R. Activités-de, 6 2.1. Analyse systémique des procédés : application à l 6 2.1.2. Choix du fluide de travail et de l'architecture thermodynamique basé sur l'analyse exergétique Application de la méthodologie aux procédés industriels à haute température (80- 120 °C), Conclusions, p.23

M. Et-de, 24 2.2.1 Echangeurs tubes à ailettes : mesures des coefficients de transfert de chaleur par évaporation dans les mini canaux, Maîtrise de la destruction d'exergie dans les échangeurs de chaleur : modélisation des phénomènes de transfert de chaleur, p.37

A. Dynamique-dans-la-méthodologie-d-'analyse-Énergétique-et-exergétique and .. , Modélisation et caractérisation d'échangeurs de chaleur non conventionnels dans l'objectif de minimiser la destruction d'exergie, Conclusions générales et projet de recherche à 4............. 39 2.3.3. Modélisation et caractérisation de pompes à chaleur en cycle transcritique pour le chauffage de fluides à haute température (>120°C) et à fort écart de températures, p.40

S. S. Bertsch, E. A. Groll, V. Suresh, and . Garimella, Effects of heat flux, mass flux, vapor quality, and saturation temperature on flow boiling heat transfer in microchannels, International Journal of Multiphase Flow, vol.35, issue.2, pp.142-154, 2009.
DOI : 10.1016/j.ijmultiphaseflow.2008.10.004

C. H. Cheng and Y. C. Cheng, Predictions of frost growth on a cold plate in atmospheric air, International Communications in Heat and Mass Transfer, vol.28, issue.7, pp.953-962, 2001.
DOI : 10.1016/S0735-1933(01)00299-8

M. G. Cooper, Heat Flow Rates in Saturated Nucleate Pool Boiling-A Wide-Ranging Examination Using Reduced Properties, In: Advances in Heat Transfer, vol.16, pp.157-239, 1984.
DOI : 10.1016/S0065-2717(08)70205-3

K. I. Choi, A. S. Pamitran, C. Y. Oh, and J. T. Oh, Boiling heat transfer of R-22, R-134a, and CO2 in horizontal smooth minichannels, International Journal of Refrigeration, vol.30, issue.8, pp.1336-1346, 2007.
DOI : 10.1016/j.ijrefrig.2007.04.007

X. Feng and X. X. Et-zhu, Combining Pinch and Exergy Analysis for Process modifications Applied Thermal Engineering, 1997.

B. W. Jones and J. Parker, Frost Formation With Varying Environmental Parameters, Journal of Heat Transfer, vol.97, issue.2, pp.97-255, 1975.
DOI : 10.1115/1.3450350

V. Suresh and . Garimella, Tannaz HarirchianEffects of channel dimension, heat flux, and mass flux on flow boiling regimes in microchannels, International Journal of Multiphase Flow, vol.35, pp.349-362, 2009.

Y. Hayashi, Study of Frost Properties Correlating With Frost Formation Types, Journal of Heat Transfer, vol.99, issue.2, pp.239-245, 1977.
DOI : 10.1115/1.3450675

G. Satish, Kandlikar Fundamental issues related to flow boiling in minichannels and microchannels, Experimental Thermal and Fluid Science, vol.26, pp.389-407, 2002.

L. Gall and R. , Experimental study and modeling of frost formation in heat exchangers, 1994.

B. Linnhoff, A user's guide on process integration for the efficient use of energy

B. Linnhoff and A. Eastwood, Overall site optimisation by Pinch Technology, Chemical Engineering Research and Design, vol.75, pp.138-144, 1997.
DOI : 10.1016/S0263-8762(97)80011-1

S. Sherif, A semi-empirical transient method for modelling frost formation on a flat plate, International Journal of Refrigeration, vol.16, issue.5, pp.321-329, 1993.
DOI : 10.1016/0140-7007(93)90004-R

Y. Tao, A mathematical model for predicting the densification and growth of frost on a flat plate, International Journal of Heat and Mass Transfer, vol.36, issue.2, pp.353-363, 1993.
DOI : 10.1016/0017-9310(93)80011-I

T. N. Tran, M. W. Wambsganss, and D. M. France, Small circular- and rectangular-channel boiling with two refrigerants, International Journal of Multiphase Flow, vol.22, issue.3, pp.485-498, 1996.
DOI : 10.1016/0301-9322(96)00002-X

R. John and . Thome, Boiling in microchannels: a review of experiment and theory, Laboratory of Heat and Mass Transfer (LTCM)

C. Toulemonde, D. Clodic, and A. Zoughaib, Electric water heater with high thermal insulation, Brevet Français 00

D. Clodic, A. Zoughaib, M. Merchat, and L. Fassi, Procédé et système d'alimentation en eau de tours aéroréfrigérantes, Brevet Français, vol.04, 51128.

