R. Al-itry, K. Lamnawar, and A. Maazouz, Rheological, morphological, and interfacial properties of compatibilized PLA/PBAT blends, Rheologica Acta, vol.53, pp.501-518, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00998957

S. H. Anastasiadis, J. K. Chen, J. T. Koberstein, J. E. Sohn, and J. A. Emerson, The determination of polymer interfacial tension by drop image processing: Comparison of theory and experiment for the pair, poly(dimethyl siloxane)/polybutadiene, Polymer Engineering & Science, vol.26, issue.20, pp.1410-1418, 1986.

J. M. Andreas, Interfacial Tension by Pendant Drops, 1938.

G. Antonoff, On the validity of Antonoff's rule, The Journal of Physical Chemistry, vol.46, issue.4, pp.497-499, 1942.

F. Bashforth and J. C. Adams, An Attempt to Test the Theories of Capillary Action by Comparing the Theoretical and Measured Forms of Drops of Fluid, 1883.

G. Biresaw and C. J. Carriere, Interfacial tension of poly(lactic acid)/polystyrene blends, Journal of Polymer Science Part B: Polymer Physics, vol.40, issue.19, pp.2248-2258, 2002.

M. Bousmina, Rheology of polymer blends: linear model for viscoelastic emulsions, Rheologica Acta, vol.38, issue.1, pp.73-83, 1999.

M. E. Broz, D. L. Vanderhart, and N. R. Washburn, Structure and mechanical properties of poly (d, l-lactic acid)/poly (?-caprolactone) blends, Biomaterials, vol.24, issue.23, pp.4181-4190, 2003.

C. J. Carriere, A. Cohen, and C. B. Arends, Estimation of interfacial tension using shape evolution of short fibers, Journal of Rheology, vol.33, pp.681-689, 1989.

P. Desbois, V. Warzelhan, N. Niessner, A. Deffieux, and S. Carlotti, Anionic high impact polystyrene: A new process for low residual and low cost HIPS, Macromolecular Symposia, vol.240, issue.1, pp.194-205, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00396159

J. Dil, E. Carreau, P. J. Favis, and B. D. , Morphology, miscibility and continuity development in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends, Polymer, vol.68, pp.202-2012, 2015.

K. Cho, H. K. Jeon, C. E. Park, J. Kim, and K. U. Kim, The effect of endsulfonated polystyrene on the interfacial tension of nylon-6/polystyrene blends, Polymer, vol.37, issue.7, pp.1117-1122, 1996.

A. Cohen and C. J. Carriere, Analysis of a retraction mechanism for imbedded polymeric fibers, Rheologica Acta, vol.28, issue.3, pp.223-232, 1989.

N. R. Demarquette, A. M. De-souza, G. Palmer, and P. H. Macaubas, Comparison between five experimental methods to evaluate interfacial tension between molten polymers, Polymer Engineering & Science, vol.43, issue.3, pp.670-683, 2003.

P. Elemans, J. Janssen, and H. Meijer, The measurement of interfacial tension in polymer/polymer systems: The breaking thread method, Journal of Rheology, vol.34, issue.8, pp.1311-1325, 1990.

J. J. Elmendorp, A Study on Polymer Blending Microrheology, 1986.

E. Bioplastics, Institute for Bioplastics and Biocomposites, 2012.

C. Friedrich, W. Gleinser, E. Korat, D. Maier, and J. Weese, Comparison of sphere-size distributions obtained from rheology and transmission electron microscopy in PMMA/PS blends, Journal of Rheology, vol.39, pp.1411-1425, 1995.

P. G. Ghodgaonkar and U. Sundararaj, Prediction of dispersed phase drop diameter in polymer blends: The effect of elasticity, Polymer Engineering & Science, vol.36, issue.12, pp.1656-1665, 1996.

H. P. Grace, Dispersion phenomena in high viscosity immiscible fluid systems and application of static mixers as dispersion devices in such systems, Chemical Engineering Communications, vol.14, issue.3-6, pp.225-277, 1982.

H. Gramespacher and J. Meissner, Interfacial tension between polymer melts measured by shear oscillations of their blends, Journal of Rheology, vol.36, pp.1127-1141, 1992.

H. Guo, S. Packirisamy, N. V. Gvozdic, and D. J. Meier, Prediction and manipulation of the phase morphologies of multiphase polymer blends: 1. Ternary systems, Polymer, vol.38, issue.4, pp.785-794, 1997.

W. D. Harkins, A general thermodynamic theory of the spreading of liquids to form duplex films and of liquids or solids to form monolayers, The Journal of Chemical Physics, vol.9, pp.552-568, 1941.

