An Advanced 3D Mathematical Model for a 6-high Tandem Cold Rolling Process

Xiawei Feng (1) , Pierre Montmitonnet (2) , Quan Yang (1) , Anrui He (1) , Xiaochen Wang (1)

1 USTB - University of Science and Technology Beijing [Beijing]
2 CEMEF - Centre de Mise en Forme des Matériaux

The present paper focuses on the validation of ongoing efforts made to develop more advanced 3D mathematical model for cold rolling strip process [8]. Following [2], the model uses the multi-slab strategy to deal with the differential reduction in the transverse direction due to roll deformation, and analytical solutions of roll bending and flattening discretized by the Influence Function Method (IFM). Furthermore, the model has been extended to incorporate elastic deformation of strip and to be fit for 6-high rolling mills with shiftable work roll (WR) or Intermediate Rolls (IR) as well as 4-high mills. Validation is performed by using FEM solutions (Abaqus® implicit) as references: a 2D quasi-static model to check the slab method under rigid work roll condition; a 3D FEM to discuss the assumption of small lateral flow of strip; a comparison of FEM and IFM with regard to 6-high roller stack deformation with intermediate roll shifting. All these steps are essential to gain more insight into the mechanism of cold rolling strip and to guide future development work of the mathematical model. Abstract The present paper focuses on the validation of ongoing efforts made to develop more advanced 3D mathematical model for cold rolling strip process [8]. Following [2], the model uses the multi-slab strategy to deal with the differential reduction in the transverse direction due to roll deformation, and analytical solutions of roll bending and flattening discretized by the Influence Function Method (IFM). Furthermore, the model has been extended to incorporate elastic deformation of strip and to be fit for 6-high rolling mills with shiftable work roll (WR) or Intermediate Rolls (IR) as well as 4-high mills. Validation is performed by using FEM solutions (Abaqus® implicit) as references: a 2D quasi-static model to check the slab method under rigid work roll condition; a 3D FEM to discuss the assumption of small lateral flow of strip; a comparison of FEM and IFM with regard to 6-high roller stack deformation with intermediate roll shifting. All these steps are essential to gain more insight into the mechanism of cold rolling strip and to guide future development work of the mathematical model.

Mots clés: Cold rolling strip; Slab method; Influence Function Method; Finite Element Method Keywords: Cold rolling strip; Finite Element Method

Domaines: Matériaux

Xiawei Feng, Pierre Montmitonnet, Quan Yang, Anrui He, Xiaochen Wang. An Advanced 3D Mathematical Model for a 6-high Tandem Cold Rolling Process. Procedia Engineering, 2017, Part of special issue: International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom, 207, pp.1379 - 1384. ⟨10.1016/j.proeng.2017.10.900⟩. ⟨hal-01667779⟩