H. Robidou, N. Bariteau, and A. Zoughaib, « Système de vaporisation d'un fluide cryogénique avec des échangeurs centralisés

A. Benoist, D. Dron, B. Peuportier, J. Spadaro, and A. Zoughaib, How to account for CO2 emissions from biomass in an LCA ", Int J LCA, vol.12, issue.5, p.281, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00199202

A. Rabl, J. Spadaro, and A. Zoughaib, Environmental Impacts and Costs of Municipal Solid Waste: A Comparison of Landfill and Incineration, J. Waste Management & Research, pp.26-147, 2008.

R. Slim, A. Zoughaib, and D. Clodic, Modeling of a solar and heat pump sludge drying system, Issue: 7 Pages, pp.31-1156, 2008.
DOI : 10.1016/j.ijrefrig.2008.03.003

URL : https://hal.archives-ouvertes.fr/hal-00797747

R. Slim, A. Zoughaib, and D. Clodic, Characterization of Sewage Sludge Water Vapor Diffusivity in Low-Temperature Conductive Drying, Journal of Porous Media, vol.12, issue.12, 2009.
DOI : 10.1615/JPorMedia.v12.i12.50

URL : https://hal.archives-ouvertes.fr/hal-00509588

N. Chami and A. Zoughaib, Modeling natural convection in a pitched thermosyphon system in building roofs and experimental validation using particle image velocimetry, Energy and Buildings, vol.42, issue.8, pp.1267-1274, 2010.
DOI : 10.1016/j.enbuild.2010.02.019

URL : https://hal.archives-ouvertes.fr/hal-00509373

M. Hamdar, A. Zoughaib, and D. Clodic, Flow boiling heat transfer and pressure drop of pure HFC-152a in a horizontal mini-channel, International Journal of Refrigeration, vol.33, issue.3, pp.566-577, 2010.
DOI : 10.1016/j.ijrefrig.2009.12.006

URL : https://hal.archives-ouvertes.fr/hal-00509385

E. Kinab, P. Rivière, D. Marchio, and A. Zoughaib, Reversible heat pump model for seasonal performance optimization, Energy and Buildings, vol.42, issue.12, pp.2269-2280, 2010.
DOI : 10.1016/j.enbuild.2010.07.007

URL : https://hal.archives-ouvertes.fr/hal-00769747

R. Murr, H. Thieriot, A. Zoughaib, and D. Clodic, Multi-objective optimization of a multi water-to-water heat pump system using evolutionary algorithm, Applied Energy, vol.88, issue.11, pp.3580-3591, 2011.
DOI : 10.1016/j.apenergy.2011.04.013

URL : https://hal.archives-ouvertes.fr/hal-00769627

K. Assaf, A. Zoughaib, and D. Clodic, Modelica-based modelling and simulation of dry-expansion shell-and-tube evaporators working with alternative refrigerant mixtures, International Journal of Refrigeration, vol.34, issue.6, pp.1471-1482, 2011.
DOI : 10.1016/j.ijrefrig.2011.03.010

URL : https://hal.archives-ouvertes.fr/hal-00768407

A. Rengel, A. Zoughaib, D. Dron, and D. Clodic, Hydrodynamic study of an internal airlift reactor for microalgae culture, Applied Microbiology and Biotechnology, vol.24, issue.1, pp.253-264, 1007.
DOI : 10.1007/s00253-011-3398-9

URL : https://hal.archives-ouvertes.fr/hal-00660606

A. Benoist, D. Dron, and A. Zoughaib, Origins of the debate on the life-cycle greenhouse gas emissions and energy consumption of first-generation biofuels ??? A sensitivity analysis approach, Biomass and Bioenergy, vol.40, 2012.
DOI : 10.1016/j.biombioe.2012.02.011

URL : https://hal.archives-ouvertes.fr/hal-00877153

A. Mortada, C. Zoughaib, D. Arzano-daurelle, and . Clodic, Boiling heat transfer and pressure drop of R-134a and R-1243yf in minichannels for low mass fluxes Available online 10, International Journal of Refrigeration, 2012.