J. L. Halary, F. Laupretre, and L. Monnerie, Mécanique des Matériaux Polymères. Editions Belin, 2008.

C. M. Hansen, The Three-Dimensional Solubility Parameter and Solvent Diffusion Coefficient, 1967.

M. Harada, T. Ohya, K. Iida, H. Hayashi, K. Hirano et al., Increased impact strength of biodegradable poly(lactic acid)/poly(butylene succinate) blend composites by using isocyanate as a reactive processing agent, Journal of Applied Polymer Science, vol.106, issue.3, 2007.

M. Hemmati, H. Nazokdast, and H. Shariat-panahi, Study on morphology of ternary polymer blends. II. Effect of composition, Journal of Applied Polymer Science, vol.82, issue.5, pp.1138-1146, 2001.

E. J. Hinch and A. Acrivos, Steady long slender droplets in two-dimensional straining motion, Journal of Fluid Mechanics, vol.91, issue.3, pp.401-414, 1979.
DOI : 10.1017/s0022112079000227

E. J. Hinch and A. Acrivos, Long slender drops in a simple shear flow, Journal of Fluid Mechanics, vol.98, issue.2, pp.305-328, 1980.

S. Y. Hobbs, M. Dekkers, and V. H. Watkins, Effect of interfacial forces on polymer blend morphologies, Polymer, vol.29, issue.9, pp.1598-1603, 1988.

J. J. Huang, H. Keskkula, and D. R. Paul, Elastomer particle morphology in ternary blends of maleated and non-maleated ethylene-based elastomers with polyamides: Role of elastomer phase miscibility, Polymer, vol.47, issue.2, pp.624-638, 2006.

O. M. Jazani, A. Arefazar, and M. H. Beheshty, Study on the effect of processing conditions on the mechanical properties of PP/PC/SEBS ternary blends using Taguchi experimental analysis, E-polymer, pp.1-14, 2010.

L. Jiang, M. P. Wolcott, and J. Zhang, Study of biodegradable polylactide/poly(butylene adipate-co-terephthalate) blends, Biomacromolecules, vol.7, issue.1, pp.199-207, 2006.
DOI : 10.1021/bm050581q

D. D. Joseph, M. S. Arney, G. Gillberg, H. Hu, D. Hultman et al., A spinning drop tensioextensometer, Journal of Rheology, vol.36, pp.621-662, 1992.
DOI : 10.1122/1.550311

A. R. Kolahchi, A. Ajji, and P. J. Carreau, Surface Morphology and Properties of Ternary Polymer Blends: Effect of the Migration of Minor Components, The Journal of Physical Chemistry B, vol.118, issue.23, pp.6316-6323, 2014.

L. Corroller, P. Favis, and B. D. , Effect of viscosity in ternary polymer blends displaying partial wetting phenomena, Polymer, vol.52, issue.17, pp.3827-3834, 2011.

A. Luciani, M. F. Champagne, and L. A. Utracki, Interfacial tension coefficient from the retraction of ellipsoidal drops, Journal of Polymer Science Part B: Polymer Physics, vol.35, issue.9, pp.1393-1403, 1997.

I. Luzinov, K. Xi, C. Pagnoulle, G. Huynh-ba, and R. Jerome, Composition effect on the core-shell morphology and mechanical properties of ternary polystyrene/styrene-butadiene rubber/polyethylene blends, Polymer, vol.40, issue.10, pp.2511-2520, 1999.

P. Macaubas and N. R. Demarquette, Morphologies and interfacial tensions of immiscible polypropylene/polystyrene blends modified with triblock copolymers, Polymer, vol.42, issue.6, p.55, 2001.

C. W. Macosko, P. Guégan, A. K. Khandpur, A. Nakayama, P. Marechal et al., Compatibilizers for melt blending: Premade block copolymers, Macromolecules, vol.29, issue.17, pp.5590-5598, 1996.

H. E. Meijer, J. M. Janssen, and P. D. Anderson, Mixing of immiscible liquids, in Mixing and Compounding of Polymers edited by Manas-Zloczower, I, 2009.

N. Nemirovski, A. Siegmann, and M. Narkis, Morphology of ternary immiscible polymer blends, Journal of Macromolecular Science, Part B: Physics, vol.34, issue.4, pp.459-475, 1995.

M. Nofar, A. Maani, H. Sojoudi, M. C. Heuzey, and P. J. Carreau, Interfacial and rheological properties of PLA/PBAT and PLA/PBSA blends and their morphological stability under shear flow, Journal of Rheology, vol.59, issue.2, pp.317-333, 2015.

