06.171

J. Knuuttila, P. Sorsa, and T. Mantyla, Sealing of thermal spray coatings by impregnation, Journal of Thermal Spray Technology, vol.4, issue.1, 1999.
DOI : 10.1007/s11666-999-0002-2

E. Parra-denis, Analyse morphologique 3D de particules de forme complexe : Application aux intermétalliques dans les alliages d'aluminium, Thèse Université Jean Monnet, p.209, 2007.

K. Bobzin, N. Bagcivan, D. Parkot, M. Schaefer, and I. Petkovic, Modeling and Simulation of Microstructure Formation for Porosity Prediction in Thermal Barrier Coatings Under Air Plasma Spraying Condition, Journal of Thermal Spray Technology, vol.89, issue.4, pp.5-6, 2009.
DOI : 10.1007/s11666-009-9340-3

I. Sevostianov and M. Kachanov, Elastic and Conductive Properties of Plasma-Sprayed Ceramic Coatings in Relation to Their Microstructure: An Overview, Journal of Thermal Spray Technology, vol.84, issue.2007, pp.5-6, 2009.
DOI : 10.1007/s11666-009-9344-z

M. Xue, S. Chandra, J. Mostaghimi, and C. Moreau, A stochastic coating model to predict the microstructure of plasma sprayed zirconia coatings, Modelling and Simulation in Materials Science and Engineering, vol.16, issue.6, 2008.
DOI : 10.1088/0965-0393/16/6/065006

R. Vert, D. Chicot, X. Decoopman, I. C. Gruescu, E. Meillot et al., Adhesive and cohesive properties of nanostructured ZrO2 coatings by the original Vickers Indentation Cracking technique, Thin Solid Films, vol.519, issue.22, 2011.

G. Cailletaud, S. Forest, D. Jeulin, F. Feyel, I. Galliet et al., Some elements of microstructural mechanics, Computational Materials Science, vol.27, issue.3, 2003.
DOI : 10.1016/S0927-0256(03)00041-7

F. Gaertner, T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr et al., Mechanical properties of cold-sprayed and thermally sprayed copper coatings, Surface and Coatings Technology, vol.200, issue.24, 2006.
DOI : 10.1016/j.surfcoat.2005.10.007

S. Sampath, Thermal Spray Applications in Electronics and Sensors: Past, Present, and Future, Journal of Thermal Spray Technology, vol.14, issue.4, 2010.
DOI : 10.1007/s11666-010-9475-2

A. Ansar, D. Soysal, and G. Schiller, Nanostructured functional layers for solid oxide fuel cells, International Journal of Energy Research, vol.33, issue.6, 2009.
DOI : 10.1002/er.1614

E. Turunen, T. Varis, S. P. Hannula, A. Vaidya, A. Kulkarni et al., On the role of particle state and deposition procedure on mechanical, tribological and dielectric response of high velocity oxy-fuel sprayed alumina coatings, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2006.
DOI : 10.1016/j.msea.2005.08.226

N. Cornet, D. Goeuriot, C. Guerret-piecourt, D. Juve, D. Treheux et al., Electron beam charging of insulators with surface layer and leakage currents, Journal of Applied Physics, vol.103, issue.6, 2008.
DOI : 10.1063/1.2890427
URL : https://hal.archives-ouvertes.fr/hal-00281702

M. Arrigoni, M. Boustie, C. Bolis, S. Barradas, L. Berthe et al., Shock mechanics and interfaces, dans Mechanics of solid interfaces, pp.211-248, 2012.

H. Akamatsu, M. Satou, T. Sato, A. Jain, V. Gupta et al., Evaluation of bonding strength between yttria coating and vanadium alloys for development of self-cooled blanket, Journal of Nuclear Materials, vol.417, issue.1-3, pp.1-3, 2011.
DOI : 10.1016/j.jnucmat.2011.03.004

R. Ikeda, T. Uchiyama, H. Cho, T. Ogawa, and M. Takemoto, An advanced method for measuring the residual stress of deposited film utilizing laser spallation technique, Science and Technology of Advanced Materials, vol.59, issue.60, 2006.
DOI : 10.1063/1.1564880

S. R. Choi, J. W. Hutchinson, and A. G. Evans, Delamination of multilayer thermal barrier coatings, Mechanics of Materials, vol.31, issue.7, 1999.
DOI : 10.1016/S0167-6636(99)00016-2

V. Gupta, V. Kireev, S. N. Basu, and H. Wu, In-situ intrinsic interface strength measurement at elevated temperatures and its relationship to interfacial structure, Interface Science, vol.11, issue.3, 2003.

M. Francois, Borit : technicien plasma et cold spray, essais mécaniques et traitements thermiques

L. Gillibert, C. Peyrega, D. Jeulin, V. Guipont, and M. , 3D multiscale segmentation and morphological analysis of x-ray microtomography from cold-sprayed coatings, Le reste des moyens techniques utilisés et sur lesquels sont également formés les chercheurs relèvent des groupes dits « fonctionnels » du Centre des Matériaux de MINES, pp.187-199, 2012.
DOI : 10.1111/j.1365-2818.2012.03655.x
URL : https://hal.archives-ouvertes.fr/hal-00751923

C. Feng, V. Guipont, M. Jeandin, O. Amsellem, F. Pauchet et al., Iacob : B4C/Ni composite coatings prepared by cold spray of blended or cvd-coated powders, Journal of Thermal Spray Technology, vol.21, pp.3-4, 2012.

S. Guipont, M. Bansard, K. A. Jeandin, M. Khor, L. Nivard et al., Bond strength determination of hydroxyapatite coatings on Ti-6Al-4V substrates using the LAser Shock Adhesion Test (LASAT), Journal of Biomedical Materials Research Part A, vol.5, issue.4, pp.95-1096, 2010.
DOI : 10.1002/jbm.a.32907
URL : https://hal.archives-ouvertes.fr/hal-00542476

]. S. Beauvais, V. Guipont, M. Jeandin, D. Jeulin, A. Robisson et al., Saenger : Study of the porosity in plasma-sprayed alumina through an innovative three-dimensional simulation of the coating buildup, Metallurgical and Materials Transactions A, issue.11, pp.39-2711, 2008.

V. Guipont, M. Espanol, F. Borit, N. Llorca-isern, M. Jeandin et al., High-pressure plasma spraying of hydroxyapatite powders, Materials Science and Engineering: A, vol.325, issue.1-2, pp.9-18, 2002.
DOI : 10.1016/S0921-5093(01)01414-9

L. Gillibert, 3D Multiscale Segmentation and Morphological Analysis of Xray Microtomography from Cold-sprayed Coatings, Journal of Microscopy, p.2012
URL : https://hal.archives-ouvertes.fr/hal-00751923

V. Guipont, Bond strength determination of hydroxyapatite coatings on Ti-6Al-4V substrates using the LAser Shock Adhesion Test (LASAT), Journal of Biomedical Materials Research Part A, vol.5, issue.4, 2010.
DOI : 10.1002/jbm.a.32907
URL : https://hal.archives-ouvertes.fr/hal-00542476

S. Beauvais, Study of the Porosity in Plasma-Sprayed Alumina through an Innovative Three-Dimensional Simulation of the Coating Buildup, Metallurgical and Materials Transactions A, 2008.
DOI : 10.1007/s11661-008-9612-4
URL : https://hal.archives-ouvertes.fr/hal-00329676

V. Guipont, High-pressure plasma spraying of hydroxyapatite powders, Materials Science and Engineering: A, vol.325, issue.1-2, 2002.
DOI : 10.1016/S0921-5093(01)01414-9