S. Mortada, A. Zoughaib, D. Clodic, and C. Arzano-daurelle, Dynamic modeling of an integrated air-to-air heat pump using Modelica, International Journal of Refrigeration, vol.35, issue.5, 2012.
DOI : 10.1016/j.ijrefrig.2012.03.009

URL : https://hal.archives-ouvertes.fr/hal-00769616

. Legionella, state of the art 30 years after its recognition, 2006.

A. Conférences-internationales-À-comité-de-lecture, D. Zoughaib, and . Clodic, Technical and economical evaluation of vacuum insulated panels for European freezers, the proceedings of the International Conference on " Energy Efficiency in Household Appliances and Lighting, 2000.

A. Zoughaib and D. Clodic, Characterisation of VIPs and technico-economical study of their use in freezers, the proceedings of the 8th International Refrigeration and Air Conditioning Conference, 2000.

A. Zoughaib and D. Clodic, Comparision of energy consumption of ventilated and natural convection evaporators of refrigerators and freezers, the proceedings of the 9th International Refrigeration and Air Conditioning Conference, 2002.

D. Clodic, L. Palandre, A. Zoughaib, and L. Kuipers, Estimates of the world wide fleets of R/AC equipment to determine the refrigerant emissions; first results for domestic refrigeration, the proceedings of the Earth Technologies Forum, 2002.

A. Zoughaib and D. , Clodic, A turbo expander development for domestic refrigeration appliances, the proceedings of the 21st International Conference of Refrigeration, 2003.

A. Zoughaib, L. Palandre, and D. Clodic, Measurement of Remaining Quantities of CFC-11 in Polyurethane Foams of Refrigerators and Freezers at end of life, in the proceedings of Earth Technologies Forum, 2003.

A. Zoughaib and D. Clodic, Energy performances using ammonia as refrigerant in a large supermarket, in the proceedings of IIR conference on ammonia refrigerating systems, 2005.

A. Zoughaib and D. Clodic, Experimental study of "tube and sheet" evaporator used in domestic refrigerators, in the proceedings of IIR conference on Thermophysical properties and transfer processes of refrigerants, 2005.

C. Maatouk, A. Zoughaib, and D. Clodic, Energy performance of a new design cooling tower with zero aerosol formation, in proceedings of IIR conference, 2007.

R. Slim, A. Zoughaib, and D. Clodic, Sludge drying in a greenhouse assisted by a heat pump, proceedings of IIR conference, 2007.

B. Anthony, . Dron-dominique, and . Assaad, A relevant LCA methodology adapted to biomass-based products, Proceedings of the 8th European IFSA symposium, 2008.

N. Chami and A. Zoughaib, Modelling the solar factor of roof systems: Study of the role of radiant barriers and traditional insulation, in proceedings of IBPC, 2009.

S. Mortada, A. Zoughaib, and D. Clodic, Charge minimization in a heat pump application by using micro channel heat exchanger, in proceedings of Sustainable Refrigeration and Heat Pump Technology, 2010.

M. Sorina, Z. Assaad, A. Christine, and C. Denis, Energy efficiency of an air to air heat pump, proceedings of International Refrigeration and Air Conditioning Conference at Purdue, 2010.

C. Maatouk, A. Zoughaib, and D. Clodic, New Methodology of Characterization of Seasonal Performance Factor of An Air-To-Water Heat Pump, proceedings of International Refrigeration and Air Conditioning Conference at Purdue, 2010.

R. Murr, A. Zoughaib, and D. Clodic, Thermal Integration Of Heat Pumps In Cheese Factory, in proceedings of ECOS, 2010.

M. Chantal, A. Zoughaib, and D. Clodic, Integration of Heat pump in district heating and cooling systems, in proceedings of ECOS, 2010.

N. Ayachi, P. Mazet, E. Neveu, A. Boulawz, G. Zoughaib et al., Exergy Assessment of Recovery Solutions from Dry and Moist Gas Available at Medium Temperature, Energies, vol.5, issue.12, 2011.
DOI : 10.3390/en5030718

URL : https://hal.archives-ouvertes.fr/hal-00877123

X. Pan and A. Zoughaib, Aurélie Vuillermoz, François Luchini, Process integration in a " food canning factory, proceedings of ECOS, 2011.

C. Maatouk, A. Zoughaib, A. Rivière, and F. Luchini, Process integration, modeling and optimization for energy saving in a fresh cut salad industry, in proceeding of IIR conference, 2011.

Z. Hadid, A. Zoughaib, N. Bariteau, and H. Robidou, Modeling ice formation of heat exchangers fins, in proceeding of IIR conference, 2011.