T. S. Omonov, C. Harrats, and G. Groeninckx, Co-continuous and encapsulated three phase morphologies in uncompatibilized and reactively compatibilized polyamide 6/polypropylene/polystyrene ternary blends using two reactive precursors, Polymer, vol.46, issue.26, pp.12322-12336, 2005.

J. F. Palierne, Linear rheology of viscoelastic emulsions with interfacial tension, Rheologica Acta, vol.29, issue.3, pp.204-214, 1990.

H. M. Princen, I. Zia, and S. G. Mason, Measurement of interfacial tension from the shape of a rotating drop, Journal of Colloid and Interface Science, vol.23, issue.1, pp.99-107, 1967.

H. Rastin, S. H. Jafari, M. R. Saeb, A. Hossein, . Khonakdar et al., On the reliability of existing theoretical models in anticipating type of morphology and domain size in HDPE/PA-6/EVOH ternary blends, European Polymer Journal, vol.53, pp.1-12, 2014.

L. Rayleigh, On the capillary phenomena of jets, Proceedings of the Royal Society of London, vol.29, pp.71-97, 1879.

J. Reignier and B. D. Favis, Control of the subinclusion microstructure in HDPE/PS/PMMA ternary blends, Macromolecules, vol.33, issue.19, pp.6998-7008, 2000.

J. Reignier and B. D. Favis, Core-shell structure and segregation effects in composite droplet polymer blends, AIChE Journal, vol.49, issue.4, pp.1014-1023, 2003.

J. Reignier, B. D. Favis, and M. Heuzey, Factors influencing encapsulation behavior in composite droplet-type polymer blends, Polymer, vol.44, issue.1, pp.49-59, 2003.

R. Riemann, H. Cantow, and F. Chr, Interpretation of a new interface-governed relaxation process in compatibilized polymer blends, Macromolecules, vol.30, pp.5476-5480, 1997.

S. Assighaou, . Pavy-le, G. Du, and L. Benyahia, Dispositif d'observation de gouttes sous déformation: développement et validation. Rhéologie, vol.11, pp.45-56, 2007.

M. Bousmina, A. Ait-kadi, and J. B. Faisant, Determination of shear rate and viscosity from batch mixer, Journal of Rheology, vol.43, pp.415-433, 1999.

L. Jiang, M. P. Wolcott, and J. Zhang, Study of biodegradable polylactide/poly(butylene adipate-co-terephthalate) blends, Biomacromolecules, vol.7, issue.1, pp.199-207, 2006.

L. Jiang, B. Liu, and J. Zhang, Properties of poly(lactic acid)/poly(butylene adipateco-terephthalate)/nanoparticle ternary composites, Industrial & Engineering Chemistry Research, vol.48, issue.16, pp.7594-7602, 2009.

W. Lertwinmolnun, Réalisation de nanocomposites polypropylene/argile par extrusion bivis, 2006.

L. T. Lim, R. Auras, and M. Rubino, Processing technologies for poly(lactic acid), Progress in Polymer Science, vol.33, issue.8, pp.820-852, 2008.

G. I. Taylor, The viscosity of a fluid containing small drops of another fluid, Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences, vol.138, issue.834, pp.41-48, 1932.

N. Zhang, Q. Wang, J. Ren, and L. Wang, Preparation and properties of biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) blend with glycidyl methacrylate as reactive processing agent, Journal of Materials Science, vol.44, issue.1, pp.250-256, 2008.

S. Assighaou and L. Benyahia, Scaling law behaviour of the retraction of a Newtonian droplet after a strain jump in a Newtonian matrix, Rheologica Acta, vol.49, issue.6, 2010.

S. H. Anastasiadis, I. Gancarz, and J. T. Koberstein, Interfacial tension of immiscible polymer blends: temperature and molecular weight dependence, Macromolecules, vol.21, issue.10, pp.2980-2987, 1988.

G. M. Jordhamo, J. A. Manson, and L. H. Sperling, Phase continuity and inversion in polymer blends and simultaneous interpenetrating networks, Polymer Engineering & Science, vol.26, pp.517-524, 1986.

E. H. Kerner, The elastic and thermo-elastic properties of composite media, Proceedings of the Physical Society. Section B, vol.69, issue.8, pp.808-813, 1956.

L. Corroller, P. Favis, and B. D. , Effect of viscosity in ternary polymer blends displaying partial wetting phenomena, Polymer, vol.52, issue.17, pp.3827-3834, 2011.

F. Mighri and M. A. Huneault, Drop deformation and breakup mechanisms in viscoelastic model fluid systems and polymer blends, The Canadian Journal of Chemical Engineering, vol.80, issue.6, pp.1028-1035, 2002.

F. Mighri and M. A. Huneault, In situ visualization of drop deformation, erosion, and breakup in high viscosity ratio polymeric systems under high shearing stress conditions, Journal of Applied Polymer Science, vol.100, issue.4, pp.2582-2591, 2005.

G. I. Taylor, The formation of emulsions in definable fields of flow, Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences, vol.146, issue.858, pp.501-523, 1934.

I. Vinckier, P. Moldenaers, and J. Mewis, Relationship between rheology and morphology of model blends in steady shear flow, Journal of Rheology, vol.40, pp.613-631, 1996.

, 1PA-b-PBAT)/2PBAT-b-PLA

, Compatibilized, vol.80, issue.20

, 78PLA/20

, 2PA-b-PBAT)/2PBAT-b-PLA

, 1PA-b-PBAT)/3PBAT-b-PLA

, Compatibilized 70PLA/30(90PBAT/10PA)

, 2PA-b-PBAT)/3PBAT-b-PLA

, Compatibilized 70PLA/30(80PBAT/20PA)

D. Berek, Separation of parent homopolymers from diblock copolymers by liquid chromatography under limiting conditions desorption, 1-Principle of the method, Macromolecular Chemistry and Physics, vol.209, issue.7, pp.695-706, 2008.

D. Berek, Separation of parent homopolymers from diblock copolymers by liquid chromatography under limiting conditions of desorption, 2 -Optimization of experimental arrangement, Macromolecular Chemistry and Physics, vol.209, issue.21, pp.2213-2222, 2008.

D. Berek, Separation of parent homopolymers from diblock copolymers by liquid chromatography under limiting conditions of desorption. 3 -Role of column packing, Polymer, vol.51, issue.3, pp.587-596, 2010.

D. Berek, Size exclusion chromatography-a blessing and a curse of science and technology of synthetic polymers, Journal of Separation Science, vol.33, issue.3, pp.315-335, 2010.

M. Considère, Mémoire sur l'emploi du fer et de l'acier dans les constructions, Annales des Ponts et Chaussées, 6 Série, vol.9, pp.574-775, 1885.

H. Gramespacher and J. Meissner, Interfacial tension between polymer melts measured by shear oscillations of their blends, Journal of Rheology, vol.36, pp.1127-1141, 1992.

L. Jiang, M. P. Wolcott, and J. Zhang, Study of biodegradable polylactide/ poly(butylene adipate-co-terephthalate) blends, Biomacromolecules, vol.7, issue.1, pp.199-207, 2006.

R. P. Kusy and D. T. Turner, Influence of the molecular weight of poly(methyl methacrylate) on fracture morphology in notched tension, Polymer, vol.18, issue.4, pp.391-402, 1977.

L. Corroller, P. Favis, and B. D. , Effect of viscosity in ternary polymer blends displaying partial wetting phenomena, Polymer, vol.52, issue.17, pp.3827-3834, 2011.

L. Hellaye and M. , Synthèse et auto-assemblage de copolymères dibloc polyester-bpoly(acide-?-aminés), 2006.

C. W. Macosko, P. Guégan, A. K. Khandpur, A. Nakayama, P. Marechal et al., Compatibilizers for melt blending: Premade block copolymers, Macromolecules, vol.29, issue.17, pp.5590-5598, 1996.
DOI : 10.1021/ma9602482

J. F. Palierne, Linear rheology of viscoelastic emulsions with interfacial tension, Rheologica Acta, vol.29, issue.3, pp.204-214, 1990.
DOI : 10.1007/bf01331356

S. Park, I. Park, T. Chang, and C. Y. Ryu, Interaction-controlled HPLC for block copolymer analysis and separation, Journal of the American Chemical Society, vol.126, issue.29, pp.8906-8907, 2004.
DOI : 10.1021/ja047385w

G. Serpe, J. Jarrin, and F. Dawans, Morphology-processing relationships in polyethylene-polyamide blends, Polymer Engineering & Science, vol.30, issue.9, pp.553-565, 1990.
DOI : 10.1002/pen.760300908

A. Siskova, E. Macova, and D. Berek, Liquid chromatography under limiting conditions of desorption. 4. Separation of blends containing low-solubility polymers, European Polymer Journal, vol.48, issue.1, pp.155-162, 2012.

W. Voigt, Über die Beziehung zwischen den beiden Elasticitätsconstanten isotroper Körper, Annalen der Physik, vol.274, pp.573-587, 1889.
DOI : 10.1002/andp.18892741206
URL : https://zenodo.org/record/1423864/files/article.pdf